D-D The Aquarium P1 Dosing Pump User Guide
- June 16, 2024
- D-D The Aquarium
Table of Contents
D-D The Aquarium P1 Dosing Pump
Product Information
Specifications
- Product Name: P1+ Dosing Pump
- Supported Platforms: Android 4.4 and above, iOS 9.1 and above
- App Name: Kamoer Remote
- App Download: Available on the App Store (for Apple users) and Play Store (for Android users)
Product Usage Instruction
Installing the App
There are two options to install the app:
- Scan the QR code in the user manual and download the app corresponding to the icon below.
- For Apple users, go to the App Store. For Android users, go to the Play Store. Search for ‘Kamoer Remote’ and download the app.
Note : Make sure your device meets the minimum requirements(Android 4.4 and above or iOS 9.1 and above) to run the app.
Registering Your Cloud Account
Before using your dosing pump, you need to register an account and log in
on the Kamoer Remote app. Follow these steps:
- Select the registration method – either via email or mobile number.
- Follow the onscreen instructions to complete the registration process.
- Make sure to select the correct region during setup to avoid network connection failures.
Connecting the Dosing Pump to the Cloud
Once you have registered your cloud account, you can connect your dosing
pump to the cloud using the Kamoer Remote app. Follow these steps:
- Open the app and log in to your account.
- Follow the app’s instructions to connect the dosing pump to the cloud.
FAQ
- Q: What are the supported platforms for the P1+ DosingPump?
- A: The P1+ Dosing Pump supports Android 4.4 and above, as well as iOS 9.1 and above.
- Q: Where can I download the Kamoer Remote app?
- A: You can download the app from the App Store (for Apple users) or the Play Store (for Android users).
- Q: How do I register a cloud account?
- A: Open the Kamoer Remote app, select the registration method (email or mobile number), and follow the onscreen instructions to complete the registration process.
- Q: Why is selecting the correct region important during app setup?
- A: Selecting the correct region ensures proper network connection. Incorrect region selection can result in network connection failures.
INSTALLING THE APP
- Option 1: Scan the QR code and download the app corresponding to the icon below.
- Option 2: Apple users – enter the App Store, Android users – enter the Play Store, search for ‘Kamoer Remote’, find the app, and download.
Note: The Kamoer Remote App supports Android 4.4 and above and iOS 9.1 and above.
REGISTER YOUR CLOUD ACCOUNT
You will need to register an account and log in on the Kamoer Remote app before using your dosing pump. Please note it is important that the correct region is selected when setting up the app. Incorrect region selection can result in network connection failures.
- Choose to register via E-mail or mobile then follow the onscreen instructions to complete registration and login.
CONNECT THE DOSING PUMP TO THE CLOUD
- Make sure your mobile device is connected to your home network and that the Kamoer Remote app permissions are set correctly on your mobile device (app location services must be switched on).
- Please note this device does not support 5G Wi-Fi and cannot use a 5G Wi-Fi hotspot.
- Connect the power supply to the DC 12v socket on the back of the dosing pump and plug it into a mains power source.
- After the dosing pump is turned on for the first time, the red status indicator light will be illuminated. At this point, you will need to use the Kamoer Remote app to connect the dosing pump to the cloud through a wireless router.
- Open the Kamoer Remote app, and click the ‘+’ button in the upper right corner of the device to add the device.
- Under the D-D H2Ocean heading select your model of dosing pump.
- The app will automatically search for your pump using Bluetooth and show any available pumps, once displayed select your pump.
- Choose the WiFi network that you would like to connect the pump to and carefully enter the password for that network, once done select ‘Next’ and the connection process will automatically start.
- When complete the app will display that the connection is successful, tap
- ‘Start to use’ to finish the process.
From this stage, you can now access and control the pump and make any changes including renaming the device. For a detailed setup manual visit the product page on our website www.theaquariumsolution.com.
FOLLOW US FOR INSPIRATION!
fb.com/theaquariumsolution
the aquarium solution
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>