Maipai VM08 Wireless Ergnomic Mouse User Manual
- June 16, 2024
- Maipai
Table of Contents
User Manual
6D Wireless Ergnomic Mouse
Part#: A05002
+ 1 800.263.4462
custsupport@codiworldwide.com
Copyright
No part of this publication may be reproduced in any form by any means without prior written permission. Regardless of any direct acknowledgment elsewhere in the body of this document, CO Di hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Warranty Information
CODi offers a non-transferable, I Year Limited Warranty, from date of
purchase, to the original purchaser, who has properly registered the Product
through www.codiwortdwide.com/product-
registration.
CODi warrants that all products will be free from defects in workmanship and
materials under normal use, for 12 months, unless otherwise specified in a
Product Specification Sheet (“Limited Warranty”)
FCC Statement
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However there is no guarantee the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna:
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
- Consult the dealer or an experience radio/TV technician for help
Changes or modifications not authorized by the party responsible for
compliance could void the user’s authority to operate this product.
Hereby, CODi Acquisition LLC declares that the radio equipment type A05002 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.CODiWorldwide.com
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
In the Box
A. (1) Wireless mouse
B. (1) Wireless dongle
C. (1) User manual
D. (1) AA battery
The state of California requires the following statement: wAune cancer and Re productive Harm –www.P65Waring.ca.gov
Product Overview
- Left Button
- Right Button
- Scroll Wheel/ Middle Button
- 2.4Ghz light
- Bluetooth l (BTl) light
- Bluetooth 2 (BT2) light
- Low Battery indicator light
- Mode select
- Forward
- Backward
- DPI Switch
- Optical sensor
- Power Switch
- Battery cover
Operating Instructions
2.4Ghz Connection:
Remove/open the back battery cover on the mouse
Insert (1) AA battery
Take out the USB wireless receiver dongle
Insert the dongle into the USB port of your device
Move the Power Switch position to “ON”
Press the Mode Select button until the indicator light beside 2.4Ghz ” is
white
Bluetooth Connection:
- Remove/open the back battery cover on the mouse
- Insert (1) AA battery
- Move the Power Switch position to “ON”
- Press the Mode Select button until the white light next to “BTI” is illuminated
- Hold the Mode Switch button for 3-5 seconds until the white indicator light begins flashing to indicate that the mouse has entered Bluetooth pairing mode
- On your device, select “CODi A05002” in pairing menu to complete connection
Repeat steps 1-5 to setup BT2 mode
Product Specifications
Switches | 3 million clicks |
---|---|
DPI | Up to 4,000 DPI (1000/2000/3000/4000 DPI) |
Tracking Speed | 30in/sec |
Acceleration | 10G |
Product Dimensions | 4.3in x 3in x 2.9in |
Compatibility | Windows 7/8/10/11, Mac 10.0 & higher |
Precautions
- Do NOT expose this product to rain or other wet conditions
- Do NOT disassemble, repair or modify this product
- Store and use this product at room temperature
- Do NOT drop this product in order to avoid damage
- Unauthorized removal of components will void product warranty