Q-TRAN VV2SW VEVE-OPTICS Linear Fixtures Corner & Surface Owner’s Manual

Q-TRAN VV2SW VEVE-OPTICS Linear Fixtures Corner & Surface

Specifications:

• Product Name: VEVETM-OPTICS (02) STATIC WHITE
• Fixture Type: Linear Fixtures – Corner & Surface
• Optical Lens Options: Two options are available
• Application: Flush corner installation, surface mounted installations, storage area of a clothes closet (with LEDs at 4.0 watts or less per foot per NEC regulations)

Product Usage Instructions

Product Information:

The VEVETM-OPTICS (02) STATIC WHITE is a linear fixture suitable for both corner and surface installations. It offers two optical lens options and is perfect for applications where the light needs to be flush in a corner. It is also ideal for surface-mounted installations. Additionally, it can be installed in the storage area of a clothes closet when specified with LEDs at 4.0 watts or less per foot per NEC regulations.

Dimensions:

Fixture length: Minimum 12 inches, Maximum 98.43 inches (excluding end caps). For lengths under 12 inches, please consult the factory.

Product Options:

Sample Part Number: VV2SW-5.0-30-DRY-STD-20-P1-BW-BW-BK-CL2-SST-BK-48-E

• Product: VV2SW (Refer to the last page for compatible power supplies)
• Watts/Ft: 5.0
• CCT: 3000K
• Rated: DRY (IP20)
• Efficiency: STD (Standard)
• Lens: 20 (Refer to Diode Visibility section for LED representation and Photometric Performance section for beam angles)
• Wire Input/Connector/Wire In BW (Bare Wire) – Standard length is 24 inches, maximum length is 120 inches. Custom length can be requested.
• Wire Output/Connector/Wire Out: CLS (Closed End) or BW (Bare Wire). For wet applications, only black color is available.
• Wire Color: WH (White)
• Wire Type: CL2 (Class 2)
• Mounting: SST (Stainless Steel Magnet)
• Finish: BK (Black)
• Length (In): 48 (Exact Specified Length)

Warranty:
The product comes with a 5-year warranty. Please note that the warranty is only valid with Q-Tran power supplies. Any field modifications will void the warranty. All data provided is subject to change with a tolerance of +/- 5%.

Frequently Asked Questions:

• Q: What are the available wattage options?
  A: The available wattage options are 1.5W/ft, 3.0W/ft, 4.0W/ft, and 5.0W/ft. There are also higher efficiency options available: 1.5W/ft HE, 3.0W/ft HE, and 6.0W/ft HE.

• Q: Are there different color temperature options?
  A: Yes, the color temperature options range from 2000K to 4000K. The available options are 20 (2000K), 22 (2200K), 24 (2400K), 27 (2700K), 30 (3000K), 35 (3500K), and 40 (4000K).

• Q: What is the IP rating for the fixture?
  A: The fixture has a dry IP20 rating and a wet IP67 rating.

• Q: What is the maximum length for the wire connectors?
  A: The standard length for the wire connectors is 24 inches, but the maximum length is 120 inches. Custom lengths can be requested.

• Q: Can the fixture be used in wet applications?
  A: Yes, the fixture has an IP67 rating, which makes it suitable for wet applications. However, for wet applications, only black wire connectors are available.

Linear Fixtures – Corner & Surface

• Offers two optical lens options
• Perfect for applications when the light needs to be flush in a corner
• Ideal for surface-mounted installations
• Suitable for installation in the storage area of a clothes closet when specified with LEDs at 4.0 watts or less per foot per NEC regulations

PRODUCT FEATURES

Sample Part Number: VV2SW-5.0-30-DRY-STD-20-P1-BW-BW-BK-CL2-SST-BK-48″-E

PRODUCT DIMENSIONS

DELIVERED LUMENS

DIODE VISIBILITY

PHOTOMETRIC PERFORMANCE

Nominal beam spread shown, beam spread varies based on the light engine. For more detailed information, see photometric data.

