CHAUVET Professional COLORdash par h7x RGBAW UV LED User Manual
- June 16, 2024
- Chauvet Professional
Table of Contents
CHAUVET Professional COLORdash par h7x RGBAW UV LED
Edition Notes
The COLORdash Par H7X User Manual includes a description, safety precautions,
installation, programming, operation and maintenance instructions for the
COLORdash Par H7X as of the release date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, and COLORdash are registered
trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet
Lighting) in the United States and other countries. Other company and product
names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited
to, all design, text and images are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for
professional information purposes only. Chauvet expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its
content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in colour, on letter size paper (8.5 x
11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer
to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as
this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in
all respects. However, Chauvet assumes no responsibility and specifically
disclaims all liability to any party for any loss, damage or disruption caused
by any errors or omissions in this document, whether such errors or omissions
result from negligence, accident or any other cause. Chauvet reserves the
right to revise the content of this document without any obligation to notify
any person or company of such revision, however, Chauvet has no obligation to
make and does not commit to make any such revisions. Download the latest
version from
www.chauvetprofessional.com.
Document Revision
This COLORdash Par H7X User Manual is the 1st edition of this document. Go to
www.chauvetprofessional.com for the
latest version.
Before You Begin
What Is Included
- COLORdash Par H7X
- Seetronic Powerkon IP65 power cable
- Gel frame holder
- Gel frame
- Quick Reference Guide
Claims
- Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
- If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection.
- For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Convention | Meaning |
---|---|
1–512 | A range of values |
50/60 | A set of values of which only one can be chosen |
Settings | A menu option not to be modified |
< ENTER> | A key to be pressed on the product’s control panel |
Symbols
Symbol Meaning
- Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
- Important installation or configuration information. The product may not function correctly if this information is not used.
- Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.
FCC STATEMENT
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Safety Notes
Read all the following safety notes before working with this product. These
notes contain important information about the installation, usage, and
maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in
this User
The manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of
this product.
- The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 20 in (0.5 m) is not expected.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or its service agent.
- The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similar qualified person.
- The luminaire is intended for professional use only.
CAUTION
- This product’s housing may be hot when operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow the product to fully acclimate to the surrounding environment before connecting it to power.
- Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding notification of strobe use.
ALWAYS
- Disconnect from power before cleaning the product or replacing the fuse.
- Replace the fuse with the same type and rating.
- Use a safety cable when mounting this product overhead.
- Connect this product to a grounded and protected circuit.
DO NOT
- Open this product. It contains no user-serviceable parts.
- Look at the light source when the product is on.
- Leave any flammable material within 50 cm of this product while operating or connected to power.
- Connect this product to a dimmer or rheostat.
- Operate this product if the housing, lenses, or cables appear damaged.
- Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it (adhere to standards for the published IP rating).
- ONLY use the hanging/mounting bracket to carry this product.
- The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
- The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
- The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- In the event of a serious operating problem, stop using it immediately.
If a Chauvet product requires service, contact Chauvet Technical Support.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs
produce more heat than single LEDs, contributing to shorter lifespans if
always used at full intensity. The average LED lifespan is 40,000 to 50,000
hours. To extend LED lifespan, maintain proper ventilation around the product,
and limit the overall intensity.
Introduction
Description
The COLORdash Par H7X is a six pound die-cast portable RGBAW+UV LED wash with
a precise palette of subtle to saturated colors. Smooth 16-bit fading on four
selectable dimming profiles, and multiple PWM frequencies for flicker-free
output, make the COLORdash Par H7X the perfect choice whether in the rig or on
the floor, live or on camera. Program easily through the OLED display or at a
distance via RDM.
Features
- Rugged RGBAW+UV LED wash for events
- Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
- RDM (Remote Device Management) for added flexibility
- Selectable, smooth dimming curves for eliminate flicker and choppiness in fades
- Easy to read OLED display with password protection and touchscreen interface
- Advanced optics provide exceptional color mixing and high efficiency
- Double-bracketed yoke with omega bracket doubles as floor stand
Product Overview
Product Dimensions
Setup
AC Power
The COLORdash Par H7X has an auto-ranging power supply and it can work with an
input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s
power requirements (circuit breaker, power outlet, and wiring), use the
current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating
indicates the product’s average current draw under normal conditions.
- Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORdash Par H7X comes with a power input cable terminated with a
Seetronic Powerkon A connector on one end and an Edison plug on the other end
(U.S. market). If the power input cable that came with the product has no
plug, or if the plug needs to be changed, use the table below to wire a plug.
