Shenzhen Xuanfeng Innovations Technology D2D3 3 In 1 Wireless Charger User Manual

Xuanfeng Innovations Technology D2D3 3 In 1 Wireless Charger
User Manual

Product Overview Compatibility

• Smartphone: All Qi-compatible smartphones
• Earbuds: All Qi-compatible earbuds charging cases
• Smartwatch: Samsung Galaxy Watch 4 /
• Samsung Galaxy Watch 4 Classic / Samsung Galaxy Watch /
• Samsung Galaxy Watch 3 / Samsung Galaxy Watch Active /
• Samsung Galaxy Watch Active 2 / Samsung Gear S2 /
• Samsung Gear 53 / Samsung Gear S4 / Samsung Gear Sport

User Instruction

Step 1: Plugin a QC3.0/PD charging adapter. A low-power charging adapter might not work.
Step 2: Put your phone, earbuds charging case or smartwatch on the device for wireless charging.
(Note: The smartwatch charging pad will only work for some specific models of Samsung watches.)

Indicator Light Guide

flashes

Specification

• Input: 9V/2A 5V/3A
• Charging Cellphone Output: 15W/10W/7.5W/5W
• Charging Watch Output: 2.5W
• Charging Earbuds Output: 5W
• Charging Standard: Qi Compatible

Important Reminder

1. For maximum charging speed, please use a cable and an adapter compatible with QC (Quick Charge) 2.0/3.0 or PD (Power Delivery) fast charging.
2. Any phone case or earbuds case thicker than 5mm will stop this charger from working properly.

Warning

1. Never disassemble the device, keep it away from corrosive liquids and fire.
2. This device might not work in extreme temperatures, i.e.below 0°C (32°F) or above 60°C (140°F).
3. Never expose this device in an extremely humid, hot, or corrosive environment.

Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Warning Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This device complies with part 18 of the FCC Rules. Information to the user.

1. the device has potential interference, but the interference is very small and meets the requirements of the FCC rule
2. Equipment system maintenance is simple, please refer to the manual
3. The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.

RF exposure compliance statement:
The equipment complies with the FCC Radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>