ANKER A8382 655 8-In-1 USB-C Hub High-Speed File Transfer User Manual
- June 5, 2024
- Anker
Table of Contents
ANKER A8382 655 8-In-1 USB-C Hub High-Speed File Transfer User Manual
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
- Open flame sources, such as candles, must not be placed near this product.
- Only use a dry cloth or brush to clean this product.
At a Glance
Item
|
Description
---|---
1. USB-C Connector| Plug into the USB-C port of a USB-C compatible computer
2. PD-IN Port| Connect to a USB-C PD charger to charge your devices
3. HDMI Port| Connect to a device with an HDMI port to stream video at
resolutions up to 4K@60 Hz
4. Ethernet Port| Connect to a router or modem at 10/100/1000 Mbps
5. SD Card Slot|
- Insert an SD card to copy files to and from your device
- Compatible with SD 4.0 or earlier
6. microSD Card Slot| Insert a microSD card to copy files to and from your
device
7. USB-A Port| Connect to a USB-A device to support data transfer at speeds
up to 10 Gb/s
8. Audio Port| Connect to earphones or other devices with a 3.5 mm connector
9. Power Indicator| Turns white when powered on
Specifications
| Data Transfer Speed| 10 Gbps
---|---|---
| SD 4.0| 312 MB/s
| Supported Systems| Windows 10 / 8 / 7, macOS 10.6 or later, Chrome OS
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A8382 is in compliance with Directives 2014/30 /EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party:
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-003(B)/NMB-3(B)
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Customer Service
18-Month Limited Warranty.
Lifetime Technical Support
support@anker.com
support.mea@anker.com (For Middle East and Africa
Only)
(US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00
(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00
(Middle East & Africa) +971 42463266 Sun-Thu 9:00 – 17:30
(UAE) +971 8000320817 Sun-Thu 9:00 – 17:30
(KSA) +966 8008500030 Sun-Thu 8:00 – 16:30
(Kuwait) +965 22069086 Sun-Thu 8:00 – 16:30
(Egypt) +20 8000000826 Sun-Thu 7:00 – 15:30
(AU) +61 3 8331 4800 Mon-Fri 8:30 – 17:00 (AEST)
(TR) +90 0850 460 14 14 Mon-Fri 9:00 – 18:00
(RU) +8 (800) 511-86-23 Mon-Fri 9:00 – 18:00 (MSK)
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
@anker_ocial
@anker_jp
@Anker Deutschland
@Anker Japan
@Anker
@AnkerOcial
@Anker_JP
For FAQs and more information, please visit:
anker.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>