Q-TRAN FL3SC Linear Fixtures Surface Owner’s Manual

Q-TRAN FL3SC Linear Fixtures Surface

Introduction

• Encapsulated with polyurethane for indoor and outdoor locations (IK10)
• Perfect for recess mounted installations
• Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments
• Delivers superior uniform light output and luminosity
• Q-Tran Red & Amber LED products are Florida Fish and Wildlife Conservation Commission certified, making them safe for turtles and other wildlife

1
PRODUCT

|

2
WATTS/ FT

|

3
CCT

|

4
RATED

|

5
EFFICIENCY

|

6
LENS

|

7
WIRE INPUT/ OUTPUT

|

8
CONNECTOR/ WIRE IN

|

9
CONNECTOR/ WIRE OUT

|

10
INPUT END CAP

|

11
OUTPUT END CAP

|

12
WIRE COLOR

|

13
WIRE TYPE

|

14
MOUNTING

|

15
FINISH

|

16 LENGTH (IN)

| 17
EXACT/OPTIMAL
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
FL3SC| 5.0| | ENC| | | | | | STD| STD| | | SST| | |

1. PRODUCT FL3SC
   See last page for compatible power supplies

2. WATTS/FT
   5.0 5.0W/ft

3. CCT
   

   • A Amber
     

   • B Blue
     

   • G Green
     

   • R Red

4. RATED
   ENC IP67

5. EFFICIENCY
   STD Standard
   WO White Optics
   White Optics – Internal coating, greater lumen output

6. LENS

   • CL Clear
   • TL Translucent
     For representation of LED visibility, see Diode Visibility section on following pages.
     For beam angles, see Photometric Performance section on following pages

7. WIRE INPUT/OUTPUT

   • S1 Single 1 (Input only) – End Feed
     S2 Single 2 (Input only) – Bottom Feed
     For continuous mounting, consider bottom feed

   • P1 Pass Through 1 (Input/output) – End Feed
     P2 Pass Through 2 (Input/output) – Bottom Feed
     For continuous mounting, consider bottom feed

8. CONNECTOR/WIRE IN

   • BW:  Bare Wire (Standard 24″)
     BRL:  Barrel
     CON6: Connector 6″
     CON24: Connector 24″
     Connector/Wire In not needed to specify product. Typical selection is BW.
     BW: Standard length is 24″, Max length is 120″. Request custom length by writing in part number next to BW (example: BW48)

   • BW: Bare Wire (Standard 24″)
     BRL: Barrel
     CON6: Connector 6″
     CON24: Connector 24″

   • Connector/Wire In not needed to specify product. Typical selection is BW.
     BW: Standard length is 24″, Max length is 120″. Request custom length by writing in part number next to BW (example: BW48)

9. CONNECTOR/WIRE OUT

   • CLS Closed End (No feed)

   • BW: Bare Wire (Standard 24″)

   • BRL: Barrel

   • CON6: Connector 6″

   • CON24:  Connector 24″
     Connector/Wire Out not needed to specify product. Typical selection is CLS or BW.

   • BW: Standard length is 24″, Max length is 120″. Request custom length by writing in part number next to BW (example: BW48)

10. INPUT END CAP
    

    • STD: Standard
      STD – End cap matches fixture finish chosen

11. OUTPUT END CAP
    

    • STD: Standard
      STD – End cap matches fixture finish chosen

12. WIRE COLOR

    • WH White
    • BK Black
    • N/A For Barrel

13. WIRE TYPE
    

    • CL2 Class 2
      

    • CL2P Plenum Rated
      

    • N/A For Barrel
      CL2P only available with bare wire leads (BW)

14. MOUNTING
    

    • SST: Stainless Steel

15. FINISH
    

    • ST Satin
    • BK Black

16. LENGTH (IN)
    Fixture length min 12”, max 98.43” not including end caps.
    Tolerance +0 – 1/8”. Consult factory for lengths under 12″

PRODUCT – DIMENSIONS

DELIVERED LUMENS

• [Calculated L70 = 40000 hrs]
• Tested with FL3SC-5.0-**-ENC-STD

| Red| Green| Blue| Amber
---|---|---|---|---
LM/FT| LM/F1| LM/FT| LM/FT
CL| 56| 304| 79| 51
TL| 35| 191| 50| 32

