Q-TRAN TALO-ENCAPSULATED (03) STATIC WHITE Linear Fixtures Surface Instructions

Q-TRAN TALO-ENCAPSULATED (03) STATIC WHITE Linear Fixtures Surface

Product Information

Specifications

• Product: TALO-ENCAPSULATED (03) STATIC WHITE
• Linear Fixtures – Surface
• Encapsulated with polyurethane for indoor and outdoor locations (IK10)
• Perfect for ceiling mounted installations
• Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments
• Delivers superior uniform light output and luminosity
• Rated Enclosure: IP67
• Efficiency: STD Standard

Product Usage Instructions

Step 1: Selecting the Wattage and Color Temperature (CCT)
The product is available in different wattages per foot and color temperatures (CCT). Refer to the table below for the available options:

Step 2: Selecting Wire Input/Output and Connectors
Choose the appropriate wire input/output configuration and connector type for your installation:

• Wire Input:
  • S1: Single 1 (Input only) – End Feed
  • S2: Single 2 (Input only) – Bottom Feed
  • P1: Pass Through 1 (Input/output) – End Feed
  • P2: Pass Through 2 (Input/output) – Bottom Feed
• Connector/Wire In:
  • BW: Bare Wire (Standard 24)
  • BRL: Barrel Connector 6
  • CON6: Connector 6
  • CON24: Connector 24

Note : Typical selection is BW. Standard length is 24, but you can request a custom length by writing in the desired part number next to BW (example: BW48).

• Connector/Wire Out:
  • CLS: Closed End (No feed)
  • BW: Bare Wire (Standard 24)
  • BRL: Barrel Connector 6
  • CON6: Connector 6
  • CON24: Connector 24

Note : Typical selection is CLS or BW. Standard length is 24, but you can request a custom length by writing in the desired part number next to BW (example: BW48).

Step 3: Selecting Input and Output End Caps
Select the appropriate end cap for the input and output sides of the fixture:

• Input End Cap: STD Standard (End cap matches fixture finish chosen)
• Output End Cap: STD Standard (End cap matches fixture finish chosen)

Step 4: Selecting Wire Color and Type
Choose the wire color and type for your installation:

• Wire Color:
  • WH: White
  • BK: Black
  • N/A: For Barrel
• Wire Type:
  • CL2: Class 2
  • CL2P: Plenum Rated
  • N/A: For Barrel (CL2P only available with bare wire leads (BW))

Step 5: Selecting Mounting and Finish
Choose the mounting option and finish for your installation:

• Mounting:
  • HSS: Hidden Stainless Steel Clip
  • Plastic T-Bar Clip
• Finish:
  • ST: Satin
  • BK: Black

Step 6: Determining Length
Determine the exact or optimal length (in inches) for your installation.

Note : Field modifications void warranty. Compatible for use with Q-Tran power supplies. Florida Fish and Wildlife Conservation Commission (FWC) rated Strips: Red and Amber. 5 year warranty. Data subject to change, all data has +/- 5% tolerance. Specification subject to change.

FAQ (Frequently Asked Questions)

• Q: What is the IP rating of the enclosure?
  A: The enclosure is IP67 rated, making it suitable for indoor and outdoor locations.

• Q: What is the warranty period for the product?
  A: The product comes with a 5-year warranty.

• Q: Can I request a custom wire length?
  A: Yes, you can request a custom wire length by writing in the desired part number next to BW (example: BW48).

TALO-ENCAPSULATED (03) STATIC WHITE Linear Fixtures – Surface

• Encapsulated with polyurethane for indoor and outdoor locations (IK10)
• Perfect for ceiling mounted installations
• Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments
• Delivers superior uniform light output and luminosity

Sample Part Number: TO3SW-5.0-30-ENC-STD-TL-P1-BW-BW-BK-CL2-HSS-ST-48″-E

PRODUCT – DIMENSIONS

DELIVERED LUMENS
[Calculated L70 = 40000 hrs] Tested with TO3SW-**-30-ENC-STD

DIODE VISIBILITY

TEMPERATURE RATINGS

WIRE INPUT/OUTPUT

SINGLE (Input only)

PASS THROUGH (Input/Output) CONFIGURATION OPTIONS

8 / 9 CONNECTOR/WIRE – IN/OUT
Connector/Wire In or Out not needed to specify product. Standard configuration is BW for Wire In and CLS for Wire out

WIRE COLOR MOUNTING

• 2 clips provided for 4′ or less. 4 clips provided for greater than 4′.
• To order separately use SST-02
• Each clip comes with a #4 x 5/8 Flat Head SS
• Standard 1”(15/16) grid clips 2 clips provided per first 12”, 1 clip provided per additional foot
• To order separately use
• PLC-01
• Each clip comes with a #4 x 5/8 Flat Head SS

FINISH

EXACT/OPTIMAL FIXTURE LENGTH

EXAMPLES OF 12″ OPTIMIZED STATIC WHITE FIXTURES WITH DIFFUSED LENS

SW ENC LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

SW-HE ENC LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

COMPATIBLE POWER SUPPLIES
See power supplies cut sheets for more information. Data subject to change, all data has +/- 5% tolerance.

