Pet Stain Eraser PowerBrush First Use Guide & Charging light indication | Support
- June 7, 2024
- Bissell
Table of Contents
Charging:
- Upon removing your machine from the box, insert charger
- For maximum run time, charge machine for 4.5 hours prior to use
- Note: It could take up to 2 hours for machine to go from 1 to 2 battery lights while charging
| Battery Light Indication | Battery Charge Percentage | |
|---|---|---|
| No Battery Lights | Machine is powered off/ Machine is fully charged if |
plugged in
| One Battery Light Breathing| 1%-14% charged
|
One Battery Light Solid, One
Breathing Battery Light
| 15%-69% charged
| Two Solid Battery Lights, One Breathing Battery Light| 70%-90%
charged
| Three Solid Battery Lights| Fully Charged
| One Battery Light Blinking| Battery Below 15% > Plug in to Charge
Formula Tank:
- Open Formula Tank Cap and fill with Formula to the Formula dot
- Close Formula Tank Cap until it clicks and is securely closed
Cleaning:
-
Turn Machine on
- Brush Roll will automatically start spinning, to turn Brush Roll off hit the Brush Roll button
-
Spray Formula in desired area using the Spray Button
-
Scrub the area with the rotating PowerBrush
- Keep the nose of the machine flat on the surface
-
For best suction, tilt the machine slightly forward and pull backwards while firmly pressing the suction channel to the cleaning area
-
Make sure to empy the Dirty Tank when it reaches the MAX FULL line
- For instructions on Emptying the Dirty Water Tank > Go to After Cleaning Care
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>