BIGBEN PARTYBTHPCUBE Bluetooth Speaker Instructions

BIGBEN PARTYBTHPCUBE Bluetooth Speaker

Specifications:

• Bluetooth Version : Bluetooth
• Power Output : 30W RMS, 180W Max
• Frequency Response : 60 Hz – 20 kHz
• Signal-to-Noise Ratio: 65 dB
• Distortion : 1%
• Speaker Type : Tweeter and Woofer
• Bluetooth Range : 10m
• Dimensions : 264mm x 255mm x 302mm

Product Usage Instructions

Getting Started:

1. Read the user guide carefully before operating the unit.
2. Ensure the device is fully charged before use.

Safety Warning and Notice:

1. Never remove the device casing.
2. Do not place the device on top of other electrical equipment.
3. Protect the power cable from being stepped on or pinched.
4. Do not use the device near water or in damp environments.

Controls and Functions:

• Bass Increase Button: Press to increase bass volume.
• SD Card/Pairing Button: Press to switch to Bluetooth mode and pair with another device.
• Play/Pause Button: Press to play or pause music. Long-press for next track, and fast forward.
• Battery Warning: If using a 5V1A adapter, full charging time is 8 hours.

Getting started

• Take the device out of the box.
• Remove all the packaging from the product.
• Place the packaging inside the box or dispose of it safely in compliance with the waste sorting instructions shown on the outside.

Safety warning and notice
You must read and understand all the instructions before using this device. The warranty will not apply if damage is caused by failure to follow the instructions.

1. Never remove the device casing.
2. Never place this device on top of other electrical equipment.
3. Protect the power cable from being stepped on or pinched, particularly at the plugs, sockets, and the point where it exits the device. Make sure that the power rating corresponds to the voltage shown on the rating plate at the rear of the device. Always pull the plug from the socket when disconnecting from the mains. Never pull on the cable. Ensure you have completed all the other connections before connecting the mains plug.
4. Only use attachments/accessories that are recommended by the manufacturer.
5. Entrust all device repairs to qualified repairers. Repair is needed when the device has been damaged in any fashion, and in particular:
   • if the power cable is damaged;
   • in the event of a liquid spill or objects being inserted into the device;
   • if the device is exposed to rain or dampness;
   • if the device does not operate normally;
   • or if the device has been dropped or impacted.
6. The series panel is located on the bottom of the device.
7. Never block the air vents.
8. Make sure you have enough space for ventilation. Place the product on a stable surface.
9. This device must be used in a moderate climate, away from direct sunlight, naked flames or sources of heat, heaters, cookers or any other devices (including amplifiers) that generate heat. Do not install near a heat source.
10. The batteries (battery pack or inserted batteries) must not be exposed to excessive heat, such as sunshine, fire, etc.
11. Always unplug the device before cleaning it. Never lubricate any part of this device. Clean it using a soft cloth. Do not use abrasive products or harsh cleaners.
12. Ensure that you always have easy access to the power cable, plug or adapter to disconnect this device from the mains if necessary.
13. Do not use this device near water. It must not be dripped on or splashed. Do not use this device in a damp or wet environment.
14. Disconnect this device in the event of a storm, or if you intend not to use it for a long period of time.
15. This device can be used by children aged 8 and over, and by persons with a physical or sensory disability, learning difficulties or a lack of experience and knowledge, provided they are supervised or have received instructions on the safe use of the device, and understand the risks involved. Children must not play with the device or power cable (risk of strangulation). Children must not clean or maintain the device without supervision.
16. This device must only be supplied with very low safety voltage as indicated on the device.
17. The battery should be removed from the device before disposal. The device must be disconnected from the power supply when removing the battery.
18. The product must be at a minimal distance of 20 cm from the human body when working.
19. This device is for household use only; do not use outdoors.

CAUTION: RISK OF ELECTRIC SHOCK
DO NOT OPEN

ATTENTION: RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR

• The lightning bolt symbol within an equilateral triangle alerts users to the presence of dangerous uninsulated voltages, inside the device, that may present a risk of electric shock.
• The exclamation mark inside a triangle indicates the presence of important operating and maintenance (repair) instructions in the literature accompanying the device.

SYMBOLS

Contents of the box

Check and identify the contents of your box:

• 1 speaker
• 1 USB-C charging cable
• 1 AUX cable
• 1 user guide

Description of parts

Controls

1. Power button

2. Mode selector

3. Increase bass

4. Bluetooth disconnection / Play loop or repeat button / Pairing mode

5. Decrease volume

6. Increase volume

7. Previous track / Rewind

8. Play / Pause

9. Next track / Fast-forward

10. Light button / Light effects selection

11. Microphone input

12. External audio input (AUX-in)

13. TF card slot

14. USB port

15. USB-C charging port

Control functions

1. button : Press and hold to switch the speaker on, and press and hold it again to switch the speaker off.

2. “M” Mode switch : Briefly press the “M” button to enter mode “Bluetooth －〉USB－〉TF card－〉AUX IN” Press the “M” button to switch to Bluetooth mode, you’ll hear a “du-du” sound signal; select the PARTYBTHPCUBE Bluetooth name in your device to connect. Once the connection has been established, you’ll hear a sound signal.

3. BASS Increase Bass button: Press “ BASS ” to increase the bass volume. Press and hold “ BASS ” to reset to factory settings.

4. Bluetooth disconnection / Play in loop or repeat switch (USB and TF card mode) / Pairing mode : Switch the two speakers into Bluetooth mode, press and hold ” ” on one of the speakers (e.g. right channel) for more than 2 seconds to enter pairing mode. During the pairing process, the TWS indicator will flash. Once the connection is established, the device beeps and the blue indicator light on both speakers will come on. The speaker connected to your Bluetooth device acts as the main speaker (left channel). Press and hold ” ” for more than 2 seconds to exit pairing mode.
   When the Bluetooth device is connected, press ”  ” to force disconnection from the current Bluetooth device. Another Bluetooth device can look for the name of the speaker/the model number to connect.
   In USB/TF card mode: Playback change mode: press the “ ” button to repeat the playback of a track (with the indicator light on) or to repeat the playlist (with the indicator light off).

5. “-” button: Press briefly to decrease the volume

6. “+” button: Press briefly to increase the volume

7. button: Previous track / Rewind. In Bluetooth mode, briefly press “ ” to go back to the previous track. In USB/TF card mode, briefly press “ ” to go to the previous track or press and hold “ ****” to rewind.

8. Play/Pause, briefly press ” ” to play or pause the music.

9. button: Next track / Fast-forward button. In Bluetooth mode, briefly press “ ” to skip to the next track. In USB/TF card mode, briefly press “ ” to skip to the next track or press and hold “ ****” to fast-forward the music;

10. Press and hold to switch the speaker lights on/off. Briefly press to select your favorite light effect.

Battery warning

• Risk of fire or explosion if the battery is replaced with the wrong type of battery.
• Disposing of a battery in fire or a hot oven, crushing it or cutting it manually may cause an explosion.
• Leaving a battery in an ambient environment at extremely high temperatures may cause an explosion or leaks of a liquid or flammable gas.
• Subjecting a battery to extremely low atmospheric pressure may cause an explosion or leaks of a liquid or flammable gas.
• The maximum ambient temperature for using the product is 45 ℃.
• Please refer to the information on the underside of the packaging regarding safety and electrics before installing or using the device.

