Q-TRAN 03 RGBW Lalo Encapsulated Owner’s Manual

Q-TRAN 03 RGBW Lalo Encapsulated

Product Specifications

1. Product Name: LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface
2. Encapsulation: Polyurethane
3. Indoor/Outdoor: Yes
4. Impact Resistance: IK10
5. Mounting: Surface
6. LED Strips: High quality
7. Light Output: Uniform and luminous

Product Usage Instructions

Installation

The LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface are designed for both indoor and outdoor installations. Follow the steps below to install the product:

1. Choose the desired mounting location and ensure it is suitable for surface installation.
2. Ensure the power supply is disconnected before starting the installation process.
3. Position the fixture on the surface and mark the locations for drilling holes.
4. Drill the holes according to the marked locations.
5. Securely attach the fixture to the surface using appropriate screws or mounting brackets.
6. Connect the wires to the input/output connectors as per your requirements (refer to the “Wire Input/Output” section for more details).
7. If necessary, attach the wire end caps to provide a neat finish (refer to the “Input End Cap” and “Output End Cap” sections for more details).
8. Once the installation is complete, connect the power supply and test the functionality of the fixture.

Wire Input/Output
The LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface offer various options for wire input/output configuration. Follow the guidelines below to select the appropriate configuration:

• For wire input, choose one of the following options: S1 (Single 1 – Input only), S2 (Single 2 – Input only), P1 (Pass Through 1 – Input/output), P2 (Pass Through 2 – Input/output). Consider bottom feed for continuous mounting.
• For wire output, choose one of the following options: Closed End (No feed), Bare Wire (Standard 24), Connector 6, Connector 24. Consider CLS or BW for typical selections. Request custom length by specifying the desired length next to BW (e.g., BW48).

Input/Output Connectors and Wire Type

The LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface are compatible with different input/output connectors and wire types.
The typical selection is BW (Bare Wire). The available options are as follows:

• Input Connector: Connector 6, Connector 24, Bare Wire (Standard 24)
• Output Connector: Connector 6, Connector 24, Bare Wire (Standard 24), Closed End (No feed)
• Wire Type: CL2 (Class 2), CL2P (Plenum Rated – only available with bare wire leads)

Input/Output End Caps
The LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface come with standard clear end caps. However, you can select CL (Continuous Run) for continuous installations. The end caps are available for both input and output ends.

Mounting
The LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface offer different mounting options to suit your needs:

• Stainless Steel Magnet
• Low Profile Magnet

Finish
The LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface come in two finish options:

• Satin
• Black

Frequently Asked Questions (FAQ)

Q: What is the warranty period for the LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface?
A: The product comes with a 5-year warranty.

Q: Can I make modifications to the product without voiding the warranty?
A: No, any field modifications will void the warranty.

Q: Are the product specifications subject to change?
A: Yes, the specifications are subject to change. Please refer to the latest revision of the user manual for the most up-to-date information.

Q: Are the LALO-ENCAPSULATED (03) RGBW Linear Fixtures – Surface compatible with Q-Tran power supplies?
A: Yes, the fixtures are compatible for use with Q-Tran power supplies.

Q: What is the impact resistance rating of the product?
A: The product has an impact resistance rating of IK10.

SPECIFICATION

• Encapsulated with polyurethane for indoor and outdoor locations (IK10)
• Perfect for surface mounted installations
• Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments
• Delivers superior uniform light output and luminosity

Sample Part Number: LL3RGBW-4.0HE-30-ENC-STD-TL-P1-BW-BW-BK-CL2-SST- ST-48″-E

PRODUCT – DIMENSIONS

DELIVERED LUMENS

[Calculated L70 = 40000 hrs] Tested with LL3RGBW-**-30-ENC-STD

DIODE VISIBILITY

WIRE INPUT/OUTPUT

CONFIGURATION OPTIONS

CONNECTOR/WIRE – IN/OUT

Connector/Wire In or Out not needed to specify product. Standard configuration is BW for Wire In and CLS for Wire out

END CAP – IN/OUT

WIRE COLOR

MOUNTING

SST
2 clips provided for 4′ or less; 4 clips provided for greater than 4′
To order separately use SST-01
Each clip comes with a #4 x 5/8″ Flat Head screw

MG
One MG provided per foot
To order separately use MG-01

MMA01
Sold separately, to order use
MMA-01 Each bracket comes with 2 #6 x 5/8″ Flat Head SS
Required when mounting to a non-magnetic surface

M4
One M4 provided per foot.
To order separately use MG-04

FINISH

EXACT/OPTIMAL FIXTURE LENGTH

EXAMPLES OF 12″ OPTIMIZED STATIC WHITE FIXTURES WITH DIFFUSED LENS

RGBW ENC LENGTHS BY INCH

Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

RGBW-HE ENC LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

COMPATIBLE POWER SUPPLIES

See power supplies cut sheets for more information. Data subject to change, all data has +/- 5% tolerance.

DIM TO LEVEL

|

INDOOR

|

OUTDOOR

---|---|---

RGBW, RGBW-HE

|

RGBW, RGBW-HE

0.1%

|

QTM-eLED+DMX QZ-DMX

|

Q-SET-QZ-DMX QOM-eLED+DMX QZ-DMX

1%

|

QTM-eLED+DALI-DT8

|

QOM-eLED+DALI-DT8

10%

|

Non-Dim Power Supply with RGBW App Dongle

|

DIMMING PROTOCOL

|

INDOOR

|

OUTDOOR

---|---|---

RGBW, RGBW-HE

|

RGBW, RGBW-HE

DMX

|

QTM-eLED+DMX QZ-DMX

|

Q-SET-QZ-DMX QOM-eLED+DMX QZ-DMX

DALI-2: DT8

|

QTM-eLED+DALI-DT8

|

QOM-eLED+DALI-DT8

SCENE App Dimmed

|

Non-Dim Power Supply with RGBW App Dongle

|

COMPATIBLE MOUNTING ACCESSORIES

COMPATIBLE WIRING ACCESSORIES

COMPATIBLE CONTROL ACCESSORIES

5 year warranty | Field modifications void warranty | Data subject to change, all data has +/- 5% tolerance | Compatible for use with Q-Tran power supplies | IK10 rated

© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

References

• Your Name as Your Email | Hover Realnames
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>