Homerunpet TB-10 Smart Cat Ball Sensor User Guide
- June 13, 2024
- Homerunpet
Table of Contents
Smart Cat Ball
User Guide
Parts
- Button
- Upper Cover
- Battery Box Cover
- Bell
- AAA Battery FR
The Installation of Battery
Please push the battery box cover in the direction of the arrow to install the battery.
Warning:
- Please use alkaline or rechargeable batteries, do not use carbon batteries.
- Please install the battery according to the correct polarities, use/ replace and charge the battery ( if charging is acceptable) under adult supervision.
- Do not mix old together with new batteries.
- Do not charge non-rechargeable batteries.
- Do not use different kinds or brands of batteries at the same time.
- Remove the battery if the ball is not used for a long period.
Instructions:
Instruction for use
Short press the button: to power on/off (together).
Long press the button: long press for about two seconds to switch the mode
from red light to flash or from flash to red light.
Working Mode
-
Normal mode: (Red light is on)
After rolling for 8 minutes, the ball will stop and turn itself off automatically. -
Smart mode: (Red light is flashing)
If the ball is not rolled for a while, it will enter standby mode.
Whenmovement is detected again, the ball will continue to roll.
Product Specification
Model | Dimensions | Net Weight | Operating Temperature |
---|---|---|---|
TB 10 | 72X72X72mm | 120g | 0-40℃ |
Package List
NO. | Description | Quantity | Remarks |
---|---|---|---|
1 | Smart Cat Ball | 1 | |
2 | Bell | 1 | |
3 | AAA Battery | 2 | |
4 | Warranty Card | 1 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>