Q-TRAN TQ3SC Linear Fixtures Surface Datasheet
- June 16, 2024
- Q-TRAN
Table of Contents
- TORQ-ENCAPSULATED
- PRODUCT – DIMENSIONS
- DELIVERED LUMENS
- DIODE VISIBILITY
- ENC/CL – Clear encapsulation
- WIRE INPUT/OUTPUT
- CONFIGURATION OPTIONS
- CONNECTOR/WIRE – IN/OUT
- END CAP – IN/OUT
- WIRE COLOR
- MOUNTING
- FINISH
- EXACT/OPTIMAL FIXTURE LENGTH
- SC ENC LENGTHS BY INCH
- COMPATIBLE POWER SUPPLIES See power supplies cut sheets for more
- COMPATIBLE MOUNTING ACCESSORIES
- COMPATIBLE WIRING ACCESSORIES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**Q-TRAN TQ3SC Linear Fixtures Surface Datasheet
**
TORQ-ENCAPSULATED
- Encapsulated with polyurethane for indoor and outdoor locations (IK10)
- Perfect for surface mounted installations
- Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments
- Delivers superior uniform light output and luminosity
- Q-Tran Red & Amber LED products are Florida Fish and Wildlife Conservation Commission certified, making them safe for turtles and other wildlife
PRODUCT| WATTS/ FT| CCT| RATED| EFFICIENCY| LENS| WIRE INPUT/ OUTPUT|
CONNECTOR/ WIRE IN| CONNECTOR/ WIRE IN| INPUT END CAP| INPUT END CAP| WIRE
COLO| 13 WIRE TYPE| MOUNTING| FINISH| LENGTH (IN| EXACT/ OPTIMA
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
TQ3SC| 5.0| | ENC| | | | | | | | | | | | |
Sample Part Number: TQ3SC-5.0-G-ENC-WO-TL-P1-BW-BW-BK-CL2-SST-ST-48″-E
PRODUCT
TQ3SC
See last page for compatible power supplies.
WATTS/FT
5.0 5.0W/ft
CCT
A Amber
B Blue
G Green
R Red
RATED
ENC IP67
EFFICIENCY
STD Standard
WO White Optics
WhiteOptics – Internal coating, greater lumen output
LENS
CL Clear
TL Translucent
For representation of LED visibility, see Diode Visibility section on
following pages.
For beam angles, see Photometric Performance section on following pages
WIRE INPUT/OUTPUT
S1 Single 1 (Input only) – End Feed
S2 Single 2 (Input only) – Bottom Feed
S3 Single 3 (Input only) – Left Side Feed
S4 Single 4 (Input only) – Right Side Feed
For continuous mounting, consider bottom or side feed
P1 Pass Through 1 (Input/output) – End Feed
P2 Pass Through 2 (Input/output) – Bottom Feed
P3 Pass Through 3 (Input/output) – Left Side Feed
P4 Pass Through 4 (Input/output) – Right Side Feed
For continuous mounting, consider bottom or side feed
CONNECTOR/WIRE IN
BW Bare Wire (Standard 24″)
BRL Barrel
CON6 Connector 6″
CON24 Connector 24″
Connector/Wire In not needed to specify product. Typical selection is BW.
BW: Standard length is 24″, Max length is 120″. Request custom length by
writing in part number next to BW (example: BW48)
BW Bare Wire (Standard 24″)
BRL Barrel
CON6 Connector 6″
CON24 Connector 24″
Connector/Wire In not needed to specify product. Typical selection is BW.
BW: Standard length is 24″, Max length is 120″. Request custom length by
writing in part number next to BW (example: BW48)
CONNECTOR/WIRE OUT
CLS Closed End (No feed)
BW Bare Wire (Standard 24″)
BRL Barrel
CON6 Connector 6″
CON24 Connector 24″
Connector/Wire Out not needed to specify product. Typical selection is CLS or
BW.
