Moes ZT-SY-SR Smart Button User Manual

June 16, 2024
MOES

Moes-logo

Moes ZT-SY-SR Smart Button

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Dimensions

Moes-ZT-SY-SR-Smart-Button-fig-1

Specifications

  • Power Supply: Battery CR2032, 3 V, DC
  • Communication: ZigBee 3.0 or low-energy Bluetooth (depends on the selected model)
  • Operating Distance: 50 meters in an open area
  • Degree of Protection: IP55
  • Dimensions: 45 × 45 × 12,5 millimeters
  • Operating Temperature: -10 – 45 °C
  • Operating Humidity: < 90 % RH
  • Battery Lifespan: 1 year (general use)

Battery Installation

  1. Remove the screw and the cover.
  2. Install the CR2032 battery.
  3. Install the cover.

Connecting to the Network

  • To download the app, simply scan the provided QR code. Please note that a gateway is required for connection.

Reset and Paring

  1. Remove the screw and the cover.
  2. Hold “RESET” for 6 seconds.
  3. LED will start flashing.
  4. Reinstall the cover

Remote Mode

Moes-ZT-SY-SR-Smart-Button-fig-10

Description of Controls in Remote Mode

Moes-ZT-SY-SR-Smart-Button-fig-12

Note: The functionalities mentioned above may vary based on the smart bulb model.

Switching between Remote and Scenario Modes

Moes-ZT-SY-SR-Smart-Button-fig-13

Scenario Mode

Moes-ZT-SY-SR-Smart-Button-fig-14

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

  • This equipment complies with the essential requirements and other relevant provisions of EU directives.

WEEE
This product must not be disposed of as normal household waste under the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines under national regulations.

CONTACT

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals