Homerunpet PD 10 Ultra Quiet Grooming Hair Dryer

WALEED POST

PD 10 Ultra Quiet Grooming Hair Dryer

Product Information

Specifications

• Product Name: Pet Blow Dryer
• Model: PD 10

Device Overview

The Pet Blow Dryer (Model PD 10) is a powerful and efficient
tool for drying and styling your pet’s hair. It comes with various
nozzles for different drying needs and features adjustable wind
speed and temperature settings. The device is designed to provide
gentle and safe drying, preventing discomfort or harm to your
pet.

Nozzles

The Pet Blow Dryer includes three different nozzles:

• High-speed narrow nozzle: This nozzle is ideal
  for fast drying and can effectively remove moisture from a pet’s
  body, even for those with long, thick, and dense hair. It can also
  help in styling the fur for a well-groomed appearance.

• Elbow nozzle: The elbow nozzle uses the
  ‘Coanda Effect’ to protect your pet’s skin from direct exposure to
  hot air, preventing scalding. It ensures gentle drying while still
  providing efficient drying results.

• Ultra-wide nozzle: The ultra-wide nozzle has a
  100mm air outlet that delivers powerful airflow, making it suitable
  for whole-body drying. It can effectively dry even the thickest and
  most dense coat on your pet’s entire body.

Note: For pets that are sensitive to noise and winds, the device
can be used without a nozzle, providing gentle drying with
adjustable wind speed. This setting is ideal for drying the ears
and cheeks of pets.

Installation

1. Attach the hose to the device securely.
2. Select the desired nozzle based on your drying needs.
3. Attach the chosen nozzle to the end of the hose.

User Guide

1. Connect the power to the device.

2. Adjust the wind speed using the wind speed setting knob. Twist
   clockwise to accelerate and counter-clockwise to slow down. For
   quick adjustment, twist the knob rapidly.

3. Adjust the temperature using the heating button. Press
   repeatedly to cycle between warm air mode, hot air mode, and
   heating off.

4. Turn on the device.

5. Select the appropriate nozzle for your drying needs.

6. Start blow-drying your pet’s hair.

7. Press the pause button to pause the device. While paused, you
   can adjust the wind speed or heating settings as needed. Press
   again to restart the device.

8. Long-press the power button to turn off the device.

9. Unplug the power from the device.

10. After use, arrange the nozzles and components properly for
    storage.

Cleaning

To clean the Pet Blow Dryer, ensure that it is unplugged and
turned off. Use a soft, damp cloth to wipe the exterior surface of
the device. Do not use any abrasive materials or harsh chemicals,
as they may damage the device.

Troubleshooting

If you encounter any issues with the Pet Blow Dryer, refer to
the troubleshooting section in the user manual or contact our
customer support for assistance.

Warranty

The Pet Blow Dryer comes with a warranty. Please refer to the
warranty section in the user manual for more information.

FAQ

Q: Can I use the device without a nozzle?

A: Yes, the device can be used without a nozzle for gentle
drying with adjustable wind speed. This setting is ideal for drying
the ears and cheeks of pets.

Q: How do I adjust the wind speed and temperature?

A: The wind speed can be adjusted using the wind speed setting
knob. Twist it clockwise to accelerate and counter-clockwise to
slow down. The temperature can be adjusted using the heating
button. Press repeatedly to cycle between warm air mode, hot air
mode, and heating off.

Q: How should I clean the Pet Blow Dryer?

A: To clean the device, ensure it is unplugged and turned off.
Use a soft, damp cloth to wipe the exterior surface. Avoid using
abrasive materials or harsh chemicals, as they may damage the
device.

Pet Blow Dryer
PD 10

User Guide

ENGLISH DEUTSCH FRANÇAIS

Read this user guide carefully and keep it safe for future use!

Contents

SAFETY INSTRUCTIONS

2

01 Package Contents

5

02 Device Overview

6

03 Nozzles

7

04 Installation

8

05 User Guide

9

06 Knob Display Screen

11

07 Cleaning

12

08 Troubleshooting

13

09

15

10 Warranty

15

1

SAFETY INSTRUCTIONS
IMPORTANT NOTES Please read the user guidance carefully before using the product and keep it in a safe place. Failure to comply with this manual and safety tips can lead to product damage, personal injury or property damage. When using it, be sure to comply with the safety tips, including: · Apply rated voltage and rated frequency that meet the requirements of the equipment; ·
high temperature environments to prevent accidents; ·
use to avoid the accumulation of grease and other residues; · ·
inlet; ·
outage, please turn it off and then pull the plug out of the socket; · Protect the device from falling down or being stricken with strong force; · · Please check the power cord regularly. If the plug, power cord, or blow dryer is damaged, do not
use it any more; · This blow dryer is not recommended for use by individuals with physical disabilities, delayed
reactions, children, or those with mental disorders unless there is a guardian present to supervise and guide the use of the device, and assume responsibility for the safety of the user; · Do not place the device in an area accessible to children, and ensure that children do not play with the device; · Do not use diluent, benzene or other solvents to clean the water blower; · If you encounter any problems, please consult the troubleshooting table in the manual and avoid attempting to disassemble the device yourself; · Keep the device away from water sources and do not expose it to moisture. Do not use this device outdoors or on wet ground; · For protection purposes, it is recommended to install a residual current device (RCD) with rated residual working current no more than 30mA in the bathroom. Consult the RCD installer; · If the power cord is damaged, it must be replaced by a designated professional from the manufacturer or the maintenance department; · When using the device in the bathroom, it is important to unplug it after use. Even when the device is powered off, it can still pose a danger when it is near water; · · Do not use the device near bathtubs, washbasins, or other objects that hold water.
The device, its accessories, and packaging should be disposed of in accordance with local and national regulations.
2

NOTES · Before using it, please check whether the power cord is peeling off or damaged. If peeling off,
please stop using it immediately; · Do not use this product in excessively damp environments or in water to prevent electrical leakage; · Do not touch or unplug the power plug with wet hands to prevent electric shock; ·
device from tipping; · Before using, tighten the hose at each joint to prevent air leakage, which can affect the
performance of the device; · Before using, please hold the hose handle, and then adjust the wind speed setting to prevent the
nozzle from shaking; · Due to the high wind speed, do not point the nozzle towards people or objects to prevent discomfort
or potential danger; · Please set the wind speed to zero after use, and then carefully place the nozzle and hose down
until the dryer stops blowing; · To prevent the motor from overheating and burning out, please make sure not to block the air outlet
or inlet; · · The main unit of the device should not be washed or exposed to direct sunlight. After disconnecting
the power cord, it can be wiped with a dry cloth; · Please use the air-drying feature for pets only under the supervision of their owners; · When drying your pet, it is important to lower the temperature and wind speed if they appear
uncomfortable. If the signs of discomfort persist, please stop using the device immediately.
DAILY MAINTENANCE · Do NOT turn on the power supply for an extended period of time when the device is not in use; · · Please clean the nozzle, hose, hose connector and power cord regularly and check their conditions; · Please disconnect the power supply and wipe the water stains on the surface with a dry cloth after
using; · Please properly store the hose, hose connector, nozzle, and power cord after use; · Please store the device in a cool and dry place after use.
3

For customers in the U.S.A.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
responsible for compliance could void the user’s authority to operate the equipment.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
4

01 Package Contents
5 4

3

Number
1 2 3 4 5

Item
Hose Nozzle x3 User Guide Quick Start Guide

5

1 2

02 Device Overview

D

C

F

E

G

H

B A

M L K

J P
O R

I
N Q

A

Blow Dryer

B

Handle

C

ON / OFF / Pause

D

Heating button

E

Wind speed setting knob

F

Negative ion indicator

G

Heating indicator

H Wind speed setting indicator

I

Hose

J

Hose handle

K

Ultra-wide nozzle

L

High-speed narrow nozzle

M

Elbow nozzle

N

O

P

Q

R

6

03 Nozzles

High-speed narrow nozzle Fast drying This high-speed narrow nozzle produces a strong and away moisture from a pet’s body, even when they have long, thick, and dense hair. Additionally, it can help to style the fur for a well-groomed appearance.
Elbow nozzle Gentle drying The elbow nozzle with ‘Coanda Effect’ protects your pet’s skin from direct exposure to hot air and prevents scalding,
Ultra-wide nozzle Whole-body drying The 100mm ultra-wide air outlet delivers powerful and and dense coat on your pet’s entire body.

Note: For pets that are sensitive to noise and winds, the device can be used without nozzle to provide gentle drying with adjustable wind speed. It is ideal for drying the ears and cheeks of pets.
7

04 Installation
1 Install hose

2 1

2 Choose nozzle

3 Install nozzle
8

05 User Guide

1

2

Blinking light

Connect the power.

Adjust the wind speed (Preset). To accelerate, twist the knob clockwise. To slow down, twist it counter-clockwise.
*Fast adjustment is supported: Quickly twist the knob.

3
“di”

4

Warm air

“di” Grip the handle

Hot air
Heating off
Adjust the temperature (Preset). Two modes are available. *Press repeatedly to cycle between warm air mode, hot air mode and heating off.

Turn on the device.

9

5
Blow dry pet hair. Select the nozzle that suits your needs.
7

6 1
“di”

Blinking light

2
Pause the device. *When the device is in pause state, you can adjust the wind speed or heating settings as needed. Press to restart the device.
8

Long press to turn off the device.

Unplug the power. Arrange the nozzles and components after use.
10

06 Knob Display Screen

Negative ion indicator

Wind speed setting indicator 01~99 level
Heating indicator Orange: Warm air mode Red: Hot air mode White: Heating off

Device status Power on

Knob display status

Pause
Increase/Decrease wind speed

ion indicator will be off. The current wind speed setting will be displayed, with a range from 01 to 99 settings.

Switch to warm air mode The yellow indicator light will turn on.

Switch to hot air mode The red indicator light will turn on.

Switch off heating

The white indicator light will turn on.

*Negative ion feature automatically turns on when the blow drying starts and turns off when the blow drying stops.

11

07 Cleaning

1

2

¸R ¸O

Disconnect the power supply, and remove the

Unlock the rear filter cover. R: Internal foam filter O: Rear filter cover

3

4

¸Q ¸P

Remove the internal filter holder. Q: External foam filter P: Internal filter holder

Flush the parts.

To ensure the health of your pets, it is recommended to regularly clean the filter parts and blow drying parts. Disconnect the power supply before cleaning. Do NOT wash the main unit with water. Instead, wipe it with a cloth. To prevent electric shock or damage to the device, it is recommended to dry the filter parts and foam filters in a cool place before installation.
12

08 Troubleshooting

Trouble
Device not responding

Troubleshooting steps
· Unplug the device. Reconnect it to power and restart in 10s; · Check whether the socket is powered; · Check if there is any damage in the power plug and power cord;

Unable to adjust wind speed

· Unplug the device. Reconnect it to power and restart in 10s; · Check if you have turned on the device by pressing the On / Off
button; · Check if you have adjusted the wind speed by turning the setting
button counter-clockwise;

No air coming out · Unplug the device. Reconnect it to power and restart in 10s;

after the device is · Check if you have adjusted the wind speed or turned on the blow dryer;

turned on

· Check for blockage in the air outlet andnozzle;

No hot air coming · No hot air coming out;

out

· Check if you have adjusted the heating setting;

Low wind speed

· Unplug the device. Reconnect it to power and restart in 10s; · Increase the wind speed; · · Check for excessive air leakage in the hose, hose connector, or nozzle
connector;

Low outlet air temperature

· Unplug the device. Reconnect it to power and restart in 10s; · Increase the heating setting; · Check if the temperature is too low; · Check if the voltage is to low;

Trouble code E1 or E2

· Unplug the device. Reconnect it to power and restart in 10s;

Excessive air leakage
or unusual sound

· Check if both ends of the hose are tightened; · Check for damage in hose, hose connector, or nozzle connector; · Check if the nozzle connector and the device outlet connector are
installed according to the markings.
· · Check if any foreign objects have been sucked into the device; · Check if the air inlet and outlet are blocked;

Note: In the case where the above troubleshooting does not resolve your issue, please contact our Customer Support for help.

13

• Customer Support by Regions
  United States Monday – Friday, 9AM – 5PM (CST)
  +1-888-509-3676 contact@homerunpet.com Homerunpet
  Japan (Supported by local agency) Monday – Friday, 10AM – 6PM (GMT+9)
  @homerunpet_jp +81-03-5213-4641 support.japan@homerunpet.com Homerunpet Japan
  Taiwan, Hong Kong and Macao of China (Supported by local agency) Monday – Friday, 9AM – 6PM (GMT+8
  @homerunpet_tw +886-04-2233-7060 hi@ihomerunpet.com Taiwan
  Other Countries and Regions contact@homerunpet.com Homerunpet
  14

09
Homerunpet Pet Blow Dryer
Rated Voltage: 120V~ Rated Frequency: 60 Hz
Net Weight: 4.8kg Gross Weight: 6.2kg Product Size: 340×180×245mm
Color: White Suitable For: Cat, Dog
10 Warranty
Thank you for choosing Homerunpet Pet Blow Dryer. Please read the instructions below carefully before using: Homerunpet offers a one-year warranty from the date of original purchase and Homerunpet and repaired parts can be warranted given that they are valid and unexpired according to the original warranty. This warranty applies only under the circumstance of normal operation that the appliance is intended to. Any damage caused by negligence, accident, misuse or any other reasons beyond Homerunpet’s reasonable control including but not limited to: failure to follow the product instructions or service manual, maintenance that is undue or not in a timely manner, connection to improper power covered by this warranty. Any maintenance must be implemented as per the product instructions herein. For after-sales service and more information, please contact: contact@homerunpet.com.

15

0140100352_A00

Designed and Manufactured By: Shenzhen Qianhai Homerun Smart Technology Co., Ltd. Gang Wan Du Hui Building, No. 167 Gang Wan Road, Huangpu District, Guangzhou, China
MADE IN CHINA
MORE INFORMATION HOMERUNPET.COM

References

• Homerunpet Pet Supplies - Better Care & Easier Life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>