BW: Standard length is 24″, Max length is 120″. Request custom length by
writing in part number next to BW (example: BW48)
INPUT END CAP
STD Standard
CL Clear
STD – End cap matches fixture finish chosen
Select CL for continuous runs
OUTPUT END CAP
STD Standard
CL Clear
STD – End cap matches fixture finish chosen
Select CL for continuous runs
WIRE COLOR
WH White
BK Black
N/A For Barrel
WIRE TYPE
CL2 Class 2
CL2P Plenum Rated
N/A For Barrel
CL2P only available with bare wire leads (BW)
MOUNTING
SST Stainless Steel
MG Magnet
M4 Low Profile Magnet
FINISH
ST Satin
BK Black
BZ Bronze
LENGTH (IN)
Fixture length min 12”, max 98.43” not including end caps.
Tolerance +0 – 1/8”. Consult factory for lengths under 12″.
EXACT/OPTIMAL
O Optimal Illumination
E Exact Specified Length
Exact fixtures are the exact length specified +0 – 1/8”. Optimal fixtures’
length is rounded down with illumination end to end. See Exact/Optimal Fixture
Length charts.
PRODUCT – DIMENSIONS
-
Profile
-
Profile with stainless steel mounting clip
-
Profile with magnet mounting
-
Profile with low profile magnet
DELIVERED LUMENS
[Calculated L70 = 40000 hrs) Tested with TQ3SC-5.0-**-ENC-STD| Red| Green|
Blue| Amber
---|---|---|---|---
LM/FT| LM/FT| LM/FT| LM/FT
CL| 67| 360| 93| 60
TL| 55| 298| 77| 50
Calculated L70 = 40000 hrs] Tested with TQ3SC-5.0-**-ENC-WO
| Red| Green| Blue| Amber
---|---|---|---|---
LM/FT| LM/FT| LM/FT| LM/FT
CL| 78| 422| 110| 71
TL| 69| 372| 96| 62
DIODE VISIBILITY
ENC/CL – Clear encapsulation
ENC/TL – Translucent encapsulation
WIRE INPUT/OUTPUT
SINGLE (Input only)
-
End Feed
-
Bottom Feed
-
Side Feed-Left
-
Side Feed-Right
PASS THROUGH (Input/Output)
-
End Feed
-
Bottom Feed
-
Side Feed-Left
-
Side Feed-Right
CONFIGURATION OPTIONS
-
Single End Feed
-
Continuous Side Feed – Right
-
Continuous Side Feed – Right
-
Non-Continuous End Feed
-
Continuous End to End Feed
-
Continuous End to End Feed
-
Continuous Bottom Feed
-
Continuous Bottom Feed
-
Continuous Side Feed – Left
-
Continuous Side Feed – Left
CONNECTOR/WIRE – IN/OUT
-
Bare Wire 24″ 22 AWG
-
Barrel 6″-WET | 22 AWG
-
Wire Connector | 22 AWG IP67 Rated, UL Listed
END CAP – IN/OUT
-
End cap matches fixture finish chosen
-
Clear end cap
WIRE COLOR
MOUNTING
Stainless Steel Clip
2 clips provided for 4′ or less; 4 clips provided for greater than 4′
To order separately use SST-01
Each clip comes with a #4 x 5/8″ Flat Head screw
One MG provided per foot
To order separately use MG-01
Magnet Mount Accessory of MG-01
Sold separately, to order use
MMA-01
Each bracket comes with 2 #6 x 5/8″ Flat Head SS
Required when mounting to a non-magnetic surface
One M4 provided per foot.
To order separately use MG-04
FINISH
Satin
Black
Bronze
EXACT/OPTIMAL FIXTURE LENGTH
EXAMPLES OF 12″ OPTIMIZED STATIC WHITE FIXTURES WITH DIFFUSED LENS
-
S1 & S2
-
S3 & S4
-
P1 & P2
-
P3 & P4
SC ENC LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down withllumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.
EXACT LENGTH
Requested
Length| Potential dim
spot on either
end of fixture
---|---
12″| 1″
13″| 0.5′
14″| 1″
15″| 0.5′
16″| 1″
17″| 0.5′
18″| 1″
19″| 0.5″
20″| 1′
21″| 0.5′
22″| 1″
23″| 0.5′
24″| 1′
36″| 1″
48″| 1′
60″| 1″
72″| 1″
84″| 1″
96″| l’
OPTIMAL LENGTH: highlighted rows are closest to requested nominal length
Requested
Nominal
Length| End Feed| Beam Feed| __ End Feed| & P2
**S3 n u PV+ktkOiti. IN
Incaom Feed Side Feed-Len| & S4 so IQ IN Side
Feed – ROI| P3 P3 s. 141°I.”
