Schneider Electric GV3P32 TeSys Deca Manual Starter and Protector Installation Guide

: June 16, 2024
: Schneider Electric

Table of Contents

Schneider Electric GV3P32 TeSys Deca Manual Starter and Protector
Product Information
Product Usage Instructions
Usage Instructions
Technical Specification
Documents / Resources

Schneider Electric GV3P32 TeSys Deca Manual Starter and Protector

Product Information

Specifications

Brand: Schneider Electric
Product: GV3P32
Description: TeSys Deca GV3P MOTOR CB THERM/MAG 23-32A EVERLINK
Compliance status: RoHS (10 substances) – Compliant with exemptions 6(a), 6(c)

Product Usage Instructions

Introduction

The Schneider Electric GV3P32 is a motor circuit breaker designed for protecting and controlling motors. This product is compliant with the RoHS (Restriction of Hazardous Substances) directive, ensuring its environmental friendliness and safety.

Installation

Before installing the GV3P32 motor circuit breaker, carefully read and follow the installation instructions provided in the product manual. Ensure that the power supply is disconnected before starting the installation process.

Choose an appropriate location to mount the motor circuit breaker, considering factors such as accessibility and ventilation.
Connect the incoming power supply to the appropriate terminals on the GV3P32.
Connect the motor load to the corresponding terminals on the motor circuit breaker.
Ensure all connections are secure and properly tightened.

Operation

Once the GV3P32 motor circuit breaker is installed, follow these steps to operate it:

Ensure that the power supply is connected and turned on.
To start the motor, press the ON button on the motor circuit breaker.
To stop the motor, press the OFF button on the motor circuit breaker.
Monitor the motor circuit breaker for any abnormal behavior or tripping. If the motor circuit breaker trips, investigate and resolve the underlying issue before resetting it.

Maintenance and Troubleshooting

To ensure the optimal performance of the GV3P32 motor circuit breaker, regular maintenance is recommended:

Periodically inspect the motor circuit breaker for any signs of damage or wear.
Clean the motor circuit breaker and its surroundings to remove any dust or debris that may affect its operation.
If any issues or malfunctions are encountered, refer to the troubleshooting section of the product manual or contact Schneider Electric Customer Care Centers for assistance.

FAQ

Q: What is the compliance status of the GV3P32 motor circuit breaker?

A: The GV3P32 motor circuit breaker is compliant with the RoHS directive (10 substances) and is compliant with exemptions 6(a) and 6(c).

Q: Where can I find more information about Schneider Electric’s environmental commitment?

A: You can find more information about Schneider Electric’s environmental commitment on the Green Premium webpage.

Usage Instructions

Schneider Electric Industries

Date: Wednesday, May 17, 2023
Object: Schneider Electric RoHS declaration (RoHS: Restriction of Hazardous Substances) Dear Customer,
Effective July 1st, 2006, the European Directive 2002/95/EC -“Restriction of Hazardous Substances” (RoHS), its recast 2011/65/EU of June 8th, 2011, the Delegated Directive (EU) 2015/863 of March 31st 2015, restricts the use in Europe in certain electrical and/or electronic equipment of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE) flame retardant, and from July 22nd 2019, Bis(2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP), Dibutyl phthalate (DBP), Diisobutyl phthalate (DIBP).
Schneider Electric decided to make RoHS compliance of its products one of its priorities, even if they do not fall in RoHS’s scope, and most of Schneider Electric’s products are RoHS compliant. This stance is fully in line with Schneider Electric’s environmental policy and EN IEC 63000:2018 standard.
The information below provides the current product status according to regulation in force at the date of publication of this present document. Any future changes, either in product design or in the Directive may change the status reported here. In case the product is inside the legal scope of RoHS, please note that this document is not the CE declaration. To access to the CE declaration, please refer to the Schneider Electric download center. In the context of the sustainable development policy of our Company, we continuously work towards products and services that reduce the impact on the environment or human health when used for their intended purpose and in conditions stated in the documentation provided by Schneider Electric.
In the following declaration, a “Proactive compliance” wording means that the product is not an EEE or not in the legal scope of the regulation, but is in line with the substance restrictions and corresponding exemptions.
Should you need any further information or have specific questions (eg. related to phased-out products), our Customer Care Centers will support you.
Please Note: You can find more information about Schneider Electric’s environmental commitment on the Green Premium webpage

Best Regards,

Vanessa MILER-FELS VP of Environment ****
Global Safety, Environment & Real Estate Senior Vice President Schneider Electric Industries SAS
Unless otherwise stated in the table, the data shown in this spreadsheet are related to the following production Date Code: 20/2023 (Week / Year)
The data shown in this spreadsheet are related to the following version of the RoHS directive: 2011/65/EU

Technical Specification

Commercial ref. Brand	Range Product Description	Compliance status

GV3P32

Schneider Electric

| TeSys Deca GV3P MOTOR CB THERM/MAG 23-32A EVERLINK| RoHS (10 substances): Compliant with exemptions 6(a), 6(c)

Schneider Electric Industries SAS Postal address / Adresse postale : Le Hive
35 rue Joseph Monier – CS 30323 F-92506 Rueil Malmaison Cedex Phone: +33 (0)4 76 57 60 60 http://www.schneider-electric.com

Legal information

par actions simplifie au capital de 896,313,776 euros 954 503 439 rcs Nanterre – code APE : 2712Z
Siret : 954 503 439 01719
n°ident. TVA : FR 04 954 503 439
Social ! 35, rue Joseph Monier
F – 92500 Rueil-Malmaison
export_RoHS_20230517_15543954a7e2c080-008a-4ac8-ae42-a677cc2fbbed.pdf – Wednesday, May 17, 2023

Documents / Resources

| Schneider Electric GV3P32 TeSys Deca Manual Starter and Protector [pdf] Installation Guide
GV3P32 TeSys Deca Manual Starter and Protector, GV3P32, TeSys Deca Manual Starter and Protector, Deca Manual Starter and Protector, Starter and Protector, Protector
---|---