Connection | Wire (U.S.) | Wire (Europe) | Screw Color |
---|---|---|---|
AC Live | Black | Brown | Yellow or Brass |
AC Neutral | White | Blue | Silver |
AC Ground | Green/Yellow | Green/Yellow | Green |
Power Linking
It is possible to power link up to 16 COLORdash Par H7X products at 100 V, 20
products at 120 V, 34 products at 208 V, 38 products at 230 V, or up to 39
products at 240 V. Never exceed this number. Powerlinking cables can be
purchased separately.
Fuse Replacement
- Disconnect this product from the power outlet.
- Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
- Remove the blown fuse and replace with another fuse of the same type and rating (T2AL, 250 V).
- Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The COLORdash Par H7X can be linked to a DMX controller using a 3- or 5-pin
DMX connection. If using other DMX-compatible products with this product, it’s
possible to control each individually with a single DMX controller.
DMX Personalities
The COLORdash Par H7X uses a 3- or 5-pin DMX data connection for the 6CH, 8CH,
9CH, 13CH, and 14CH DMX personalities.
- Refer to the Introduction for a brief description of each DMX personality.
- Refer to the Operation chapter to learn how to configure the COLORdash Par H7X to work in these personalities.
- The Control Channel Assignments and Values section provides detailed information regarding the DMX personalities.
For information about DMX standards, Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled
devices to communicate bi-directionally along existing DMX cabling. Check the
DMX controller’s User Manual or with the manufacturer as not all DMX
controllers have this capability. The COLORdash Par H7X supports RDM protocol
that allows feedback to make changes to menu map options.
Master/Slave Connectivity
The Master/Slave mode allows a COLORdash Par H7X (the master) to control one
or more COLORdash Par H7X products (the slaves) without a DMX controller. One
COLORdash Par H7X becomes the master when running an auto program or in Static
mode. Each slave’s control panel must be configured to operate in Slave mode.
During the Master/Slave operation, the slaves will operate in unison with the
master.
- DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX controller signals may interfere with the signals from the master.
- The Operation section of this manual provides detailed instructions on how to configure the master and slaves.
- For more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX primer from the Chauvet website: www.chauvetprofessional.com.
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes. For our Chauvet Professional line of mounting
clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate
room for ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this
product.
- Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes.
- Make sure that the structure onto which you are mounting the product can support the product’s weight. See the Technical Specifications for weight information.
- When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
- When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The COLORdash Par H7X comes with an adjustable yoke to which a mounting clamp
(sold separately) can be directly attached. Make sure the clamp is capable of
supporting the weight of this product. For the Chauvet Professional line of
mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
Operation
Control Panel Description
Button | Function |
---|---|
< MENU> | Exits from the current menu or function |
< ENTER> | Enables the currently displayed menu or sets the selected value |
into the selected function
< UP>| Navigates upwards through the menu list or increases the value
when in a function
< DOWN>| Navigates downwards through the menu list or decreases the value
when in a function
Passcode
When prompted, enter the following passcode:
Main Level | Programming Levels | Description |
---|---|---|
DMX Address | 001–507 | Sets the starting address |
DMX
Channel
| 6CH| 6-channel: RGBAWUV
8CH| 8-channel: dimmer, RGBAWUV, strobe
9CH| 9-channel: 16-bit dimmer, RGBAWUV, strobe
13CH
| 13-channel: dimmer, RGBAWUV, strobe, color macro, color temperature, auto programs and speed, dimmer mode
14CH
| 14-channel: 16-bit dimmer, RGBAWUV, strobe, color macro, color temperature, auto programs and speed, dimmer mode
Static
|
Fixed Color
| R| Red
G| Green
B| Blue
A| Amber
W| White
UV| Ultraviolet (UV)
RG| Red/Green
RB| Red/Blue
RA| Red/Amber
RW| Red/White
RUV| Red/UV
GB| Green/Blue
GA| Green/Amber
GW| Green/White
GUV| Green/UV
BA| Blue/Amber
BW| Blue/White
BUV| Blue/UV
AW| Amber/White
AUV| Amber/UV
WUV| White/UV
RGB| Red/Green/Blue
RGA| Red/Green/Amber
RGW| Red/Green/White
Main Level| Programming Levels| Description
---|---|---
Static
(cont.)
|
Fixed Color
(cont.)
