AIRTHEREAL SAM130S Smart Plug In Fragrance Diffuser User Manual
- June 2, 2024
- AIRTHEREAL
Table of Contents
- AIRTHEREAL SAM130S Smart Plug In Fragrance Diffuser
- SAFETY INSTRUCTIONS
- SPECIFICATIONS
- COMPONENTS
- OPERATION
- ENABLING THE WI-Fl CONNECTION
- CONTROL
- CLEANING INSTRUCTIONS
- FCC RADIATION EXPOSURE STATEMENT
- LIMITED WARRANTY
- ATTRIBUTIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AIRTHEREAL SAM130S Smart Plug In Fragrance Diffuser
SMART PLUG-IN FRAGRANCE DIFFUSER
Please read this user manual in its entirety before use and keep it for future
reference.
SAFETY INSTRUCTIONS
IMPORTANT SAFEGUARDS:
To avoid the risk of serious injury when using your Plug-In Fragrance
Diffuser, basic safety precautions must be followed, including but not limited
to the following.
- Do not install the device where children can reach it.
- Do not tilt the device as oil may spill.
- Do not use the device in high-temperature or wet environments.
- Keep the device away from fire and heat sources, and do notstore flammable or explosive materials near the device.
- Install the device in a well-ventilated area.
- Do not use flammable, explosive, corrosive, or other hazardous solvents with the device.
- Do not block the sprayer by hand or other obstructions when the device is in use.
- Do not spill water or conductive, corrosive liquids on the device or allow such liquids to get inside of the device.
- Do not overuse the device without pausing. The average daily use time is not to exceed 14 hours.
- Choose a safe way to cut off the power in extreme weather environments.
SPECIFICATIONS
Product Name | SMART PLUG-IN FRAGRANCE DIFFUSER |
---|---|
Model Number | SAM130S |
Rated Voltage | AC 120V |
Rated Power | 1.5W |
Capacity | 4.4OZ (130ml) |
Use Ambient Temp. | 41° – 113°F |
Use ambient humidity | 30%-80% |
Unit Weight | 0.64 Lbs |
Unit Dimensions | 3.9 x 2.8 x 7.7 Inches |
COMPONENTS
WARNING
- Please keep the machine vertical. Tilting may cause oil to overflow and the long-term efficiency of the machine may be affected.
- Do not use this product in high humidity or high-pressure environments.
- Do not install the device in a place that cannot bear load or may fall over.
- Do not overuse the device without pausing. The average daily use time is not to exceed 14 hours.
- Pay attention to adding essential oil after ii is used. If operated without essential oil for prolonged periods, the machine will be damaged.
OPERATION
-
Remove the bottom cover.
-
Add essential oil to the bottle.
Note : Water does not need to be mixed with the essential oil. -
After plugging in, the indicator will blink green and the diffuser wiill start working. Default mode: The diffuser will work for 10 seconds and pause for 120 seconds, then repeat.
ENABLING THE WI-Fl CONNECTION
Step 1
Preparation before connecting:
- Make sure your Wi-Fi router supports 2.4GHz (NOT 5GHz) and 802.11 b/g/n bands. Note: Most 5GHz routers can also be set to 2.4GHz band or dual band.
- Make sure the Wi-Fi name and password are correct.
- Make sure your smartphone or tablet supports a 2.4GHz network.
- Download the App named AIR.ai from the App Store (iOS devices) or Google Play (Android devices).
Step2
Connect your phone to the same 2.4 GHz wireless network as your Plug-In
Fragrance Diffuser.
Open AIR.ai and tap the”+” icon in the top right corner.
The add device page will appear. Tap “Go to add.” The machine indicator will
quickly flash blue, meaning that the machine is connecting.
Step 3
Tap “Next.”
Enter the password of your Wi-Fi network when prompted (same Wi-Fi network on
which your smartphone is connected) then click confirm.
Important note:
Smart Scent Air Machine must be connected to a 2.4 GHz Wi-Fi network. If your
router broadcasts 2 Wi-Fi bands (2.4GHz and 5GHz}, consult your router user
manual to learn how to select the 2.4 GHz Wi-Fi band.
Step4
Your device is now connected. You can find the Plug-In Fragrance Diffuser in
the device list.
The indicator will slowly flash blue when the unit is connected successfully.
CONTROL
Mode control with AIR.ai app
Reset Operation
Power off the device. Press and hold the power button, and power on the device
at the same lime until you hear five consecutive beeps. The device is now
resetting. Release the button and wait for the reset to complete. Do not power
off during the reset process.
CLEANING INSTRUCTIONS
The machine needs to be cleaned under the following circumstances:
- You’re about to change to another kind of essential oil.
- The atomization volume goes weak.
- Hasn’t been used in a long time.
Cleaning steps:
1. Turn off the power.
2. Unscrew the lower cover and take out the oil bottle.
3. Find a larger container and fill with isopropyl alcohol. Then soak the oil
bottle for 5- 10 minutes.
4. Place in a well-ventilated area to air dry.
TROUBLESHOOTING
Symptom | Possible Causes | Approach |
---|---|---|
The indicator does not light up and the diffuser cannot be started | **** No | |
power | **** Reconnect the power | |
**** There is no mist produced | The oil tank has too little oil. | Add |
essential oil to the tank
The machine is in the standby perriod| Normal, wait for the standby
period to end (Default: 120 seconds)
**** Machine works but no scent or scent is weak| The nozzle is
blocked.| Contact AIRTHEREAL for support
The pipette of the oil bottle fell off.| Reconnect the pipette.
The atomizer is blocked.| Clean the atomizer
There are impurities in the essential oil.| Replace with pure essential oil.
Oil overflow
| Check whether the oil bottle is loose| **** Please install it correctly
Check whether the gasket
of the atomizer head is damaged
| Contact AIRTHEREAL for support
Did not keep the machine vertical| Please keep the machine vertica l
Abnormal Noises| Internal structure is damaged| Contact AIRTHEREAL for
support
If the above methOOs cannot be improved, please oonsult the customer service
hotline for assistance
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
LIMITED WARRANTY
We provide a 1-year warranty. For more information please visit www.airthereal.com/warrantv.
-
What’s covered?
Defects due to faulty materials and/or workmanship of the product. -
What’s not covered?
1. Damage caused by the owner when attempting to fix or altering the product by himself or herself.
2. Damage caused by misuse, abuse, neglect, alterations or unauthorized repair.
3. Natural depreciation.
-
Warranty Period
Warranty becomes effective from the date of original purchase and will last for 1 year. -
Who’s covered?
This limited warranty is only effective for the original purchaser, it is non- transferable. -
How to request warranty services?
To obtain the benefit of this warranty, please email support@airthereal.com. Our customer service will address your issue as soon as possible!
ATTRIBUTIONS
- Apple App Store is a trademark of Apple Inc.
- Google, Android, and Google Play are trademarks of Google LLC. Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
- Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
- iOS is a registered trademark of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Arovast Corporation is under license.
Always here to help you www.airthereal.com
WARNING Cancer and Reproductive Harm
www.p65warnings.ca.gov
Produced for: West Ryder Technology LLC 2330 Paseo Del Prado STE C304
Las Vegas, NV 89102
Made in China
V 202312
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>