tuya H302 Smart Lock User Guide
- June 16, 2024
- Tuya
Table of Contents
tuya H302 Smart Lock
Parameters
- Model : H302
- Size : Front W70mmxH155mmxT12mm
- Back: W71mmxH162mmxT30mm
- Material: Shell tempered glass panel lock body zinc
- Weight : 1.8 KG (package gross weight)
- Communication: technology Bluetooth4.1ble
- Support system: Android 5.0/IOS7.0or above
- Stan d b y current: “’35μA
- Operating current : “‘200 mA
- Power supply mode : 4 AA
- Battery (5) Unlocking time : “‘ 1.5 seconds
Parts
install (Left Open Door) Knob anti-clockwise to unlock
- Please try turning the knob to unlock and lock to ensure the switch works normally
- If you have a problem on unlock or lock, please check the knob unlock direction
Exploded Views
Q &A
- Q: How to use the Keypad to Unlock?
- A : Enter the correct code, and press “#” to unlock. Press “#” to reset your input.
- Q: How to use the Keypad to Lock?
- A : Long press “#” to lock.
- Q: What is Rubber Blanket used for?
- A: Optional blanket for the front panel.
install(Right Open Door) Knob clockwise to unlock
- Please try turning the knob to unlock and lock to ensure the switch works normally
- If you have a problem on unlock or lock, please check the knob unlock direction
App Use
Download
Remove Device
The device is bound to the account. If you are not the last owner of the device, please ask the last owner to remove it.
Download TuyaSmart before adding the device, register, and log in.
Add Device
Turn on Bluetooth then add a device. We recommend that you use your own account to add devices.
Lock & Unlock
Long press to unlock. Default: Auto lock after electronic unlock in 5 sec.
Password & Fingerprint
Slide to obtain the dynamic password. In the settings page, set fingerprint, password, and temporary password.
Remote Control
(Need Tuya Bluetooth gateway)
- If you do need a remote control, you can get a Tuya Bluetooth gateway, add the device to the gateway to control it.
Voice Control
(Need Tuya Bluetooth gateway)
- Support Alexa, you need the Amazon account and the amazon voice device for voice control.
FCC STATEMENT
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate tne equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>