BRESSER Hunter 10×25 Pocket Compact Binoculars Instruction Manual

June 4, 2024
BRESSER

BRESSER Hunter 10×25 Pocket Compact Binoculars

BRESSER-Hunter-10x25-Pocket-Compact-Binoculars-product-
image

BRESSER-Hunter-10x25-Pocket-Compact-Binoculars-01 BRESSER-Hunter-10x25-Pocket-Compact-Binoculars-02 BRESSER-Hunter-10x25-Pocket-Compact-Binoculars-03

General Safety Informations!

RISK of physical injury!
Never look through this device directly at or near the sun. There is a risk of BLINDING YOURSELF!

Children should only use this device under supervision. Keep packaging ma- terials (plastic bags, rubber bands, etc.) away from children. There is a risk of SUFFOCATION.

Fire/Burning RISK!
Never subject the device – especially the lenses – to direct sunlight. Light ray concentration can cause fires and/or burns.

RISK of material damage!
Never take the device apart. Please consult your dealer if there are any defects. The dealer will contact our service centre and send the device in for repair if needed.
Do not subject the device to temperatures exceeding 60° C!

List of Parts
  1. Centre axle

  2. Twist-up eyecups
    or

  3. Rubber eyecups

  4. Dioptre adjustment E Body of the binoculars

  5. Lens tube

  6. Central focussing wheel

  7. Eyepiece

  8. Objective lens

  9. Image circle with correctly set eye distance

Eyepieces for spectacle wearers
Depending on the model, your binoculars are equipped with either twist-up eye- cups (2a) or rubber eyecups (2b). Since there is a larger distance between the binocular eyepiece and the pupil for those wearing glasses, both eyecup varie- ties can be adjusted individually.

Twist-up Eyecups (2a)

Screw in the twist-up eyecups (2a) to use the binoculars while wearing glasses. If you are not wearing glasses, unscrew the eyecups to achieve the required distance from the pupils.

Rubber Eyecups

To use the binoculars while wearing glasses, turn the rubber eyecups (2b) to- wards the sides and down. If you are not wearing glasses, leave the eyecups in the upright position to achieve the required distance from the pupils.

Adjusting the eyepiece distance
The distance between the eyes differs between individuals. To achieve perfect interaction between your eyes and the eyepieces of your binoculars set the an- gle at the centre of the binoculars (1) so that you see a circular image (12). Note this setting for later use.

Adjusting the focus
Look through your binoculars with your right eye closed. Now adjust the image for your left eye using the centre wheel (6) until it is sharp and clear. Close your left eye and adjust the image for your right eye using the diopter ring (3) until it too is sharp and clear.

TIPS on cleaning
Lenses (eyepieces and object lenses) should be cleaned with a soft, lint-free cloth (e.g. micro fibre) only. Do not use excessive pressure – this may scratch the lens.

Dampen the cleaning cloth with a spectacle cleaning fluid and use it on very dirty lenses.
Protect the device against dirt and dust. Leave it to dry properly after use at room temperature. Then put the dust caps on and store the device in the case provided.

Warranty & Service

The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guaran-tee terms as well as information on extending the guarantee peri-od and details of our services at www.bresser.de/warranty_terms.

Bresser GmbH
Gutenbergstr. 2
DE-46414 Rhede
Germany

www.bresser.de
[email protected]

Service Hotline:
+49 (0) 28 72-80 74-210

Bresser France SARL
Parc d’activités de Nicopolis
260, rue des Romarins
83170 Brignoles · France
www.bresser.fr
[email protected]

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BRESSER User Manuals

Related Manuals