anko CS-622 Mini Waver User Manual

anko CS-622 Mini Wave

Product Information

Specifications

• Voltage : 100-240V~ 50-60Hz
• Power : 27W
• Class II Appliance

Introduction

Mini Waver CS-622 is a hair styling appliance designed to wave human hair. It is not suitable for use on artificial hair or animals. Please note that the appliance may produce different results depending on the hair type, so we recommend conducting a trial on a hidden spot before the first use. This hair waver is not recommended for damaged or bleached hair.

Parts

1. On/Off switch
2. Power indicator
3. Thumb rest
4. Top barrels
5. Bottom wave plate
6. Cool tip

Product Usage Instructions

Warning: Never touch the hot curling barrels and wave plate.

Preparing for Use

Before using the Mini Waver CS-622, make sure to follow these steps:

1. Ensure the appliance is turned off and unplugged.
2. Allow the appliance to cool down completely before cleaning or storing.
3. If you have damaged or bleached hair, it is not recommended to use this hair styler. For other hair types, we recommend conducting a trial on a hidden inconspicuous area of your hair before the first use.

Operating the Appliance

To use the Mini Waver CS-622, follow these steps:

1. Plug the appliance into a power outlet.
2. Turn on the appliance using the On/Off switch.
3. Wait for the power indicator to show that the appliance is ready for use.
4. Hold the appliance by the thumb rest for better control.
5. Place a section of hair between the top barrels and bottom wave plate.
6. Close the appliance gently, allowing the hair to be waved.
7. Hold for a few seconds, then release the appliance to reveal the waves.
8. Repeat this process for all desired sections of hair.

Cleaning and Maintenance

Attention: Turn off the appliance and disconnect the plug from the power outlet before cleaning. Allow the appliance to cool down completely before cleaning.

Attention: Do not use any alcohol, acetone, gasoline, abrasive cleaning agents, etc. to clean the plastic components. Do not use hard brushes or metal objects for cleaning.

Warning: Do not clean the appliance while it is still hot to avoid the risk of burning.

FAQ

• Can I use the Mini Waver CS-622 on artificial hair or animals?
• No, this appliance is specifically designed for waving human hair only. It should not be used on artificial hair or animals.
• Can I use the Mini Waver CS-622 on damaged or bleached hair?
• No, it is not recommended to use this hair styler on damaged or bleached hair.
• Can I clean the appliance with alcohol or abrasive cleaning agents?
• No, do not use any alcohol, acetone, gasoline, abrasive cleaning agents, etc. to clean the plastic components of the appliance. Use gentle cleaning methods and avoid hard brushes or metal objects.
• Can I clean the appliance while it is still hot? No, it is important to turn off the appliance and allow it to cool down completely before cleaning to avoid the risk of  burning.

IMPORTANT SAFEGUARDS

When using any electrical product, always follow these basic safety precautions:

READ ALL INSTRUCTIONS BEFORE USE.

Please read this instruction manual before using your product and keep it in a safe place for future reference. If you pass the appliance on to anyone else, please include this manual.

SAFETY PRECAUTIONS

• Carefully read all instructions before operation and retain for future reference.
• Do not place near the edge of a bench or table during operation .
• Always place the appliance on a heat-resistant stable flat surface.
• Ensure the surface is dry, level, clean and free of liquid and other substances.
• Do not leave the appliance unattended when the appliance is connected to mains power. Always ensure the appliance is turned off by switching off and then disconnecting the appliance from mains power when not in use.
• Always keep the appliance clean.
• Fully unwind the cord before use.
• To protect against electric shock, do not immerse the power cord, plug or appliance in water or any other liquid.
• Do not allow the cord to hang over the edge of the table or bench, touch hot surfaces or become knotted.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with this appliance.
• If the supply cord is damaged do not use. Any repairs to the product must be carried out by qualified electrical person only or the product must be disposed.
• This product is intended for household use only. Do not use it outdoors or for commercial industrial purposes.
• NEVER grasp the appliance, power cable or power plug with wet hands.
• Always remove the power cable from the socket by pulling on the plug; do not pull on the cable itself. Do not hold or carry the appliance by the power cord.
• Do not fold or crush the power cable. Ensure that the power cable does not run over sharp edges.
• Please do not attempt to dismantle the appliance. This appliance has no user- serviceable parts inside.
• When the appliance is used in a bathroom, disconnect from mains power after use. Using the product proximity of water presents a hazard even when the appliance is switched off.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• For additional electrical protection, the installation of a residual current device (RCD/ Safety switch) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. If unsure, check with your electrician.
• For cleaning and maintenance, please refer to “CLEANING AND MAINTENANCE” section.
• Burn hazard. Keep appliance out of reach from young children, particularly during use and cool down.

RISK OF FIRE

• Do not leave the appliance unattended when in use.
• To avoid a build-up of heat, NEVER cover the appliance. Do not use the appliance under a blanket or at other poorly ventilated locations
• Avoid the addition of heat from other sources, e.g., from direct sunlight, heating appliances, other devices, etc.
• Do not use an extension cable. In the event of danger, the supply cord plug must be quickly and easily accessible.