| RGUV| Red/Green/UV
RBA| Red/Blue/Amber
RBW| Red/Blue/White
RBUV| Red/Blue/UV
RAW| Red/Amber/White
RAUV| Red/Amber/UV
RWUV| Red/White/UV
GBA| Green/Blue/Amber
GBW| Green/Blue/White
GBUV| Green/Blue/UV
GAW| Green/Amber/White
GAUV| Green/Amber/UV
GWUV| Green/White/UV
BAW| Blue/Amber/White
BAUV| Blue/Amber/UV
BWUV| Blue/White/UV
AWUV| Amber/White/UV
RGBA| Red/Green/Blue/Amber
RGBW| Red/Green/Blue/White
RGBUV| Red/Green/Blue/UV
RGAW| Red/Green/Amber/White
RGAUV| Red/Green/Amber/UV
RGWUV| Red/Green/White/UV
RBAW| Red/Blue/Amber/White
RBAUV| Red/Blue/Amber/UV
RBWUV| Red/Blue/White/UV
RAWUV| Red/Amber/White/UV
GBAW| Green/Blue/Amber/White
GBAUV| Green/Blue/Amber/UV
GBWUV| Green/Blue/White/UV
GAWUV| Green/Amber/White/UV
BAWUV| Blue/Amber/White/UV
RGBAW| Red/Green/Blue/Amber/White
RGBAUV| Red/Green/Blue/Amber/UV
RGBWUV| Red/Green/Blue/White/UV
RGAWUV| Red/Green/Amber/White/UV
RBAWUV| Red/Blue/Amber/White/UV
GBAWUV| Green/Blue/Amber/White/UV
RGBAWUV| Red/Green/Blue/Amber/White/UV
Colour Temperature
| Warm White 1|
Preset white colour temperatures
Warm White 2
Warm White 3
Neutral White 1
Neutral White 2
Neutral White 3
Daylight 1
Main Level| Programming Levels| Description
---|---|---
Static
(cont.)
| Color Temperature (cont.)| Daylight 2|
Preset white colour temperatures
Daylight 3
Daylight 4
Manual Color Mixer
| Red|
000–255
|
Combine red, green, blue, amber, white, and ultraviolet to make a custom colour (0–100%)
Green
Blue
Amber
White
UV
Auto show| Auto 1–5| 001–100| Automatic programs and speed
Master/ Slave| Master| DMX mode (Master)
Slave| Slave mode
Dimmer Speed| Off| Linear dimmer
Dimmer1–3| Dimmer speed, fast ( 1 ) to slow ( 3 )
White Balance
| Off| Uses the factory default white setting
Manual
| Red|
125–255
| Sets the maximum red value
Green| Sets the maximum green value
Blue| Sets a maximum blue value
Amber| Sets maximum amber value
White| Sets the maximum white value
UV| Sets maximum UV value
LED
Frequency
| 600Hz|
Sets the Pulse Width Modulation frequency
1200Hz
2000Hz
4000Hz
6000Hz
25kHz
Back Light
| 10S| The display turns off after 10 seconds
30S| The display turns off after 30 seconds
2Min| The display turns off after 2 minutes
Always On| Display stays on
Key Lock| On| Locks the display. Passcode: < UP>,
< DOWN>, < UP>, < DOWN>, < ENTER>
Off
Information
| Fixture Hours| < ___ H>| Shows hours the product has been on
Version| < V__ >| Shows the current firmware version
UID| < >| Shows the product UID
Reset Factory| NO| Reset to factory default settings
YES
System Update
| Put the update file into the USB stick and connect it to the device through an adapter cable.|
Update firmware via USB to DMX adapter cable
NO
YES
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
To set the control personality:
- Go to the DMX Channel main level.
- Select the desired personality from 6CH, 8CH, 9CH, 13CH, or 14CH.
- See the Starting Address section for the highest starting address you can select for each personality.
- Make sure that the starting addresses on the various products do not overlap due to the new personality setting.
Starting Address
Each product will respond to a unique starting address from the controller.
All products with the same starting address will respond in unison. To set the
starting address:
- Go to the DMX Address main level.
- Select the starting address (001–507).
- The highest assignable starting address for 6CH is 507.
- The highest assignable starting address for 8CH is 505.
- The highest assignable starting address for 9CH is 504.
- The highest assignable starting address for 13CH is 500.
- The highest assignable starting address for 14CH is 499.
