Q-TRAN LL2RGB LALO-OPTICS Linear Fixtures Surface Owner’s Manual

June 16, 2024
Q-TRAN

Q-TRAN LL2RGB LALO-OPTICS Linear Fixtures Surface

Q-TRAN-LL2RGB-LALO-OPTICS-Linear-Fixtures-Surface-
product

Product Information

Specifications

  • Product: LALO-OPTICS (02) RGB
  • Linear Fixtures: Surface
  • Watts/Ft: 6.0
  • CCT: RGB
  • Rated: DRY IP20, DMP IP54, WET IP67
  • Efficiency: STD (Standard)
  • Lens: 17DEG (17-degree beam spread)
  • Wire Input/Output: Various options (see below)
  • Wire Color: White, Black
  • Mounting: Stainless Steel Magnet, Low Profile Magnet
  • Finish: Satin Black
  • Length (in): Exact or Optimal (specified length)

Product Usage Instructions

Dimensions

The product is a linear fixture designed for surface mounting. Please refer to the product manual for detailed dimensions.

Delivered Lumens

The delivered lumens may vary depending on the specific light engine used. For more detailed information, please refer to the photometric data provided.

Diode Visibility

The product features an optical lens that helps to improve the visibility of the diodes. This ensures optimal illumination.

Wire Input/Output

The product offers various wire input/output configurations:

  • S1: Single 1 (Input only) – End Feed
  • S2: Single 2 (Input only) – Bottom Feed
  • P1: Pass Through 1 (Input/output) – End Feed
  • P2: Pass Through 2 (Input/output) – Bottom Feed

For continuous mounting, it is recommended to use the bottom feed configuration.

Wire Color

The product is available in two wire color options: White and Black.

Mounting

The product can be mounted using either Stainless Steel Magnets or Low Profile Magnets. Please refer to the product manual for detailed mounting instructions.

Finish

The product is available in a Satin Black finish.

Length

The product is available in both exact and optimal lengths. The exact length refers to a specified length, while the optimal length ensures optimal illumination.

FAQ (Frequently Asked Questions)

  • Are power supplies included with the product?
    No, power supplies are not included with the product. Compatible power supplies can be found on the last page of the manual.

  • Can I request a custom wire length?
    Yes, for the Bare Wire (BW) configuration, you can request a custom length by writing in the desired length next to BW in the part number.

  • What is the warranty period for the product?
    The product comes with a 5-year warranty. However, please note that field modifications will void the warranty.

  • Can the product be used in wet environments?
    Yes, the product is rated for Wet IP67 environments.

Linear Fixtures – Surface

  • Offers an optical lens option
  • Ideal for lighting direct and indirect surface mount applications
  • Ideal for surface mounted or recessed installations that call for low-profile light in small areas

PRODUCT FEATURES

Sample Part Number : LL2RGB-6.0-RGB-DRY-STD-17-P1-BW-BW-BK-CL2-SST- BK-48″-EQ-TRAN-LL2RGB-LALO-OPTICS-Linear-Fixtures-Surface-fig-
\(2\) Q-TRAN-LL2RGB-LALO-OPTICS-Linear-
Fixtures-Surface-fig- \(3\) Q-TRAN-LL2RGB-
LALO-OPTICS-Linear-Fixtures-Surface-fig- \(4\)

PRODUCT DIMENSIONS

Q-TRAN-LL2RGB-LALO-OPTICS-Linear-Fixtures-Surface-
fig- \(5\)

DELIVERED LUMENS

Q-TRAN-LL2RGB-LALO-OPTICS-Linear-Fixtures-Surface-fig-
\(6\)

DIODE VISIBILITY

PHOTOMETRIC PERFORMANCE

Nominal beam spread shown, beam spread varies based on light engine. For more detailed information, see photometric data

WIRE INPUT/OUTPUT

CONFIGURATION OPTIONS

Q-TRAN-LL2RGB-LALO-OPTICS-Linear-Fixtures-Surface-
fig- \(11\)

CONNECTOR/WIRE – IN/OUT
Connector/Wire In or Out not needed to specify product. Standard configuration is BW for Wire In and CLS for Wire out

WIRE COLOR

MOUNTING

Q-TRAN-LL2RGB-LALO-OPTICS-Linear-Fixtures-Surface-fig-
\(14\)

FINISH

EXACT/OPTIMAL FIXTURE LENGTH

EXAMPLES OF 12″ OPTIMIZED STATIC WHITE FIXTURES WITH DIFFUSED LENSQ-TRAN-
LL2RGB-LALO-OPTICS-Linear-Fixtures-Surface-fig- \(16\)

RGB DRY, DMP LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.Q-TRAN-LL2RGB-LALO-OPTICS-Linear-
Fixtures-Surface-fig- \(17\)

RGB WET LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.Q-TRAN-LL2RGB-LALO-OPTICS-Linear-
Fixtures-Surface-fig- \(18\)

COMPATIBLE POWER SUPPLIES

See power supplies cut sheets for more information. Data subject to change, all data has +/- 5% tolerance.Q-TRAN-LL2RGB-LALO-OPTICS-Linear-Fixtures-
Surface-fig- \(19\)

COMPATIBLE MOUNTING ACCESSORIES

Q-TRAN-LL2RGB-LALO-OPTICS-Linear-
Fixtures-Surface-fig- \(20\)

COMPATIBLE WIRING ACCESSORIES

COMPATIBLE CONTROL ACCESSORIES

© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change. Rev-07-20-23

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals