FERM PDM1052 Impact Drill Instruction Manual

FERM PDM1052 Impact Drill

Specifications

• Mains voltage: 230 V~
• Mains frequency: 50 Hz
• Power input: 800 W
• No-load speed: 0 – 3,000 /min
• Impact rate: 0 – 48,000 /min
• Protection class: IP 20
• Weight: 2.2 kg
• Max. drill diameter:
• Wood: 25 mm
• Concrete: 13 mm
• Steel: 10 mm
• Noise values:
• Sound pressure (LPA): 91.7 dB(A)
• Acoustic power (LWA): 102.7 dB(A)
• Uncertainty (K): 3 dB(A)

Original instructions

IMPACT DRILL
PDM1052
Thank you for buying this Ferm product.
By doing so you now have an excellent product, delivered by one of Europe’s leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.

SAFETY WARNINGS

WARNING

• Read the enclosed safety warnings, the additional safety warnings and the instructions.
• Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury.
• Keep the safety warnings and the instructions for future reference.

The following symbols are used in the user manual or on the product:

• Read the user manual.
• Risk of personal injury.
• Risk of electric shock.
• Immediately remove the mains plug from the mains if the mains cable becomes damaged and during cleaning and maintenance.
• Wear safety goggles.
• Wear hearing protection.
• Wear a dust mask.
• Wear safety gloves. Variable electronic speed.
• Double insulated.
• Do not dispose of the product in unsuitable containers.
• The product is in accordance with the applicable safety standards in the European directives.

Additional safety warnings for impact drills

• Do not work materials containing asbestos.
• Asbestos is considered carcinogenic.
• Wear safety goggles.
• Wear hearing protection to avoid the risk of hearing loss.
• If necessary, use other protective means, such as safety gloves, safety shoes, etc.
• Hold the machine with one hand on the main grip and the other hand on the auxiliary grip. Risk of personal injury.
• Hold the machine by the insulated gripping surfaces where the accessory may contact hidden wiring or the mains cable. If the accessory contacts a ’live’ wire, the exposed metal parts of the machine can also become ’live’. Risk of electric shock.
• Do not use accessories which are not specifically designed and recommended by the manufacturer. Risk of personal injury.
• Only use accessories that are suitable for use with the machine.
• Only use accessories with the correct dimensions. Make sure that the accessories are properly mounted.
• Inspect the machine and the accessories before each use. Do not use accessories which are bent, cracked, or otherwise damaged. If the machine or one of the accessories is dropped, inspect the machine or the accessory for damage. If necessary, replace the accessory.
• Let the machine run at no load in a safe area after mounting the accessories. If the machine vibrates strongly, immediately switch off the machine, remove the mains plug from the mains, and try to solve the problem.
• Make sure that the maximum speed for the accessory is larger than or the same as the maximum speed of the machine. Refer to the rating plate on the machine.
• Before use, remove all nails and other metal objects from the workpiece.
• Make sure that the workpiece is properly supported or fixed.
• Keep your hands away from the workpiece during use.
• Never put the machine down on a table or a workbench before it has been switched off.

Electrical safety

Always check that the voltage of the power supply corresponds to the voltage on the rating plate.

•  Do not use the machine if the mains cable or the mains plug is damaged.
• Only use extension cables that are suitable for the power rating of the machine with a minimum thickness of 1.5 mm2. If you use a extension cable reel, always fully unroll the cable.

Technical specifications

Max. drill diameter

Wear hearing protection.

Vibration level
The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned.

• using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
• the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level

Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns.

DESCRIPTION (FIG. A)

Your impact drill has been designed for drilling holes in wood, metal and plastics and for hammer drilling in brick and concrete.

1. On/off switch
2. Lock-on button
3. Speed adjustment wheel
4. Forward/reverse switch
5. Switch for drilling / hammer drilling
6. Chuck
7. Main grip
8. Auxiliary grip
9. Depth stop
10. Rear sleeve
11. Front sleeve
12. Power indicator light

ASSEMBLY

Before assembly, always switch off the machine and remove the mains plug from the mains.

Exchanging and removing drill bits Fig. A – B

The machine is suitable for use of the following drill bits:

• Wood (HSS)
• Metal (HSS)
• Concrete / masonry (hard metal)

Mounting and removing the auxiliary grip (fig. C) Mounting

• Loosen the auxiliary grip (8).
• Slide the auxiliary grip (8) over the chuck (6).
• T urn the auxiliary grip (8) to the required position.
• Tighten the auxiliary grip (8).

Removing

• Loosen the auxiliary grip (8).
• Remove the auxiliary grip (8) from the chuck (6).
• Tighten the auxiliary grip (8).

Mounting and removing the depth stop (fig. D)

The depth stop is used to set the maximum drilling depth.

USE

Switching on and off (fig. A)

• T o switch on the machine, press the on/off switch (1). The further the on/off switch (1) is pressed, the higher the speed of the machine.
• T o switch the machine to continuous mode, keep the on/off switch (1) pressed and simultaneously press the lock-on button (2).
• T o switch off continuous mode, press the on/off switch (1) again.

Forward/reverse switch (fig. A)

Do not change the direction of rotation during use.

• For clockwise rotation, slide the forward/reverse switch (4) to the left.
• For counterclockwise rotation, slide the forward/reverse switch (4) to the right.

Setting the maximum drilling speed (fig. A)

• T urn the speed adjustment wheel (3) clockwise to increase the maximum drilling speed.
• T urn the speed adjustment wheel (3) counterclockwise to decrease the maximum drilling speed.

Setting the operating mode (fig. E)

Do not change the operating mode during use.

• Set the switch (5) to position ”A” for drilling.
• Set the switch (5) to position ”B” for hammer drilling.

CLEANING AND MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.

• Regularly clean the housing with a soft cloth.
• Keep the ventilation slots free from dust and dirt. If necessary, use a soft, moist cloth to remove dust and dirt from the ventilation slots.
• Regularly clean the chuck and the drill bit to avoid inaccuracies during use.

WARRANTY

Consult the enclosed warranty terms.

ENVIRONMENT

Disposal

The product, the accessories, and the packaging must be sorted for environmentally friendly recycling.

Only for EC countries
Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.
The product and the user manual are subject to change. Specifications can be changed without further notice.

DECLARATION OF CONFORMITY PDM1052 – IMPACT DRILL

We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:

EN55014-1, EN55014-2, EN60745-1, EN60745-2-3, EN61000-3-2, EN61000-3-3
2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU

Zwolle, 01-04-2021\

Ferm • Lingenstraat 6 • 8028 PM • Zwolle The Netherlands

Spare parts list

Exploded view

WWW.FERM.COM

References

• FERM Power Tools - Power to create

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>