Control Channel Assignments and Values
6CH| 8CH| 9CH| 13CH| 14CH| Function| Value|
Percent/Setting
---|---|---|---|---|---|---|---
–| 1| 1| 1| 1| Dimmer| 000 ó 255| 0–100%
–| –| 2| –| 2| Fine dimmer| 000 ó 255| 0–100%
1| 2| 3| 2| 3| Red| 000 ó 255| 0–100%
2| 3| 4| 3| 4| Green| 000 ó 255| 0–100%
3| 4| 5| 4| 5| Blue| 000 ó 255| 0–100%
4| 5| 6| 5| 6| Amber| 000 ó 255| 0–100%
5| 6| 7| 6| 7| White| 000 ó 255| 0–100%
6| 7| 8| 7| 8| Ultraviolet| 000 ó 255| 0–100%
–| 8| 9| 8| 9| Strobe| 000 ó 010
011 ó 255
| No function
Strobe, slow to fast
6CH| 8CH| 9CH| 13CH| 14CH| Function| Value|
Percent/Setting
---|---|---|---|---|---|---|---
–
| ****
–
| ****
–
| ****
9
| ****
10
| ****
Color macro
| 000 ó 010
011
012 ó 029
030
031 ó 049
050
051 ó 069
070
071 ó 089
090
091 ó 109
110
111 ó 129
130
131 ó 149
150
151 ó 169
170
171 ó 200
201 ó 255
| No function Red full
Read full, green increases Red and green full Green full, red decreases Green full
Green full, blue increases Green and blue full
Blue full, green decreases Blue full
Blue full, red increases Red and blue full
Read full, blue decreases Read full
Read full, green and blue increase Red, green, and blue full
Blue full, red and green decrease Blue full
Red, green, and blue full
Colour temperature, warm to cool
–
| ****
–
| ****
–
| ****
10
| ****
11
| ****
Colour temperature
| 000 ó 005
006 ó 025
026 ó 050
051 ó 075
076 ó 100
101 ó 125
126 ó 150
151 ó 175
176 ó 200
201 ó 225
226 ó 250
251 ó 255
| No function Warm white 1
Warm white 2
Warm white 3
Neutral white 1
Neutral white 2
Neutral white 3
Daylight 1
Daylight 2
Daylight 3
Daylight 4 No function
–
| ****
–
| ****
–
| ****
11
| ****
12
| ****
Automatic programs
| 000 ó 010
011 ó 060
061 ó 110
111 ó 160
161 ó 210
211 ó 255
| No function Automatic program 1
Automatic program 2
Automatic program 3
Automatic program 4
Automatic program 5
–| –| –| 12| 13| Program speed| 000 ó 255| Automatic program speed, slow to fast
–
| ****
–
| ****
–
| ****
13
| ****
14
| ****
Dimmer mode
| 000 ó 051
052 ó 101
102 ó 152
153 ó 203
204 ó 255
| Preset dimmer speed from display menu Linear dimmer
Dimmer mode 1 (fastest) Dimmer mode 2
Dimmer mode 3 (slowest)
Configuration (Standalone) Fixed Color
To select a preset fixed colour combination:
- Go to the Static main level.
- Select the desired combination of R (red), G (green), B (blue), A (amber), W (white), and/or UV
(ultraviolet), from R, G, B, A, W, UV, RG, RB, RA, RW, RUV, GB, GA, GW, GUV, BA, BW, BUV,
AW, AUV, WUV, RGB, RGA, RGW, RGUV, RBA, RBW, RBUV, RAW, RAUV, RWUV, GBA, GBW,
GBUV, GAW, GAUV, GWUV, BAW, BAUV, BWUV, AWUV, RGBA, RGBW, RGBUV, RGAW,
RGAUV, RGWUV, RBAW, RBAUV, RBWUV, RAWUV, GBAW, GBAUV, GBWUV, GAWUV,
BAWUV, RGBAW, RGBAUV, RGBWUV, RGAWUV, RBAWUV, GBAWUV, or RGBAWUV.
Colour Temperature
To select a preset colour temperature:
- Go to the Static main level.
- Select the Color Temperature option.
- Select the color temperature, from Warm White 1, Warm White 2, Warm White 3, Neutral
White 1, Neutral White 2, Neutral White 3, Daylight 1, Daylight 2, Daylight 3, or Daylight 4.
Manual Color Mixer
To manually mix a custom static color:
- Go to the Static main level.
- Select the Manual Color Mixer option.
- Select the color value to alter, from Red, Green, Blue, Amber, White, or UV.
- Set the value of the selected color, from 000–255.
Auto Show
To select an automatic program:
- Go to the Auto show main level.
- Select the program, from Auto 1–5.
- Set the program speed, from 001–100.