Device technical specifications

Type| Technical specifications| Type| Technical specifications
---|---|---|---
Broadband

loudspeaker

| 5.25″ (25 W)1| Tweeter| 1.5″ (5 W)1
Peak power| 180 W| Wireless

frequency

| 60 Hz – 20 kHz
RMS power| 30 W| Bluetooth

version

| 5.3
Power

consumption

| Max. 40 W| Maximum output

power (EIRP)

| 30 W
Input power| 5 V, 1-2 A| Distortion| ＜1%
Speaker

impedance

| 4Ω/woofer, 8Ω/tweeter| Speaker

frequency

| 60 Hz – 20 kHz
S/B ratio| 65 dB| Inputs| Bluetooth, AUX-in, USB,

TF card

Bluetooth pairing

name

| PARTYBTHPCUBE| Speaker| 5.25″ 4Ω speaker*1, 1.5

8 Ω speaker *1

Dimensions| 264255302 mm| Transmission

range

| 10 m

NB : the maximum connection distance is approximately 10 metres. Place your Bluetooth speaker as close as possible to the device to avoid any interference with the connection.

• If you’re using the 5V1A adaptor, it takes 8 hours for a full charge.
• Playback time at 50% volume: approx. 7 hours with lights on, 7.5 hours with lights off.
• Playback time at 100% volume: approx. 4 hours with lights on, 4.5 hours with lights off.
• The device may turn off in an environment with electrostatic discharge. The user must then recharge the battery and reset the device.

Environmental protection

• Your product has been designed and manufactured using high-quality materials and components that can be recycled and reused.
• Attention should be drawn to the environmental aspects of battery disposal.
• When the crossed-out wheelie bin symbol appears on a product, it means that the product is covered by European Directive 2002/96/EC. Please find out about the local sorting and collection system for electrical and electronic products. Please act according to local rules and do not dispose of your old products in your household waste. By ensuring this product is disposed of correctly, you are helping to prevent potentially negative consequences for the environment and human health.

Additional information

• When the device does not transmit audio output for a certain amount of time, it will automatically go into standby mode to save energy. It can then be switched back on using the power button
• If an incoming call is received while the PARTYBTHPCUBE system is connected to your mobile phone during music playback, the music will immediately pause when you answer the call, and start again once the call is finished (depending on the type of mobile phone, playback may sometimes stay paused after the end of the call).
• The word Bluetooth®, the brand and logo are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Bigben Interactive is under licence. All other brands and trade names are the property of their respective owners.
• This product is manufactured and sold under the responsibility of Bigben Interactive.
• All other products, services, corporate names, trademarks, trade names, product names and logos referenced herein are the property of their respective owners.

Declaration of conformity
Bigben Interactive hereby declares that the PARTYBTHPCUBE radio-electrical equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.bigben-interactive.co.uk/support/

Warranty

This product is guaranteed by Bigben for a period of 2 years from the date of purchase, except in countries of the European Economic Area, which offer a longer warranty period. We recommend that you keep your receipt for any claims. The warranty covers breakdowns due to defective material, a missing element or a manufacturing defect. In this case, contact our technical support. For any problem with a defective product, contact your point of purchase with your receipt. The warranty does not cover problems of improper use.

Support
https://www.bigben-interactive.co.uk/support/
09 69 39 79 59 – Monday to Friday, from 10 a.m. to 6 p.m. – Mainland France only

Made in China

Manufactured by BIGBEN INTERACTIVE SA

• 396, Rue de la Voyette
• CRT2 – FRETIN
• CS 90414
• 59814 LESQUIN Cedex – France
• www.bigben.eu

Fabricant : Bigben Interactive FRANCE
396, Rue de la Voyette, C.R.T. 2, Fretin,

MADE IN CHINA

FAQ

Q: How do I pair the speaker with my Bluetooth device?
A: Press and hold the pairing button to enter Bluetooth mode, then search for the speaker on your device’s Bluetooth settings and select it to pair.

Q: What is the Bluetooth range of the speaker?
A: The Bluetooth range of the speaker is up to 10 meters.

References

• Accueil | Bigben - Le Design Sonore pour tous | Audio | Thomson | Bigben Party | Bigben kids | Lumin'US | Colorlight | Metronic
• Support technique | Bigben - Le Design Sonore pour tous | Audio | Thomson | Bigben Party | Bigben kids | Lumin'US | Colorlight | Metronic
• Technical Support Center | Bigben Interactive Audio | Bigben | Audio | Thomson | Bigben Party | Teknofun | Kids Audio | Lumin'US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>