BRESSER 9610009 10×25 Fernglas Binoculars Instruction Manual
- June 4, 2024
- BRESSER
Table of Contents
FERNGLAS
BINOCULARS
Operating Instructions
General Warning
Risk of blindness
Never use this device to look directly at the sun or in the direct proximity
of the sun. This will result in a risk of blindness.
- Do not place the device, particularly the lenses, in direct sunlight. The concentration of light could cause a fire.
- Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
- Do not expose the device to high temperatures.
Privacy PROTECTION!
The binoculars are intended only for private use. Please heed the privacy of
other people. Do not use them to look into apartments, for example.
List of Parts
1 Centre axle
2 a Twist-up eyecups
or
2 b Rubber eyecups
3 Dioptre adjustment
4 Body of the binoculars
5 Lens tube
6 Central focussing wheel
7 Eyepiece
8 Objective lens
9 Threaded tripod connection
10 Image circle with correctly set eye distance
Eyepieces for spectacle wearers
Depending on the model, your binoculars are equipped with either twist-up
eyecups (2a) or rubber eyecups (2b). Since there is a larger distance between
the binocular eyepiece and the pupil for those wearing glasses, both eyecup
varieties can be adjusted individually.
Twist-up Eyecups (2a)
Screw in the twist-up eyecups (2a) to use the binoculars while wearing
glasses. If you are not wearing glasses, unscrew the eyecups to achieve the
required distance from your pupils.
OR
Rubber Eyecups (2b)
To use the binoculars while wearing glasses, turn the rubber eyecups (2b)
toward the sides and down. If you are not wearing glasses, leave the eyecups
in the upright position to achieve the required distance from your pupils.
Adjusting the eyepiece distance
The distance between your eyes differs between individuals. To achieve perfect
interaction between your eyes and the eyepieces of your binoculars, set the
angle at the centre of the binoculars (1) so that you see a circular image
(10). Note this setting for later use.
Adjusting the focus
Look through your binoculars with your right eye closed. Now adjust the image
for your left eye by turning the centre wheel (6) until it is sharp and clear.
Close your left eye and adjust the image for your right eye by turning the
dioptre ring (3) until it is also sharp and clear.
Mounting the binoculars on a tripod
Your binoculars have a threaded tripod connection (9) built in.
The required tripod adapter is available in stores as an optional accessory
(Art. No. 19-16000 or 19-16500). With this accessory, you are able to mount
your binoculars on a tripod with a DIN mounting thread (e.g. Art. No.
49-22100).
! NOTES on cleaning
- Clean the eyepieces and lenses only with a soft, lint-free cloth, like a microfibre cloth. Do not apply excess pressure to the cloth to avoid scratching the lenses.
- To remove more stubborn dirt, moisten the cleaning cloth with an eyeglass-cleaning solution and wipe the lenses gently.
- Protect the device from dust and moisture. After use, particularly in high humidity, let the device acclimatize for a short period of time, so that the residual moisture can dissipate before storing. Remove the dust cover and store it in the included bag during use.
DISPOSAL
- Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
- Please take the current legal regulations into account when disposing of your device. You can get more information on the proper disposal from your local waste-disposal service or environmental authority.
Warranty and warranty term extension
The warranty term is two years from the date of purchase. Please keep your
proof of purchase. Register at
www.bresser.de/warranty and fill out a
brief questionnaire to get your warranty term extended to five years.
Registration must be completed within three months of purchase (date of
receipt) to validate the warranty. If you register thereafter, the warranty
term will not be extended. If you have problems with your device, please
contact our customer service first. Do not send any products without
consulting us first by telephone. Many problems with your device can be solved
over the phone.
If the problem cannot be resolved by phone, we will take care of transporting your device to be repaired. If the problem occurred after the warranty ended or it is not covered by our warranty terms, you will receive an estimate of repair costs, free of charge.
Service Hotline: +49 (0) 2872 – 80 74-210
Important for any returns:
Please make sure to return the device carefully packed in the original
packaging in order to prevent damage during transport. Also, please enclose
your receipt for the device (or a copy) and a description of the defect. This
warranty does not imply any restriction of your statutory rights.
Your dealer: ……………………. Art. No : …………………………
Description of problem: ……………………………
………………………………………………………………….
………………………………………………………………….
Name: ………………………….. Telephone: ………………………
Street: ………………………… Date of purchase:…………………
City/Postcode:…………………… Signature: ………………………
FERNGLAS
BINOCULARS
Experience the National Geographic Channel.
Visit our website:
www.nationalgeographic.com
© 2012 National Geographic Society
NATIONAL GEOGRAPHIC and Yellow Border Design are trademarks of the National
Geographic Society.
All rights reserved.
National Geographic’s net proceeds support vital exploration, conservation, research, and education programs.
Meade Instruments Europe
GmbH & Co. KG
Gutenbergstr. 2 • DE-46414 Rhede
www.bresser.de • info@bresser.de
ANLCFGMSP0113NG
Errors and technical changes reserved.
References
- Bresser | Startseite | Expand Your Horizon mit BRESSER
- Bresser | Wir erweitern unsere Garantie, Sie Ihren Horizont! | Expand Your Horizon
- National Geographic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>