URZ0987 Laminator A4 Rebel User Manual
- June 13, 2024
- Rebel
Table of Contents
Rebel URZ0987 Laminator A4
Product Information:
The COMP LAMINATOR is a device used for laminating documents. It has a model number URZ0987 and supports multiple languages including German (DE), English (EN), Polish (PL), and Romanian (RO). The laminator features a film entry slot, a power button, a device readiness indicator, a power supply indicator, and a jam release button. It is designed for household use only and should not be used for commercial or industrial purposes.
Product Usage Instructions
To use the COMP LAMINATOR, follow these steps:
- Connect the power cord to the power supply socket.
- Set the power button to the ON position. The power indicator will light up.
- Wait for about 3 – 5 minutes until the device’s readiness indicator lights up, indicating that the laminator is ready to use.
- To laminate a document, insert a sheet of paper between layers of laminating film.
- Insert the prepared sheet into the film entry slot, making sure to insert it with the welded edge.
- If the laminated document gets jammed in the machine, turn off the laminator, slide the jam release button, and pull out the laminated document.
- When you finish your work, turn off the laminator and allow it to cool down.
Note: There may be a distinctive odor when the device is operating, which is normal.
Cleaning and Maintenance:
For cleaning and maintenance of the COMP LAMINATOR, refer to the user manual
for detailed instructions.
Specification:
For the detailed specification of the COMP LAMINATOR, refer to the user manual
or product documentation.
OVERVIEW
- Film entry slot
- Power button
- Device readiness indicator
- Power indicator
- Jam release button
SAFETY INSTRUCTIONS
In order to reduce the injuries or damages, follow basic safety precautions applied when using any electrical device, including the following:
- Read the entire instruction manual before you start installation and assembly and keep it for future reference. Keep the manual for future reference.
- Before connecting the device to power supply socket, make sure the voltage indicated on the device corresponds to the voltage in the power supply socket.
- Place the device on flat, stable surface.
- Protect this device from shock and being dropped.
- Clean this device in accordance to instructions listed in Cleaning and Maintenace section.
- ALWAYS turn off the device and disconnect it from the mains supply:
- if it’s not operating correctly
- if there’s an uncommon voice when using
- before disassembling the device
- before cleaning
- when not in use
- When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
- This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
- Keep the device and AC adapter away from heat, water, moisture, sharp edges and any other factor which may damage the appliance or its cord.
- Do not place the appliance in water or any liquid; nor handle/use it with wet or moist hands.
- Do not use the product for purposes different from displayed in this operating manual.
- Do not use unauthorized accessories.
- Appliance for household use only. Do not use it for commercial or industrial purposes. Device for indoor use only.
- DO NOT use this device if the AC adaper is damaged or the appliance is broken.
- Do not attempt to repair this device yourself. Only authorized and qualified personnel may repair this device. The device has no user serviceable parts inside.
- Do not place the device on soft surfaces such as a bed or sofa, as this could cause the device to tip over.
OPERATION
- Connect the power cord to the power supply socket.
- Then set the power button to the ON position. The power indicator will be lit.
- After about 3 – 5 minutes, the device’s readiness indicator will light up. Laminator is ready to use.
- To laminate a document, insert a sheet of paper between layers of laminating film.
- The sheet prepared in this way should be inserted into the film entry slot, remembering to insert it with the welded edge.
- If the laminated document gets jammed in the machine, turn it off, then slide the jam release button and pull out the laminated document.
- When the work is finished, turn off the laminator and wait for it to cool down.
Note: There may be a distinctive odor when the device is operating.
This is a normal.
CLEANING AND MAINTENANCE
- Always disconnect the product form the power mains before cleaning.
- Clean the device with a soft, slightly damp cloth.
- Do not use any chemical agents to clean this device.
SPECIFICATION
- Film thickness: 140 (2 x 70) – 250 (125 x 2) μ
- Max. document thickness: 0,6 mm
- Max. document size: A4
- Lamination type: hot
- Warm up time: 3 – 5 min.
- Laminating speed: approx. 230 mm / min
- Standby signaling: yes
- Removing a jammed document: yes
- Auto shut-off: no
- Display: no
- Power: 265 W
- Power supply: 230 – 240 V; 50 Hz
- Power cord length: 122 cm
- Dimensions: 33 x 11,5 x 6,5 cm
- Weight: 770 g
- In set: 100 pcs A4 film
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature,
indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1,08-400
Miętne.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>