Shenzhen Xuanfeng Innovations Technology FD01 Fast Wireless Car Charger User Manual
- June 6, 2024
- Shenzhen Xuanfeng Innovations Technology
Table of Contents
User Manual
Fast Wireless Car Charger
Product Features
- Smart touch button and LED indicator on both sides, fully automatic induction,one-hand operation.
- Build-in wireless charging transmitter, support Qi wireless charging for all Qi-enabled smartphones.
- Adjustable feet suitable for phones of different sizes, anti-slip silicone on both arms and feet, Type-C charging port.
- Built-in stepper motor works noiselessly.
- NPO capacitors ensure lower charging temperature and higher charging efficiency.
- Standby mode: the green and blue LED indicator light flashes alternatively, then the green indicator light keeps on.
- Charging mode: the blue LED indicator light keeps on.
- FOD function. When metal or magnet objects are on the charger, the blue and green LED indicator light flash 6 times for reminding.
- Perfect protection function based on over-voltage protection, over current protection, over-temperature protection, and short circuit protection.
Specifications
Input| DC5V 2A
DC9V 1.67A
---|---
Output| 10W/7.5W15W
Product Standard| Qi
Charging Distance| <5mm
Charging Efficiency| <80%
Product Dimension| 4120x50x65mm
Product Material| ABS+PC
*Fast wireless charging requires QC2.0/3.0 quick car charger.
Product Operating Guide
- Please make sure the product is power supplied.
- The green LED indicator light keeps on once the charger is power supplied.
- The LED indicator light will flash and the product will stop charging when the current is too large or there is a foreign object on the charger. Do not charge the phone in these situations.
- Touch the power button to open the two arms and place the phone on the charger, then the phone will start wireless charging and the two arms lock automatically. Only need to touch the power button to release two arms if you want to take out the phone.
- Wireless receiver module or case is not included in this product. Please purchase them separately if your phone does not support wireless charging.
Attention
- Please do not vigorously extrude or bump the product.
- Please do not dismantle the product. Do not put it on fire or drop it in water.
- Please do not use it in severely high temperatures, high humidity or corrosive environment to avoid damage to the circuit.
- Please do not put a magnetic card or chip card ( such as an ID card, bank card, etc) on the charging pad to prevent the card from losing effectiveness.
- Please do not put metal (such as coins etc) on the charging pad to avoid damage from heating.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radiocommunication. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
or the user is encouraged to try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions(1) This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation. RF Exposure
StatementTo maintain compliance with FCC’s RF exposure guidelines, This
equipment should be installed and operated with a minimum distance of 20cm the
radiator your body. This device and its antenna(s) must not be co-located or
operated in conjunction with any other antenna or transmitter.