SW24/5.0, SW-HE, SW-HE+
Dim to Black| Q6M-DC+CAP QTM-DC+CAP iQ-PH

iQ-PH+QD1

| Q6M-DC+CAP QTM-DC+CAP iQ-PH

iQ-PH+QD1

| QOM-DC+CAP QOM-PH

iQ-PH

| QOM-DC+CAP QOM-PH

iQ-PH

0.1%| QTM-eLED+0-10V QTM-eLED+AN QZ-DMX

QZ-PH/0-10V QZ-STICK-PH/0-10V

QZLP

| QTM-eLED+0-10V QTM-eLED+AN QZ-DMX

QZ-PH/0-10V QZ-STICK-PH/0-10V

QZLP

| Q-SET-QZ-DMX

Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-DMX

QZ-PH/0-10V

| Q-SET-QZ-DMX

Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-DMX

QZ-PH/0-10V

1%| QTM-eLED(E) QTM-eLED(L)

QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN

| QTM-eLED(E) QTM-eLED(L)

QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN

| QOM-eLED+DALI-DT6| QOM-eLED+DALI-DT6
10%| Non-Dim Power Supply with SW App Dongle| Non-Dim Power Supply with SW App Dongle| Q-HEX-mini-DC Q-SET-mLED|

DIMMING PROTOCOL

| INDOOR| OUTDOOR
---|---|---
SW24/1.5-4.0| SW24/5.0, SW-HE, SW-HE+| SW24/1.5-4.0| SW24/5.0, SW-HE, SW-HE+
Non-Dim| QTM-eLED-ND QZ-ND| QTM-eLED-ND QZ-ND| Q-SET-QZ-ND Q-SET-eLED-ND QOM-eLED-ND

QZ-ND iQ-ND-50-65

| Q-SET-QZ-ND Q-SET-eLED-ND QOM-eLED-ND

QZ-ND iQ-ND-50-65

Phase| Q6M-DC+CAP QTM-DC+CAP QTM-eLED(E) QTM-eLED(L) QZ-PH/0-10V

QZ-STICK-PH/0-10V QZLP

iQ-PH

iQ-PH+QD1

| Q6M-DC+CAP QTM-DC+CAP QTM-eLED(E) QTM-eLED(L) QZ-PH/0-10V

QZ-STICK-PH/0-10V QZLP

iQ-PH

iQ-PH+QD1

| Q-HEX-mini-DC

Q-SET-QZ-PH/0-10V Q-SET-mLED QOM-DC+CAP

QOM-PH QZ-PH/0-10V

iQ-PH

| Q-SET-QZ-PH/0-10V QOM-DC+CAP QOM-PH

QZ-PH/0-10V iQ-PH

0-10V| QTM-eLED+0-10V QTM-eLED+AN QZ-PH/0-10V

QZ-STICK-PH/0-10V QZLP

| QTM-eLED+0-10V QTM-eLED+AN QZ-PH/0-10V

QZ-STICK-PH/0-10V QZLP

| Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-PH/0-10V| Q-SET-QZ- PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-PH/0-10V
Lutron Athena| QTM-eLED+AN QTM-eLED+DALI-DT6-AN| QTM-eLED+AN QTM-eLED +DALI-DT6-AN|  |
ECO System| QTM-eLED(E)| QTM-eLED(E)|  |
DMX| QZ-DMX| QZ-DMX| Q-SET-QZ-DMX QZ-DMX| Q-SET-QZ-DMX QZ-DMX
DALI-2: DT6| QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN| QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN| QOM-eLED+DALI-DT6| QOM-eLED+DALI-DT6
SCENE App Dimmed| Non-Dim Power Supply with SW App Dongle| Non-Dim Power Supply with SW App Dongle|  |

COMPATIBLE MOUNTING ACCESSORIES

COMPATIBLE WIRING ACCESSORIES

COMPATIBLE CONTROL ACCESSORIES © 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change. Rev-07-20-23

References

• Your Name as Your Email | Hover Realnames
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>