Slde Feed • left| & P4 P4 r? u i.. NI
SW Feel • RIO
---|---|---|---|---|---|---|---
12′ **| 10 5′| 10.75′| 10.375′| 10.375′
13′ **| 12.5′| 12.75′| 12.375′| 12.375′
14′ **| 12.5′| 12.75′| 12.375′| 12.375′
15′ **| 14.5′| 14.75′| 14.375′| 14.375′
16′ **| 14.5′| 14.75′| 14.375′| 14.375′
17′ **| 16.5′| 16.75′| 16.375′| 16.375′
18′ **| 16.5′| 16.75′| 16.375′| 16.375′
19′ **| 18.5′| 18.75′| 18.375′| 18.375′
20′ **| 18.5′| 18.75′| 18.375′| 18.375′
21′ **| 20.5′| 20.75′| 20.375′| 20.375′
22′ **| 20.5′| 20.75′| 20.375′| 20.375′
23′ **| 22.5′| 22.75′| 22.375′| 22.375′
24′ **| 22.5′| 22/5′| 22275′| 22275′
36′| 34.5′| 34.75′| 34.375′| 34.375′
48′| 46.5′| 46.75′| 46.375′| 46.375′
60′| sar| stn.| 58.375′| 58.375′
72′| 70.5′| 70.75′| 70.375′| 70.375′
84′| 82.5′| 82.75′| 82.375′| 82.375′
96′| 94.5′| 94.75′| 94.375′| 94.375′
COMPATIBLE POWER SUPPLIES See power supplies cut sheets for more
information. Data subject to change, all data has +/- 5% tolerance.
DIM TO LEVEL | INDOOR | OUTDOOR |
---|---|---|
S | SC | |
Dim to Black | Q6M-DC+CAP QTM-DC+CAP iQ-PH iQ-PH+QD1 | QOM-DC+CAP QOM-PH |
0.1% | QTM-eLED+0-10V QTM-eLED+AN QZ-DMX QZ-PH/0-10V QZ-STICK-PH/0-10 | Q-SET- |
QZ-DMX Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-DMX QZ-PH/0-10V
1%| QTM-elder(E) QTM-elder(L) QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN| QOM-eLED
+DALI-DT6
10%| Non-Dim Power Supply with SW App Dongle|
DIMMING PROTOCOL
| INDOOR| OUTDOOR
---|---|---
SC| SC
Non-Dim| QTM-elder-ND QZ-ND| Q-SET-QZ-ND Q-SET-elder-ND QOM-elder-ND QZ-ND iQ-
ND-50-65
Phase| QTM-DC+CAP QTM-elder(E) QTM-elder(L) QZ-PH/0-10V QZ-STICK-PH/0-10V QZLP
iQ-PH iQ-PH+QD1| Q-SET-QZ-PH/0-10V QOM-DC+CAP QOM-PH QZ-PH/0-10V iQ-PH
0-10V| QTM-eLED+0-10V QTM-eLED+AN QZ-PH/0-10V QZ-STICK-PH/0| Q-SET-eLED+0-10V
QOM-eLED+0-10V QZ-PH/0-10V
Lutron Athena| QTM-eLED+AN QTM-eLED+DALI-DT6-AN|
ECO System| QTM-elder(E)|
DMX| QZ-DMX| Q-SET-QZ-DMX
DALI-2: DT6| QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN| QOM-eLED+DALI-DT6
SCENE App Dimmed| Non-Dim Power Supply with SW App Dongle|
COMPATIBLE MOUNTING ACCESSORIES
-
Adjustable mounting bracket – Medium
-
Adjustable mounting bracket – Large
-
Adjustable mounting bracket – Largo
-
Small mounting accessory
-
Adjustable mounting accessory
COMPATIBLE WIRING ACCESSORIES
-
UL Listed, miniature junction box
-
8ft barrel cable extender
-
Splits lead from one to four LED Barrel connector fixtures
-
10ft Con cable extender
-
Splits lead from one to four LED Con connectors
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>