Homerunpet PF20 Smart Automatic Cat Feeder User Guide
- June 15, 2024
- Homerunpet
Table of Contents
Smart Pet Feeder
PF20
User Guide
SAFETY INSTRUCTIONS
PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS BEFORE USE.
- This appliance may be used by children aged 8 or above, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting hazards.
- Children must not play with the appliance.
- Children must not perform cleaning or maintenance unless they are at least 15 years old and supervised.
- Keep children under the age of 8 years away from the appliance and power supply.
- When the appliance is working, do NOT put your hand/finger or other object into the food outlet or the food tank.
- Set up the appliance on an even, stable, clean, non-slip, dry and fireproof surface in a spacious space.
- Do NOT install the appliance in a confined space, such as bookcase or built-in cabinet.
- Do NOT set up the appliance in the immediate vicinity of the heat source.
- To avoid possible electrical shock, this appliance is FOR INDOOR HOUSEHOLD USE ONLY.
- Do NOT place the appliance OUTDOORS or on WET ground, nor allow the appliance to be put in water or other liquids.
- To prevent possible fire or electrical shock, do NOT place vessels filled with liquids, such as vases, on the appliance.
- Disconnect the power supply before cleaning. maintenance. and transportation of the unit.
- Do NOT touch the appliance power supply unit with wet hands.
- Do NOT immerse the feeder base or lid into the water under any circumstances as it may damage the electronic parts inside.
- The appliance must only be operated with the original power supply unit.
- Do NOT use damaged power supply unit. In case of any damage, contact your supplier for replacement immediately.
- Do NOT use an extension cord or modified adapter.
- Do NOT drag the power cord when unplugging the adapter.
- The appliance must only be used and maintained as described in this user guide.
- Be careful when moving the appliance to avoid damage and crashing into other objects. In case of any damage, deformation or corrosion, stop using it immediately.
- The appliance must be used only in a technically perfect condition.
- Do NOT disassemble and modify the appliance in any form.
- Do NOT use batteries that are leaking, deformed, or discolored.
- Do NOT mix old and new batteries or batteries of different types.
- If the appliance will NOT be used for long time, remove the batteries and disconnect the power. Meanwhile. empty and clean the food tank.
- If the batteries leak, clean the battery compartment thoroughly before inserting new batteries.
- Be sure to provide this appliance with the rated low voltage that meets its requirements.
The appliance, batteries, accessories and packaging must be disposed of according to local and national regulations.
For customers in the U.S.A.
FCC statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
FCC radiation exposure statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20 cm
between the radiator & your body.
Delivery Note
Number | Item |
---|---|
1 | Food tank |
2 | Feeder base |
3 | Bowl base |
4 | Feeder bowl |
5 | Desiccant |
6 | A/C adapter |
7 | USB cable |
8 | User guide |
9 | Feeder bowl clips |
Appliance Overview
A Food lid
B Open button
C Battery indicators
D Manual feed button
E Status indicator
F Food outlet
G Lid snap
H Food tank
I Food tank latch
J Feeder base
K Feeder bowl
L Bowl base
M Reset button
N Power switch
O A/C adapter socket
P Battery compartment
Q Desiccant box
R Desiccant box switch
S Impeller
T Spring shaft
U Silicone sleeve
V Food impeller
W Food impeller cover
Note: Design is subject to change without prior notice!
Dual Power Supply
The appliance can be powered by power adapter or batteries. The batteries automatically supply power to the appliance in the event of a power interruption.
- Insert the batteries
- Connect to power 1. Open the battery compartment and insert four
1. Connect the appliance to power supply. LR 20 (size D) alkaline batteries with correct polarity
2. Turn on the appliance. as illustrated above!
Note: The LR 20 (size D) batteries are not included with the appliance. Remote feeding function is not available when the appliance is powered by battery only.
Filling food
Open the lid
Insert the desiccant. Note: For better pet food preservation, replace the desiccant every 4 weeks.
Add dry kibble food. The maximum kibble size should be no larger than 12 mm.
Pay attention to the maximum food level!
Remote feeding
- Search and download Homerunpet APP in APP Store or Google Play.
- Sign up and log in to your account.
- Add and connect the appliance to your phone as per the pop-up instructions before you start customizing the feeding plan.
Manual feeding
By double clicking the manual feed button, one portion of food will be dispensed. For more food, repeat the same.
Indicator and satus
LED Indicator | Indicator Status | Appliance Status |
---|---|---|
Appliance status indicator (E) | LED indicator flashes in red | Not enough food |
LED indicator lights in white | Normal status | |
LED indicator flashes in blue | Waiting for connection | |
level indicators cators (C) | All 4 battery indicator lights on | Full power |
The bottom battery indicator flashes | Low power (Batteries should be |
replaced).
Cleaning
Disconnect power supply!
Disassemble the lid: Press the lid snap button and lift the top cover upwards.
Disassemble the food tank. Note: Please swipe the latches (I) on both sides to unlock the tank!
Turn over the food tank
Disassemble the impeller cover (W)
Press the spring shaft (T)
Take out the impellers (S)
Take apart the silicone case (U) from the
impeller (V)
Note: To better promote your pet pal’s wellbeing, it is recommended to
clean the appliance every 4 weeks.
Wipe the feeder base and lid.
Note: They are not washable!
Washable parts.
Note: Do NOT wash with dishwasher.
Assembly
Note: Do NOT assemble the appliance until all parts are thoroughly dry!
Assemble the silicone case (U) to the impeller (V)
Assemble the impellers (S)
Press the spring shaft (T)
Assemble the impeller cover (W)
Assemble the food tank. Note: Please swipe the latches (I) on both sides to the lock position!
Assemble the food lid
Tips on assembling the feeder bowl clip.
Please place the clip at the joint
position between the feeder and bowl base.
- Assembly: Press the clip downward to fasten it to the buckle.
- Disassembly: Pinch both sides of the clip and pull it up.
Product Specifications
Homerunpet Smart Pet Feeder
Model: PF20
Volume: 4.0 L
Product size: 328 x 185 x 353 mm
Material: ABS
Weight: 2.01 kg (4.4 lbs)
Power supply: 5V === 2A
Wireless frequency: WiFi 2.4 G
Suitable for: Cats or small dogs
Warranty
Thank you for choosing Homerunpet Smart Pet Feeder. Please read the instructions below carefully before using: Homerunpet offers a one-year warranty from the date of original purchase and Homerunpet requires presentation of the original proof of purchase to confirm the date. Product replacements and repaired parts can be warranted given that they are valid and unexpired according to the original warranty. This warranty applies only under the circumstance of normal operation that the appliance is intended to. Any damage caused by negligence, accident, misuse or any other reasons beyond Homerunpet’s reasonable control including but not limited to: failure to follow the product instructions or service manual, maintenance that is undue or not in a timely manner, connection to improper power supply, unauthorized product modification, fire, lightning, flood or other force majeure matters, is not covered by this warranty. Any maintenance must be implemented as per the product instructions herein. The motor is factory sealed, and any modification will invalidate this warranty immediately. For after-sales service and more information, please contact: support@homerunpet.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>