Configuration (Settings)
Master/Slave
The Master/Slave mode allows a group of COLORdash Par H7X products (the
slaves) to simultaneously duplicate the output of another COLORdash Par H7X
(the master) without a DMX controller.
To set each of the slaves:
- Go to the Master/Slave main level
- Select Slave.
To set the master
- Go to the Master/Slave main level
- Select Master.
- Select a standalone setting.
- The master is the one that runs a program whether in Auto or Static mode.
- Do not connect a DMX controller to the products configured for Master/Slave operation. The
- DMX controller may interfere with signals from the master.
- The master should be the first product in the daisy chain.
Dimmer Speed
This setting determines how fast the output of the COLORdash Par H7X changes
when the output value is modified. It provides four different options to
simulate the dimming curve of an incandescent lighting product. To select a
specific dimmer profile, do the following:
- Go to the Dimmer Speed main level.
- Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
- Off: The output is proportional (linear) to the dimmer channel value.
- Dimmer 1–3: The output follows the dimmer value based on the corresponding dimmer curve,
- Dimmer 1 being the fastest.
White Balance
This setting determines the maximum output values for each color, which
affects the appearance of the total color output.
- Go to the White Balance main level.
- Select from Off (uses factory default white setting) or Manual (uses a custom white balance).
- Select the color value to alter, from Red, Green, Blue, Amber, White, or UV.
- Set the maximum value of the selected color, from 125–255.
LED Frequency
To adjust the frequency of the pulse width modulation:
- Go to the LED Frequency main level.
- Select the frequency, from 600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25kHz.
Back Light
To set how long before an inactive display will turn off:
- Go to the Back Light main level.
- Select the length of the backlight timer, from 10S (10 seconds), 30S (30 seconds), 2Min (2 minutes), or Always On.
Key Lock
To lock the display with a passcode:
- Go to the Key Lock main level.
- Select On (lock the display) or Off (unlock the display).
Information
To view essential product information:
- Go to the Information main level.
- Select Fixture Hours, Version, or UID.
Factory Reset
To reset the product to factory settings:
- Go to the Reset Factory main level.
- Select NO (to cancel) or YES (to reset the product configuration).
System Update
To update the firmware with a USB to DMX adapter cable:
- Go to the System Update main level.
- Follow the instructions (Put the update file into the USB stick and connect it to the device through an adapter cable).
- Select NO (to cancel) or YES (to update the firmware).
Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This
can lead to reduction of the light source’s life and/or mechanical wear. To
maintain optimum performance and minimize wear, clean your lighting products
at least twice a month. However, be aware that usage and environmental
conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
- Unplug the product from power.
- Wait until the product is at room temperature.
- Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
- Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
- Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
- Softly drag any dirt or grime to the outside of the transparent surface.
- Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Technical Specifications
Dimensions and Weight
Contact Us
General Information Technical Support Chauvet World Headquarters
- Address: 3360 Davie Rd
- Davie, FL 33314
- Voice: 954-577-4455
- Fax: 954-929-5560
- Toll Free: 800-762-1084
- Voice: 844-393-7575
- Fax: 954-756-8015
- Email: chauvetcs@chauvetlighting.com
- Website: www.chauvetprofessional.com
Chauvet U.K.
- Address: Unit 1C
- Brookhill Road Industrial Estate
- Pinxton, Nottingham, UK
- NG16 6NT
- Voice: +44 (0) 1773 511115
- Fax: +44 (0) 1773 511110
- Email: UKtech@chauvetlighting.eu
- Website: www.chauvetprofessional.eu
Chauvet Benelux
- Address: Stokstraat 18
- 9770 Kruishoutem
- Belgium
- Voice: +32 9 388 93 97
- Email: BNLtech@chauvetlighting.eu
- Website: www.chauvetprofessional.eu
Chauvet Germany
- Address: Bruno-Bürgel-Str. 11
- 28759 Bremen
- Germany
- Voice: +49 421 62 60 20
- Email: DEtech@chauvetlighting.de
- Website: www.chauvetprofessional.eu
Chauvet Mexico
- Address: Av. de las Partidas 34 – 3B
- (Entrance by Calle 2)
- Zona Industrial Lerma
- Lerma, Edo. de México, CP 52000
- Voice: +52 728-690-2010
- Email: servicio@chauvet.com.mx
- Website: www.chauvetprofessional.mx
Warranty & Returns
- For warranty terms and conditions and return information, please visit our website.
- For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
- For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
- France, and Germany: www.chauvetlighting.eu/warranty-registration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>