8Bitdo B0C4YRJHGB Arcade Stick For Xbox Instruction Manual

8Bitdo B0C4YRJHGB Arcade Stick For Xbox

Product Overview

1. audio switch
   • headphones on
   • Madoff
   • all off
2. mode switch
   • joystick mode
   • gamepad mode
3. view button
4. share button
5. menu button
6. joystick
7. joystick switch
   • Left joystick
   • D-Pad
   • Right joystick
8. star button
9. Xbox button
10. profile LED
11. power LED
12. microphone mute LED
13. status LED
14. profile button
15. 2.4G receiver
16. 3.5mm audio jack
    
    

• Press the Xbox button to turn on the Arcade Stick
• Hold the Xbox button for 6 seconds to turn off the Arcade Stick
• Hold the Xbox button for12 seconds to force the Arcade Stick off

Windows

• Required system: Windows 10 (1903) or above

Wireless connection

1. Connect the 2.46 receiver to the USB port of your Windows device
2. Turn the mode switch to gamepad mode
3. Press Xbox button to turn on the Arcade Stick, wait till the Arcade Stick is successfully recognized by the device, status LED stays solid

Wired connection

1. Turn the mode switch to gamepad mode
2. Connect the Arcade Stick to your Windows device via USB cable, wait till the Arcade Stick is successfully recognized by the device, status LED stays solid

Xbox

• Xbox Series, Xbox One consoles are supported, Xbox 360 console is not supported
• The latest firmware version of your Xbox console is required

Wireless connection

1. Connect the 2.46 receiver to the USB port of your Xbox device
2. Turn the mode switch to joystick mode
3. Press Xbox button to turn on the Arcade Stick, wait till the Arcade Stick is successfully recognized by the Xbox console, status LED stays solid

Wired connection

1. Turn the mode switch to joystick mode
2. Connect the Arcade Stick to your Xbox console via USB cable, wait till the Arcade Stick is successfully recognized by the Xbox console, status LED stays solid

Button Swap

1. Press and hold any of the two buttons you would like to swap, then press the star button to swap them
2. Press and hold any of the two buttons which have been swapped and press the star button to cancel it
   • The profile LED will blink continuously when the swapped buttons are pressed
   • The swapped buttons will not be saved after the Arcade Stick is turned off
   • Joystick, view/menu/share and Xbox buttons are not supported

Volume Control

• beeps when adjusted to maximum/middle value/minimum

1. Press and hold profile + up/down to turn up/down in-game volume
   

2. Press and hold profile + left/right to adjust the balance between voice and game volume
   

Battery

Status LED indicator|

→

| LED indicator
---|---|---
Low battery|

→

| Red LED blinks
Battery charging|

→

| Green LED blinks
Battery full charged|

→

| Green LED stays solid

• Build-in 1000mAh Li-on rechargeable battery with 30 hours of playtime (20 hours when connected with headphones) and with 4 hours charging time

Ultimate Software

• Press profile button to activate customised profiles. The profile LED will not light up when using the default setting
• It gives you elite control over every piece of your Arcade Stick: customize button mapping, adjust stick & trigger sensitivity, and vibration control. Please visit support.Bbitdo.com for the application

Support

• Please visit support. Bbitdo.com for further information & additional support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>