FineIn STI7H6X-F01 Anti Lost Device User Manual
- June 16, 2024
- FineIn
Table of Contents
FineIn STI7H6X-F01 Anti Lost Device
Product Information
Specifications
- Product Name: FineIn Tag
- Function Button: Press once to turn it on
- Power Indicator: Beep once when powered on
- Connectivity: Bluetooth
Product Usage Instructions
Turning on the FineIn Tag
Press the FineIn Tag Function Button once to turn it on. It should beep once to indicate that it is powered on.
Setting up the FineIn Tag
- Once your FineIn Tag is located, tap “Connect”.
- Tap on your FineIn Tag from the list.
- Tap “Play Sound” to make your FineIn Tag beep.
- Tap “Finish” and your FineIn Tag will be set up and ready to be used.
Finding the FineIn Tag’s Location
To find your FineIn Tag’s location:
- Tap on your FineIn Tag from the list.
- Your FineIn Tag’s location will appear on the map with a time stamp of when the item was located.
- To navigate to the FineIn Tag’s location, tap “Directions” to open Apple Maps.
Notifications
You will receive a notification when you leave your FineIn Tag behind and it’s no longer in range of your device.
When your FineIn Tag is seen by another Find My network device, you will receive a notification of its location. Note: “Notify When Found” can only be activated when your FineIn Tag is out of range.
Resetting and Removing the FineIn Tag
To reset the FineIn Tag:
- Tap on your FineIn Tag from the list.
- Select “Reset FineIn Tag”.
To remove the FineIn Tag:
- Tap on your FineIn Tag from the list.
- Select “Remove The FineIn Tag”.
FAQ
Q: What should I do if my FineIn Tag is lost? A: If your FineIn Tag is lost, follow the instructions for finding the FineIn Tag’s location and use the “Play Sound” feature to help locate it. Q: Can I receive notifications when my FineIn Tag is found by another device? A: Yes, you will receive a notification when your FineIn Tag is seen by another Find My network device. Q: How do I reset or remove the FineIn Tag? A: To reset the FineIn Tag, tap on it from the list and select “Reset FineIn Tag”. To remove the FineIn Tag, tap on it from the list and select “Remove The FineIn Tag”.
Getting Started
Power On / Off:
• Press the Fineln Tag Function Button once to turn it on.It should beep once
to indicate that it is powered on
• To power off, hold the same button for at least three seconds. You will hear
two beeps to indicate that your Fineln Tag is powered off.
Check For Updates:
To use the Find My app to locate this Fineln Tag, the letom mended. The Find lems app on sole Watche requires the latest version of watchos®.
Add Your Fineln Tag
Start The App
Open Find My™ app on your supported iPhone or iPad.
Connect Your Fineln Tag
- Press the function button once to power on your FineIn Tag
- Tapt, then “Add Other Item”.
- Once your FineIn Tag is located, tap “Connect”.
- Enter a name and choose an emoji for your and tap”Continue”.
- Find My™ will ask for confirmation to add your FineIn Tag to your Apple ID Tap “Agree”
- Tap “Finish” and your FineIn Tag will be set up and ready to be used.
Locate Your Fineln Tag
Find Finein Tag When It’s Nearby:
- Open Find My™™ app and select the “Items” tab or open the Find Items app on your Apple Watch.
- Tap on your Fineln Tag from the list
- Tap “Play Sound” to make your FineIn Tag beep.
- Tap “Stop Sound” to stop the beeps once you find them.
Find FineIn Tag’s Location:
- Open Find My app and select the “Items” tab or open the Find Items app on your Apple Watch.
- Tap on your FineIn Tag from the list
- Your FineIn Tag’s location will appear on theMap with a time stamp of when the item was located
- To navigate to the FineIn Tag’s location, tap ”
Directions” to open Apple Maps.
Notifications
Enabling”Notify When Left Behind”:
-
Open Find My™ app and select the “Items” tab or open the Find Items app on your Apple Watch.
Tap on your Fineh Tag from the list -
Under “Notifications” enable the “Notify When Left Behind” toggle.
-
You will receive a notification when you leave your Fineln
-
Tag behind and it’s no longer in range of your device.
Enabling” Notify When Found”:
- Under “Notifications”, enable the “Notify When Found” toggle.
- When your Fineln Tag is seen by another Find My network device,you will receive a notification of its location.
- Note:”Notify When Found”can only be activated when your Fineln Tag is out of range.
When Your Fineln Tag Lost
Enabling”Lost Mode”:
-
Open Find My™ app and select the “Items” tab or open the Find Items app on your Apple Watch.
Tap on your Fineln Tag from the list. -
Under “Lost Mode” tap “Enable”
-
A screen detailing Lost Mode will pop up, tap “Continue”.
-
Enter your phone number or email address and tap “Next”.
-
You may enter a message that will be shared with the person that finds your item.
-
Tap “Activate” to enable “Lost Mode”
-
Note: When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
-
Note: When”Lost Mode” is enabled your Fineln Tag is locked and cannot be paired to a new device.
Reset FineIn Tag
Remove The Fineln Tag From Find My™”App:
- Open Find My™ app and select the “Items” tab.
- Tap on your Fineln Tag from the list.
- Please ensure”Lost Mode” is disabled.
- Scroll to the bottom of the screen and tap “Remove [tem.”
- A summary will open, tap “Remove” to confirm.
Factory Reset Your Fineln Tag:
- After successfully removing the Fineln Tag from the Find MyTM app, press the iTag’s function button four times rapidly and then hold it a fifth time until you hear a ringing chime.
- Threw apule Tag. is now reset and ready to be paired to a new Apple ID.
Extras
Replace The Battery:
- Slide the opening slider on the back of your FineIn Tag to carefully open the shells.
- Replace the battery with a new CR2016 battery placing it positive side up (text facing up).
- Carefully close the iTag by aligning the top hole on both sides.
Unwanted tracking:
If any Find My network accessory separated from its owner is seen moving with
you over time, you’ll be notified in one of two ways:
- If you have an iPhone, iPad, or iPod touch, Find My will send notification to your Apple device.This feature is available on iOS or iPados 14.5 or later.
- If you don’t have an iOS device or a smartphone, a Find My network accessory that isn’t with its owner for a period of time will emit a sound when it’s moved.
These features were created specifically to discourage people from trying to track you without your knowledge.
The Fine Print
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or Tv interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My Network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark of Cisco and is used under license.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Anti-lost Device
Model No. : ST17H6X-F01
Power Input: DC3V –, 0.15A
FCC ID: 2BD4U-FINEIN
Shen Zhen Zhi Tong World Electronics Co., Ltd.