Xuanfeng V3 Bluetooth Keyboard Instructions
- June 16, 2024
- Xuanfeng
Table of Contents
V3 Bluetooth Keyboard
Instructions
V3 Bluetooth Keyboard
-
Product Scope of Application
The keyboard is connected to related devices in two working modes using the Bluetooth 2.4G standard Control, product wired and 2.4G mode can run on computers Win7, Win8, Win10,Win11, MAC and other systems. -
Hardware requirements
Having a Bluetooth system or computer, with a USB port available for connecting devices. -
Switch indication
-
Indicator light
7 indicator lights: NUMLOCK (green), CAPSLOCK (green), 2.4G indicatorLight (green), BT1 indicator light (blue), BT2 indicator light (blue), lowPressure lamp (red), charging lamp (red).
- When the CAPS light NUM light is on and the button is released for 2MIN, the CAPS lightThe NUM light will automatically turn off.
- When the battery is at a low voltage of around 3.3V, the low voltage indicator light (red) will slowly flash.
- When charging, the charging indicator light is always on and off when fully charged.
-
Sleep and Wake
After releasing the button for 30 minutes, the keyboard enters sleep mode and then wakes up by pressing any key. -
Game mode lighting settings
Color backlight constant brightness mode, with five levels of backlight brightness (first level off ->second level ->third level -) Fourth gear – fifth gear).Default third gear,
FN+PGUP backlight brightness increase,
FN+PGDN backlight brightness reduction,
FN+SCRLK switch The backlight on the keyboard is always on by default when powered on, and the backlight is turned off after 2 minutes of inactivity,When the battery is low voltage, the backlight actively turns off. -
Button composite function
Combination| function| Combination| function
---|---|---|---
FN+F1| multi-media| FN+F8| Next song
FN+F2| Vol| FN+F9| mail
FN+F3| Volume increase| FN+F10| homepage
FN+F4| mute| FN+F11| keypad lock
FN+F5| cease| FN+F12| calculator
FN+F6| Previous song| |
FN+F7| play/pause| | -
Connection method:
Short press the FN+1 combination key on the keyboard to switch to 2.4G mode, and turn the two speed power switch to “ON”In the state, turn the three segment switch of the mouse to “2.4G”, and at this time, insert the receiver at close range Using a receiver, the keyboard can be used normally.
Bluetooth Name (EWEADN-V3 3.0)
Bluetooth Name (EWEADN-V3 5.0)
Bluetooth Name (EWEADN-V3)
Short press the FN+2 combination key on the keyboard to switch to Bluetooth 1 mode, and short press the FN+3 combination key to switch to Bluetooth 1 modeBluetooth 2 mode, with two power switches turned to “ON” and three mouse switches turnedAt ‘ ‘, the Bluetooth device is paired and the mouse button can be used normally after successful pairing. -
List of items
1. Keyboard
2. 2.4G receiver
3. TYPE-C charging cable
4. Manual warranty card
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Authorized by: Yuandao Industrial (Shenzhen) Co., Ltd
Room 1610, 16th Floor, Jinhao Building, No.109 Fuyong Section, Guangshen Road,
Bao’an District, Shenzhen
Manufacturer: Jiangxi Jichi Technology Co., Ltd
Building 3, Godfrey Industrial Park, Lvbao Avenue, Qingyuan District, Ji’an
City, Jiangxi Province
Contact number: 0755-23089616
Website: www.eweadn.cn
Product execution standard number: Keyboard GB/T 14081-2010 Mouse GB/T
26245-2010
Attention: The product pictures are for reference only and may differ from the
actual product. Please refer to the actual
product. We apologize for any inconvenience caused!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>