DIODE VISIBILITY

| ENC/CL – Clear encapsulation
---|---
ENC/TL – Translucent encapsulation

WIRE INPUT/OUTPUT

SINGLE (Input only)

**PASS THROUGH (Input/Output)

**

CONFIGURATION OPTIONS

CONNECTOR/WIRE – IN/OUT

Connector/Wire In or Out not needed to specify product. Standard configuration is BW for Wire In and CLS for Wire out

WIRE COLOR

MOUNTING

• 2 clips provided for 4′ or less; 4 clips provided for greater than 4′
• To order separately use SST-01
• Each clip comes with a #4 x 5/8″ Flat Head screw

FINISH

EXACT/OPTIMAL FIXTURE LENGTH

EXAMPLES OF 12 OPTIMISE STATIC WHITE FIXTURES WITH DIFFUSED LENS

SC ENC LENGTHS BY INCH

Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

EXACT LENGTH

OPTIMAL LENGTH: highlighted rows are closest to requested nominal length

COMPATIBLE POWER SUPPLIES

See power supplies cut sheets for more information. Data subject to change, all data has +/- 5% tolerance.

-SET-OZ-DMX O-SET-QZ-PH/0-10V Q-SET eLED+0-10V QOM-eLED+0-10V QZ-DMX QZ-PH/0 -10V
1%| QTM-eLED(E) QTM-eLED(L) OTM -eLED+DALI-DT6 QTM-eLED+DALI -DT6 AN| QOM-eLED +DALI-DT6
10″/4| Non-Dim Power Supply with SW App Dongle|
** DIMMING PROTOCOL| IOIOOOR| OUTDOOR
---|---|---
SC| SC**
Non-Olm| OTM-eLE.0-.ND
QZ-NO| Q-SET-QZ-ND
Q-SET-eLED-ND
QOM-eLED-ND
QZ-ND
iQ-ND-50-65
Pha-se| Q6M-DC+CAP
QTM-DC+CAP
QTM-eLED(E)
QTM-eLED(L)
QZ-PH/0-10V
QZ-STICK-PH/0-10V
QZLP
iQ-PH
iQ-PH+QD1| Q-SET-QZ-PH/0-10V
QOM-DC+CAP
QOM-PH
QZ-PH/0-10V
iQ-PH
0-IOV| QTM-eLED+0-10V
QTM-eLED+AN
QZ-PH/0-10V
QZ-STICK-PH/0-10V
QZLP| Q-SET-QZ-PH/0-10V
Q-SET-eLED+0-10V
QOM-eLED+0-10V
QZ-PH/0-10V
Lutron Athena| QTM-eLED+AN
QTM-eLED+DALI-DT6-AN|
ECO System| QTM-eLED(E)|
DMX| QZ-DMX| Q-SET-QZ-DMX
QZ-DMX
DALI-2: DT6| QTM-eLED+DALI-DT6
QTM-eLED+DALI-DT6-AN| QOM-eLED+DALI-DT6
SCENE App Dimmed| Non-Dim Power Supply with SW App Dongle|

COMPATIBLE MOUNTING ACCESSORIES

HINGE – HMB-M| HINGE – HMB-L| HINGE – HMB-XL| a-PIVOT| a-ANGLE
---|---|---|---|---
| | | | ****
Adjustable mounting bracket – Medium| Adjustable mounting bracket – Large| Adjustable mounting bracket – Xlarge| Small mounting accessory| Adjustable mounting accessory

COMPATIBLE WIRING ACCESSORIES

Q-mlnl-J| BARREL-EXT| BARREL FOUR-FER| CON-EXT| CON FOUR-FER
---|---|---|---|---
``
| | | |
UL Listed, miniature Junction box| 8ft barrel cable bracket extender| Splits lead from one to four LED Barrel connector fixtures| 1Oft Con cable extender| Splits lead from one to four LED Con  connectors

5 year warranty

• Field modifications void warranty
• Data subject to change, all data has +/- 5% tolerance
• Compatible for use with Q-Tran power supplies
• Florida Fish and Wildlife
• Conservation Commission (FWC) rated Strips: Red and Amber
• IK10 rated
• Patent # D798,471 S

Customer Support

© 2023 Q-Tran Inc. All rights reserved
155 Hill St. Milford, CT 06460
203-367-8777
sales@q-tran.com
www.q-tran.com

References

• Your Name as Your Email | Hover Realnames
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>