WIRE INPUT/OUTPUT

CONFIGURATION OPTIONS

CONNECTOR/WIRE – IN/OUT

Connector/Wire In or Out not needed to specify product. Standard configuration is BW for Wire In and CLS for Wire out

WIRE COLOR

MOUNTING

FINISH

EXACT/OPTIMAL FIXTURE LENGTH

EXAMPLES OF 12″ OPTIMIZED STATIC WHITE FIXTURES WITH DIFFUSED LENS

SW DRY, DMP LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

SW WET LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

SW-HE, SW-HE+ DRY, DMP LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

COMPATIBLE POWER SUPPLIES

DIM TO LEVEL

|

INDOOR

|

OUTDOOR

---|---|---

SW24/1.5-4.0

|

SW24/5.0, SW-HE, SW-HE+

|

SW24/1.5-4.0

|

SW24/5.0, SW-HE, SW-HE+

Dim to Black

|

Q6M-DC+CAP QTM-DC+CAP iQ-PH

iQ-PH+QD1

|

Q6M-DC+CAP QTM-DC+CAP iQ-PH

iQ-PH+QD1

|

QOM-DC+CAP QOM-PH

iQ-PH

|

QOM-DC+CAP QOM-PH

iQ-PH

0.1%

|

QTM-eLED+0-10V QTM-eLED+AN QZ-DMX

QZ-PH/0-10V QZ-STICK-PH/0-10V

QZLP

|

QTM-eLED+0-10V QTM-eLED+AN QZ-DMX

QZ-PH/0-10V QZ-STICK-PH/0-10V

QZLP

|

Q-SET-QZ-DMX

Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-DMX

QZ-PH/0-10V

|

Q-SET-QZ-DMX

Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-DMX

QZ-PH/0-10V

1%

|

QTM-eLED(E) QTM-eLED(L)

QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN

|

QTM-eLED(E) QTM-eLED(L)

QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN

|

QOM-eLED+DALI-DT6

|

QOM-eLED+DALI-DT6

10%

|

Non-Dim Power Supply with SW App Dongle

|

Non-Dim Power Supply with SW App Dongle

|

Q-HEX-mini-DC Q-SET-mLED

|

DIMMING PROTOCOL

|

INDOOR

|

OUTDOOR

---|---|---

SW24/1.5-4.0

|

SW24/5.0, SW-HE, SW-HE+

|

SW24/1.5-4.0

|

SW24/5.0, SW-HE, SW-HE+

Non-Dim

|

QTM-eLED-ND QZ-ND

|

QTM-eLED-ND QZ-ND

|

Q-SET-QZ-ND Q-SET-eLED-ND QOM-eLED-ND

QZ-ND iQ-ND-50-65

|

Q-SET-QZ-ND Q-SET-eLED-ND QOM-eLED-ND

QZ-ND iQ-ND-50-65

Phase

|

Q6M-DC+CAP QTM-DC+CAP QTM-eLED(E) QTM-eLED(L) QZ-PH/0-10V

QZ-STICK-PH/0-10V QZLP

iQ-PH

iQ-PH+QD1

|

Q6M-DC+CAP QTM-DC+CAP QTM-eLED(E) QTM-eLED(L) QZ-PH/0-10V

QZ-STICK-PH/0-10V QZLP

iQ-PH

iQ-PH+QD1

|

Q-HEX-mini-DC

Q-SET-QZ-PH/0-10V Q-SET-mLED QOM-DC+CAP

QOM-PH QZ-PH/0-10V

iQ-PH

|

Q-SET-QZ-PH/0-10V QOM-DC+CAP QOM-PH

QZ-PH/0-10V iQ-PH

0-10V

|

QTM-eLED+0-10V QTM-eLED+AN QZ-PH/0-10V

QZ-STICK-PH/0-10V QZLP

|

QTM-eLED+0-10V QTM-eLED+AN QZ-PH/0-10V

QZ-STICK-PH/0-10V QZLP

|

Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-PH/0-10V

|

Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-PH/0-10V

Lutron Athena

|

QTM-eLED+AN QTM-eLED+DALI-DT6-AN

|

QTM-eLED+AN QTM-eLED+DALI-DT6-AN

|  |

ECO System

|

QTM-eLED(E)

|

QTM-eLED(E)

|  |

DMX

|

QZ-DMX

|

QZ-DMX

|

Q-SET-QZ-DMX QZ-DMX

|

Q-SET-QZ-DMX QZ-DMX

DALI-2: DT6

|

QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN

|

QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN

|

QOM-eLED+DALI-DT6

|

QOM-eLED+DALI-DT6

SCENE App Dimmed

|

Non-Dim Power Supply with SW App Dongle

|

Non-Dim Power Supply with SW App Dongle

|  |

See power supplies cut sheets for more information. Data subject to change, all data has +/- 5% tolerance.

COMPATIBLE MOUNTING ACCESSORIES

COMPATIBLE WIRING ACCESSORIES

COMPATIBLE CONTROL ACCESSORIES

© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change. Rev-07-20-23

References

• Your Name as Your Email | Hover Realnames
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>