ELECTRICAL REQUIREMENT

• Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply .

IMPORTANT

• The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live power outlet socket.
• If the supply cord is damaged, DO NOT USE. Any repairs to the product must be carried out by qualified electrical person only or the product must be disposed.

Danger of suffocation!

• Keep all packaging material away from children. Appropriately dispose of the packaging materials. Contact your local authorities about collection points or waste separation.

Caution Risk of Burning!

• The appliance gets very hot! Take care to avoid contact between the hot surfaces of the unit and the skin, paying particular attention to the face, neck and hands
• WA RNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
• Class II Appliance.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

INTRODUCTION

Use this appliance to wave human hair only. Do not use this appliance on artificial hair or animals.

IMPORTANT! The appliance may have different results depending on the hair type. Therefore, we recommend to do a trial at a hidden spot before first use. The hair waver is not recommended for damaged or bleached hair.

PARTS

1.  On/Off switch
2. Top barrels
3. Power indicator
4. Bottom wave plate
5. Thumb rest
6. Cool tip

BEFORE FIRST USE

• After unpacking the appliance, check for transport damage and that all the parts mentioned in this manual are present. In the event of damaged or missing parts, return the product to respective Customer Service Centre.
• Do not discard the original box. It can be used for storage and dispatch to avoid transport damage.
• Clean the appliance as described in Cleaning and Maintenance. For your safety make particular attention to the safety instructions in the manual.

OPERATION

• WARNING! Never touch the hot curling barrels and wave plate.
• WARNING! Always use the handle to hold the hair waver.
• ATTENTION! The hair waver cools down slower than they heat up.
• Fully unwind the supply cord before turned on the appliance.
• Place the appliance on a smooth, flat, dry and heat resistant surface.
• Connect the power cord plug into a mains power outlet socket.
• Push the ON/OFF switch to ON position, the power indicator will light up. ATTENTION! The hair waver heats up very fast. It takes approx. 3 minutes to each max. temperature.
• When the appliance is ready, you may start hair styling.
• Comb through hair to prevent knots and tangles and then divide hair into equal sections.
• Take a section of hair with no more then 3cm wide. Place the hair strand between the top barrels and wave plate , then close the handles.
• Hold the hair waver in position for 10-15 seconds to create gentle hair waves.
• Release the handles and gently pull the hair waver away from head.
• CAUTION! Do not hold the hair between the plates for more than a couple of seconds as this may damage/burn your hair.
• To allow the curl to set, do not comb or brush the hair until it cools.
• Repeat the process around the head until you have the amount for curls desired.
• Turn off the appliance after use, make sure the power indicator has gone off.
• Unplug the appliance from mains power socket and allow it to cool before storage.

IMPORTANT! The appliance may provide different results depending on the hair type. Therefore, we recommend carrying out a trial on a hidden inconspicuous area of your hair before first use.

This hair styler is not recommended for use on damaged or bleached hair.

CLEANING AND MAINTENANCE

ATTENTION! Turn off the appliance and disconnect the plug from mains power outlet, allow the appliance completely cool down before cleaning.

ATTENTION! Do not use any alcohol, acetone, gasoline, abrasive cleaning agents, etc. to clean the plastic components. Do not use hard brushes or metal objects for cleaning.

Risk of burning! Do not clean the appliance while still hot.Wipe the appliance with a dry cloth.

• Never submerge the appliance in water or let water run over the heating plates or the appliance.
• The heating plate and barrels can be cleaned with a slightly damp cloth and a little detergent if necessary.
• Dry thoroughly after cleaning.

STORAGE

• Store the appliance in a cool, dry location, away from children and pets.
• After use do not wrap the cord around the appliance as this may cause the cord to fracture. Coil cord loosely by the side of the appliance after use and when storing.
• If the appliance is not used for an extended period, store it preferably in its original packaging.

DISPOSAL

Do not dispose of this product with normal household waste collection. If unsure, contact the local council waste management service for proper disposal facilities available for your area.

TECHNICAL DATA

• Voltage : 100-240V~ 50-60Hz
• Power : 27W

Warranty

12 Month Warranty

Thank you for your purchase.

Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.

This warranty is in addition to your rights under the Australian Consumer Law. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation. We will provide you with your choice of a refund, repair (where possible) or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any difficulties with your product. Warranty claims and claims for expenses incurred in returning this product can be addressed to the respective Customer Service Centre. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure

Contacts

Contact for Kmart purchases

• Kmart Australia Ltd.
• C/- Customer Service Centre 690 Springvale Road, Mulgrave Vic 3170
• Customer Service: 1800 124 125
• (Australia) or 0800 945 995
• (New Zealand) or via Customer Help at kmart.com.au

Contact for Target purchases

• Target Australia Pty Ltd
• C/- Customer Service Centre 2 Kendall Street, Williams Landing, Vic, 3027
• Customer Service: 1300 753 567 or via Customer Help at target.com.au/help/contact-us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>