Voyetra Turtle Beach 5012L Scout Air Case Wireless Earbuds User Guide
- June 6, 2024
- Voyetra Turtle Beach
Table of Contents
QUICKSTART GUIDE
SCOUT
AIR
IMPORTANT READ BEFORE USING
https://support.turtlebeach.com/hc/en-us
Any questions?
Model: Scout Air™ Buds & Scout Air™ Case
SCOUT AIRTM TRUE WIRELESS BLUETOOTH® EARBUDS FOR BLUETOOTH® EQUIPPED MOBILE DEVICES, PC & MAC.
CUSTOMIZE
Download the companion mobile app to customize the Scout Air'” buds to your liking. Adjust and create EQs, remap the touch-enabled functions, and update your firmware as needed without having to wire in.
CONTENTS
A. Scout Air™ Left/Right Ear Buds
B. Charging Case
C. Ear Tips
Small/ Medium/ Large
D. USB-C Charging Cable
The Scout Air’ gives you 20 total hours of rechargeable battery life. Make sure to charge it regularly by connecting the case to a USB source with the case lid dosed before storing.
CONNECT
To connect to your smartphone or another Bluetooth® device, follow the steps below:
- Turn on Ellueloothe on your device.
- Open the case with the earbuds inside to initiate pairing.
- Select Scout Air” from your device’s Bluetooth° list.
LED BEHAVIORS
AU these Actions are performed using the Touch-Enabled Surface on the earbuds.
FUNCTIONS
EAR BUDS LED | MEANING |
---|---|
Fast- Blinking White | Pairing Activated |
Solid White
Turns off after pairing successfully| Pairing Successful
ACTION | FUNCTION |
---|---|
Single Tap | Answer/End Calls OR Play/Pause Track |
Double Tap | Skip Forward |
Triple Tap | Skip Back |
Press and Hold 2 for Seconds | Activate Your Device Smart Assistant |
3 Short Taps + 1 Long Tap | Activate/ Deactivate Game Mode |
CHARGING CASE LED | MEANING |
---|
Solid White
Turns off when the case is open after 5 seconds. Turns off when the case is
closed for 5 seconds.| Battery Level Indication:
3 Lars—Full Battery 2 LED’s-50% Battery 1 LED—Low Battery I
To change the earbud tips, pull firmly to remove them.
Choose the earbud tip that best fits, align with the earbud, and stretch around the grill.
Regulatory Compliance Statements for Scout AirTM WIRELESS Ear Buds &
Scout Air”‘ Case
Local Restrictions on Radio Usage
Cautions: Due to the fact that the frequencies used by wireless devices
may not yet be harmonized in all countries, these radio products are designed
for use only in specific countries, and are not allowed to be operated in
countries other than those of designated use. As a user of these products, you
are responsible for ensuring that the products are used only in the countries
for which they were intended and for verifying that they are configured with
the correct selection of frequency and channel for the country of use. Any
deviation from the permissible power and frequency settings for the country of
use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a
specific country, please check to see if the radio type number that is printed
on the identification label of your device is listed in the manufacturer’s OEM
Regulatory Guidance document at the following URL
http://www.turtlebeach.com/homologation or contact Turtle Beach directly.
Federal Communications Commission (FCC) Compliance Notices
This section includes the following FCC statements for the Scout Air” and
Scout Air-Case:
- FCC ID: XGB-5012L & XGB-5012R (Scout Air” Buds!
- Class B Interference Statement
- Non-Modification Statement
- RF Radiation Exposure & Hazard Warning
Cautions: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. The limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and. if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment doesn’t cause harmful interference to radio or
television reception, which can be diminished by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Cautions
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (11 This device may not cause harmful
interference, and (21 this device must accept any interference received,
including interference that may cause undesired operation.
RF Radiation Exposure & Hazard Statements
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End-users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
Non-Notification Statement
Use only the supplied Internal antenna. Unauthorized antennas, modifications,
or attachments could damage the Scout Air” Buds Models and violate FCC
regulations. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. Please contact Turtle Beach for a list of approved 2A GHz antennas.
Innovation Science and Economic Development Canada (ISED) Compliance
Notices
This section includes the following ISED statements for Scout Air™
- IC: 3879A-5012L [Scout Air); IC: 3879A-50(SYN Buds Air)
- Class 13 Interference Statement
- RF Radiation Exposure & Hazard Warning
Canadian ICES Statements
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF Radiation Exposure & Hazard Statement
The product complies with Canada portable RF exposure limits set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
European Union and European Fair Trade Association (EFTA) Regulatory
Compliance
This equipment may be operated in the countries that comprise the member
countries of the European Union and the European Fair Trade Association. These
countries. listed below, are referred to as The European Community throughout
this document: AUSTRIA. BELGIUM. BULGARIA. CYPRUS. CZECH REPUBLIC. DENMARK.
ESTONIA. FINLAND. FRANCE. GERMANY. GREECE. HUNGARY. IRELAND. ITALY. LATVIA.
LITHUANIA. LUXEMBOURG. MALTA, NETHERLANDS, POLAND. PORTUGAL. ROMANIA,
SLOVAKIA. SLOVENIA. SPAIN. SWEDEN, UNITED KINGDOM. ICELAND. LICHTENSTEIN.
NORWAY. SWITZERLAND.
Declaration of Conformity
Marking by this symbol: Indicates compliance with the Essential Requirements
of the Radio Equipment Directive (RED) of the European Union (2014/53/EU).
This equipment meets the following conformance standards:
Safely:| EN 62368-1: 2014 IT-Mark License), IEC 62368-1: 2014 ICB Scheme
certificate, EN 50332-1: 2013. EN 50332-2: 2013 Additional licenses issued for
specific countries available on request.
---|---
EMC:| EN 55032: 2015, CISPR 32: 2015 EN 55035: 2017, CISPR 35:2016 EN 301
489-1 V2.2.3 EN 301 489-17 V3.1.1
Radio.| EN 300 328 V2.2.1
EMC:| EN 62479: 2010
The products are licensed, as required, for additional country-specific standards for the International Marketplace. Additional issued licenses are available upon request.
Environmental:| REACH 2006/1907/EC. RoHS 2015/863 amending Annex II to Directive 2011/65/EU, WEEE 2012/19/EU, Packaging 94/62/EC. Battery 2006/66/EC
Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeach.com/homotogatton
This symbol on the product or its packaging indicates that this product must
not be disposed of with your other household waste. Instead. it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste for
recycling, please contact your local authority, or where you purchased your
product.
Turtle Beach Europe Ltd is obligated as a producer with a main activity of
selling under The Producer Responsibility Obligations (Packaging Waste
Regulations 2007. To fulfill our obligation we are registered with Comply
Direct and their Recycling Room. Here you will find advice and information on
packaging waste management, recycling symbols, and the waste hierarchy
principles of reducing, reuse and recycling. https://www.complydirect.com
/the-recycling-room/
PKG DESIGN DEPT
Designer: Taylor Swanson
Products: Scout Air (Air Pearl)
Project: QSG
Dates: JUN /9/ 21
Scale: 100%
COMMENTS
Please do not print this layer!!!
- 100% actual site
- Rotor to video on how to fold
SPECIFICATIONS
Printing information
BLK + WHT
QSG Paper Weight (80g) Foldout
Folding Line
CHANGES
Orig Arena#: 426-213-001-005
New Arena#: 426-213-001-005-R01
Date / Initiator: 06-09-20/ Marking Initiative 1. MP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>