RYOBI PCL615B ONE+ 18V Cordless VERSE Clamp Speaker User Guide
- June 12, 2024
- RYOBI
Table of Contents
RYOBI PCL615B ONE+ 18V Cordless VERSE Clamp Speaker
Product Information
The Clamp Speaker is a wireless speaker that allows you to enjoy high-quality audio in your home or on the go. It has a compact design and is easy to set up and connect to other speakers for a surround sound experience. The speaker features a power button and a connect button, which indicate the status of the device through different light colors. The product is compliant with FCC and IC regulatory standards for radiation exposure and interference.
Product Usage Instructions
- Primary/Single Speaker Setup:
- Press the POWER button on the speaker.
* Power Button Light:
* Blinking – Searching for Device
* Solid – Connected to Device
- Connect Primary to Additional Speakers:
- Press the CONNECT button on the PRIMARY speaker.
- Power on the additional speaker(s) and press the CONNECT button.
* Connect Button Light:
* Red – Primary Speaker
* Green – Secondary Speaker
For additional resources, you can scan the provided QR code or visit the manufacturer’s website.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF Exposure: This equipment complies with FCC and IC radiation exposure limits. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
HOW-TO VIDEO
PRIMARY/SINGLE SPEAKER SET-UP
- Step 1: Press the POWER button on the speaker.
- Step 2: Turn on the BLUETOOTH® device and search for CLAMP SPEAKER in your BLUETOOTH® settings.
Power Button Light
- Blinking – Searching for Device
- Solid – Connected to Device
CONNECT PRIMARY TO ADDITIONAL SPEAKERS
- Step 3: Press CONNECT button on the PRIMARY speaker.
- Step 4: Power on the additional speaker(s) and press the CONNECT button.
Connect Button Light
- Red – Primary Speaker
- Green – Secondary Speaker
FCC STATEMENT
FCC regulatory conformance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
IC regulatory conformance
- This device complies with CAN ICES-003 (B)/NMB-003(B).
- This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FOR ADDITIONAL RESOURCES SCAN OR CLICK HERE
Documents / Resources
|
RYOBI PCL615B ONE+ 18V Cordless VERSE Clamp
Speaker
[pdf] User Guide
PCL615B ONE 18V Cordless VERSE Clamp Speaker, PCL615B, ONE 18V Cordless VERSE
Clamp Speaker, Cordless VERSE Clamp Speaker, VERSE Clamp Speaker, Clamp
Speaker, Speaker
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>