DEERFAMY Ice Fishing Auger User Manual

Ice Fishing Auger

User Manual

THANK YOU
Thank you for purchasing Deerfamy E-Drill Ice Auger Kit! We strive to provide the highest of stands in terms of usability and durability for all our products. With proper care, your Deerfamy auger will serve you many years to come. Please take the time to read this manual carefully to learn how to correctly operate and maintain your auger.
CAUTION
CAUTION INDICATES YOU CAN BE HURT OR YOUR EQUIPMENT CAN BE DAMAGED IF THE SAFETY AND OPERATING INSTRUCTIONS FOLLOWING THIS SIGNAL  WORD ARE NOTOBSERVED.

Safety Precautions

Owner’s Responsibilities

1. Accurate assembly is necessary to ensure safe and effective usage of the ice auger.
2. Read and follow all safety and assembly instructions.
3. Maintain the ice auger according to directions and schedule included in this operator’s manual.
4. Ensure anyone who uses the ice auger is familiar with all controls and safety precautions.

Special Messages

This manual contains special messages to bring attention to potential safety concerns, machine damage as well as helpful operating and servicing information.Please read all the information carefully to avoid injury and machine damage.
NOTE:
General information is given throughout the manual that may help the operator in the operation or service of the machine.

Important Safety Precautions

Please read this section carefully!
Operate the auger according to the safety instructions and recommendations outlined within this manual. Anyone who uses this auger must also read the instructions and be familiar with the controls.
Throughout this manual, you’ll find constant reminders regarding safety.
We really meant it!
This symbol points out important safety instructions which if not followed could endanger your personal safety. Read and follow all instructions in this manual before attempting to operate this equipment.

1. The ice blades are VERY SHARP. Use extreme caution when drilling a hole or replacing the blades. Put blade guard back on after each use.
2. During operation, always keep hands, feet, hair and loose clothing away from any moving parts.
3. Never allow children to operate E-Drill. Adults should not operate without proper instruction.
4. As with any machinery, do not operate the E-Drill while under the influence of alcohol or drugs.
5. Inspect regularly to be sure all screws, nuts and bolts remain tight.
6. If the E-Drill becomes stuck within a hole, engage the reverse setting on your cordless drill and engage to steadily withdraw the auger from the jam.

This auger offers an innovative combination of nylon flighting and a complete conversion kit that makes it possible to be turned into an electric powered drill. Simply attach a cordless drill to transform your manual ice auger into an automatic drill.

ICE AUGER PARTS LIST

Basic Version

1. Ice Auger Drill+Top Plate+Blade Cover
2. Extension Rod
3. Gloves
4. Ice Fishing Skimmer Scoop

Assembly Instructions

Upgraded Version

1. Ice Auger Drill+Blade Cover
2. Extension Rod
3. Gloves
4. Ice Fishing Skimmer Scoop

Assembly Instructions

Tips for electric-powered drill conversion

• For best performance with your auger, you’ll need: l/2″drill chuck (Required)
• A 18 Volt/4 Amp Lithium Ion Battery (or higher)
• A Minimum of 725 in-lbs of torque and 550 RPM, a 18 volt drill will work however, 20 to 24volt will have a better result

Operating Instructions & Recommendations

1. Always be certain your drill chuck is securely attached and tightened down to the drill adapter before engaging.
2. For best results always use the slowest speed setting in “Drill” mode. NOTE: Drill assembly must turn clockwise to operate.
3. There is no need to apply great force to cut, rather, maintain slight downward pressure on the drill and you will feel the auger gradually drawing itself through the ice.
4. When cutting thick ice, be sure to pull the bit upwards periodically to ensure excess ice shavings do not accumulate, which may bind the drill or make it hard to lift the flighting Out once the hole cutting is complete. If your auger bit becomes stuck in the ice hole, switch the drill to reverse and holding the handle firmly engage the trigger to slowly allow the auger bit to free itself.

WARNING: Always place protective cover over blades when notin use and never turn on the electric drill unless drilling!
WARNING: Must Read before Operation!
Failure to read, understand and follow all warnings and instructions listed could result in serious injury or death! While the E-Drill is a lightweight device, it is very powerful and dangerous to operate. Keep all body parts, loose clothing and foreign objects clear of the rotating auger during operation.

1. The E-Drill is designed to work with a l/2″cordless drill.
2. Be sure to leave the blade protective cover in place until you are ready to drill.
3. Never adjust drill speed while drilling ice.
4. For optimal performance, always position the drill adapter at 90 degrees to the ice when in operation.
5. Keep your cordless drill out of water.
6. The warmer your battery is kept, the more holes you can drill on a single charge.
7. Never drill into soil or stone or allow the E-Drill blades to touch any other sharp objects.
8. Periodically clear the hole of slush when cutting through wet or slushy ice.

Warranty Terms and Conditions

PRODUCT WARRANTY: 1-YEAR LIMITED WARRANTY
Deerfamy, warrants this E-Drill Auger bit under a one-year limited warranty to be free from defects in materials or workmanship or both for a period not exceeding twelve consecutive months from the date of original purchase by the first retail consumer or commercial end user.

Warranty & Customer Service

If you are missing pieces or get damaged items, just sending us your Amazon order ID, Item Pictures, Address, and phone number, we will offer free one to you. If you need any help, please contact us via Amazon APP. If Amazon APP doesn’ twork, please contact us manufacture email: Service@deerfamy.com

Service@deerfamy.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>