Nokia E3100PLUS Essential True Wireless Earphones User Manual
- May 15, 2024
- Nokia
Table of Contents
Nokia E3100PLUS Essential True Wireless Earphones
Contents
Powering on
Pairing mode
Charging
Case charging
Troubleshooting
Specifications
Nokia Aalin Cocontiol Tea Wmoinee Cornhanse C2400 Dine.
Bluetooth
Charging case that holds multiple charges for total playtime. Battery life depends on device settings, environment, usage and many other factors.
Safety guide
- Please read this user guide and warranty manual carefully before using the product for the First time.
- Do is line this us pride for us the route sign on users, please stop using the product immediately.
- Use only the product in environments where wireless Bluetooth®transmission is permitted.
Preventing damage to health and accidents
-
Do not listen at high volumes, especially for extended periods, to prevent hearing injury.
Please always maintain a distance of at least 10cm (3.94″) between the products’ magnetic component/s and implanted medical device/s at all times. -
Keep this product, its accessories and packaging out of reach of young children or pets, as these may pose choking hazards.
-
Do not use the product in an environment that requires your special attention (e.g. in traffic).
Preventing damage to the product and malfunctions
Always keep the product dry and avoid exposure to heat sources (including
hairdryers, heaters, prolonged strong sunlight etc.) as this may result in
product deformation or malfunction. The normal operating temperature of the
product is 0 °C-40 °C or 32 °F-104 °F.
- Please do not use any attachments, accessories, or spare parts with the product unless they are included with the product or recommended by RichGo Technology Co. Ltd.
- The product should only be cleaned, where necessary, with a soft, dry cloth. Safety instructions for lithium rechargeable batteries
Safety instructions for lithium rechargeable batteries
WARNING
In extreme cases, rechargeable batteries may leak and may cause the following
hazards if abused or misused:
- explosion
- fire development
- heat generation
- smoke or gas development
Reset
Clearing all pairings
- Choose ‘Forget device’ in Bluetooth settings
- Take earphones out of the case, click earpnones 3 times
- White LED turns on for 1 second and then turns off
- Place the earphones back into the charging case & close. The earphones can be paired again.
Intended use/Liability
RichGo will not be responsible for any indirect or consequential loss, loss of
profits or loss of data. The warranty will be void under the following
conditions, and the manufacturer reserves the right to refuse to provide
service and to demand charges for any costs of servicing from the customer.
There will be no warranty if the product has been modified or repaired by persons not authorized by the manufacturer; Mishandling or wrong application of the product, such as leaving batteries over an an extended period in the product causing battery fluid leakage or applying the wrong voltage, manual destruction, damage caused by natural disaster or accident; Product caused by impact sand or liquid damage, tampering, or operating failure; Install and maintain product without following instructions provided by the manufacturer; If the model number or item code attached to the product has been erased or modified; Modify without authorization the contents of this warranty policy.
If the product has been used for commercial, display, demonstration or rental purposes. All parts replaced within the warranty period are properties of the manufacturer. We have the right to handle those parts as necessary. Warranty covers only the hardware of the product’s main body. All other accessories are not covered within the warranty terms, such as external connection cable, power cable, computer cables, software, CD, external cover/cabinet and user manual. (For item description and accessories, please refer to the user manual/instruction manual/user guide)
Manufacturer Declarations
More information on legal compliance labels can be found at the end of this
document. Always return your used electronic products, batteries, and
packaging materials to dedicated collection points. This way you help prevent
uncontrolled waste disposal and promote the recycling of materials. Electrical
and electronic products contain a lot of valuable materials, including metals
(such as copper, aluminium, steel, and magnesium) and precious metals (such as
gold, silver, and palladium). All materials of the device can be recovered as
materials and energy.
The crossed-out wheelie bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products and batteries must be taken to separate collections at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
FCC Statement
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure without restriction.