DEWALT DCW682 20V MAX Biscuit Joiner User Guide

: June 16, 2024
: Dewalt

Table of Contents

DEWALT DCW682 20V MAX Biscuit Joiner
Product Information
- Specifications
Product Usage Instructions
Frequently Asked Questions (FAQ)
Introduction
Press contacts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DEWALT DCW682 20V MAX Biscuit Joiner

DEWALT-DCW682-20V-MAX-Biscuit-Joiner-PRODUCT

Product Information

Specifications

Maximum initial battery voltage: 20 volts (measured without a workload)
Nominal voltage: 18 volts

Product Usage Instructions

To effectively use the Stanley Black and Decker Press Center, please follow these steps:

Step 1: Downloading the Product Guide

To access detailed information about the product, download the product guide by following the link below: Download Product Guide

Step 2: Battery Installation

The Stanley Black and Decker Press Center requires a compatible battery for operation. Follow the steps below to install the battery:

Ensure the Press Center is powered off.
Locate the battery compartment on the Press Center.
Slide the battery into the compartment, aligning the contacts properly.
Push the battery until it clicks into place.

Step 3: Using the Biscuit Joiner

The Stanley Black and Decker Press Center is equipped with a biscuit joiner feature. Follow these instructions to use it:

Make sure the Press Center is powered on and the battery is properly installed.
Prepare the workpiece by marking the locations where you want to create biscuit slots.
Align the Press Center’s guide fence with the marked locations on the workpiece.
Hold the Press Center firmly and press the trigger to activate the biscuit joiner.
Gently move the Press Center along the marked locations to create the biscuit slots.

Frequently Asked Questions (FAQ)

Q: Where can I find additional assets and information about the Stanley Black and Decker Press Center?
- A: You can find additional assets and information online at https://newsroom.stanleyblackanddecker.com/DEWALT-R-Announces-20V-MAX-Biscuit-Joiner
Q: Can I use any battery with the Press Center?
- A: No, the Press Center requires a compatible battery. Please refer to the product guide for the recommended battery model.
Q: Are batteries and biscuits included with the Press Center?
- A: No, batteries and biscuits are sold separately. Refer to the product guide for compatible battery and biscuit options.

Introduction

Stanley Black and Decker Press Center

Download images and the product guide with more information below. Take on a wide range of drilling jobs with the incredible versatility offered by the XTREME™ 12V MAX Brushless Cordless 5-in-1 Drill/Driver (DCD703). Designed to improve access in hard-to-reach spaces, this Multi-Head Drill/Driver Kit features 4 dedicated attachment solutions. Drill and fasten in confined spaces with ease using the 1/4 in. hex right angle attachment, while the 1/4 in. hex quick release offset accessory delivers high performance in challenging corner spots. Conveniently load 1/4 in. hex accessory bits using one hand with the 1/4 in. hex quick release add-on, then tackle precision applications like drilling small pilot holes with the 3/8 in. ratcheting chuck attachment. Keep your bits close at hand with the built-in 1/4 in. hex bit holder with internal magnet for short tool length. At less than 5 in. long, this compact tool offers pro-level usability with 2-speed transmission and 15 clutch settings for the control you need to complete a variety of projects. The XTREME™ 12V MAX Brushless Cordless 5-in-1 Drill/Driver will be available in October where DEWALT products are sold.

Subjects

Building industry

DEWALT is obsessed with how users work in the real world and is relentlessly pursuing total jobsite solutions. By incorporating its latest technology and industry innovations, DEWALT is leading the charge for the jobsite of the future. DEWALT products. GUARANTEED TOUGH®. For more information, visit www.dewalt.com or follow DEWALT on Facebook, Twitter, Instagram, and LinkedIn.