PureTools PT-C-HDM EDID HDCP And CEC Manipulation Downscaling User Manual

: June 15, 2024
: PureTools

Table of Contents

Preface
SAFETY PRECAUTIONS
Product Introduction
Feature
Package
Specification
Panel Description
System Connection
EDID&HDCP management
Firmware Upgrade
Supported Resolutions
After-Sales Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual
PT- C-HDM

User Manual
4K(60H 4:4:4), EDID, HOCP and CEC Maripulation+ Donnscaling
Model PT-C-HOM
Desgnsdin Germany
© 2023 PuroLink GmbH. All rights reserved.
Verson 1.0

Preface

Read this user manual carefuly before using this pro- duct. Pictures shown in this manual are for reference only. Different model layouts and specifcations are sub- jectto the physical product .
This manual s for operation instuctions only,not or any maintenance usage.
I the constant effort 0 improve our product we reserve the ight to make changes n functions or parameters hout prior notice or oblgation.

Trademarks
Product model and logo are rademarks. Any other trade- marks mentioned in ths manual are acknowledged as the properties of the trademark owner. No part of this publicaion may be copied or reproduced without the. prior witten consent.

FCC Statement
Ths equipment generates,uses and can adiate rado fre- quency energy and. f notinstalled and used in accordan- ce with the nstructions, may cause harmiful interference. oradio communications, It has been tested and found to comply with the limitsfor Class B digtal device, pursu- ant1o part 15 of the FCC Rules. These Umits are designed toprovide reasonable protection against harmiful nterfe- rence in commercial insalltion.
Operation of his equipment ina residenial area s tikely 0 cause interference, in which case the user at their own expense will be required o take whatever measures may be necessary to correct the inteference.
Any changes or modifcations not expressly approved by the manufacture would void the user’s autharity o ope- ate the equipment.

REACH | 1907/2006/EU
ROHS | 2011/65/EU
PuroLink hereby declres thac s produc PueTools PT-C-HDM complies with Directives 1907/2006/EU and Soriless

EMC /LVD (Electro Magnetic Compatibility / Low Voltage Directive)

PureLink GmbH hereby declares that this product PureTools PT-C-HDM complies with Directivs 2014/30/ EUand 2014/35/E. The fulltext of the EU Declaration of Conformity is available atthe following Inernet address:
http://www.purolink.de/ce/4251364735787 CE.pdf

SAFETY PRECAUTIONS

To ensure the best from the product, please read all instructions carefully before using the device. Save this manualfor further reference.

Unpack the equipment carefully and save the ori- ginal box and packing material for possible future shipment
Follow basic safety precautions to reduce therisk of fire, electrcal shock and injury to persons.
Do not dismantle the housing or modify the module, It may resultinelectrical shock or burn
Using supplies or parts not meeting the products specifications may cause damage, deteriration or malfuncton.
Refer all servicing to qualified service personnel.
To prevent fre or shock hazard, do not expose the. unit to rain, moisture or install this product near water,
Do not put any heavy items on the extension cable. incase of extrusion.
Do not remove the housing of the device 35 opening or removing housing may expose you to dangerous voltage or other hazards.
Install the device in a pisce with fine ventiation to avoid damage caused by overheat,
Keep the module away from liquids.
Spillageinto the housing may result n fire, electrical. shock,or equipment damage. If an object or (quid fall ar $pills on to the housing, unplug the module immediately
Do not twist o pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or serosol cleaners to clean this unit. Always unplug the povier to the device before cleaning,
Unplug the power cord when left unused for 3 long period of time.
Information on disposal for srapped devices: do ot burn or mix with general household waste, please treat them s norma electrical wastes.

Product Introduction

The PT-CHDM is 2 18Gbps HOMI manager with £DID, HDCP and CEC management functions. It supports up t0 4K 60Hz &4 and HDCP2.2. The product is powered directly from the HDMI port or via USB-C and supports auto-downsealing form 4K to 1080p.

Feature

18Gps HOMI 2.0- 4K 60Hz 44 HDCP22
Supports EDID and HDCP management
CEConloff switch
Auto-downscaling form 4K o 1080
Powered via HOMior USB-C

Package

X PT-CHOM
1 User Manual

Specification

Video Input

Panel Description

Power LeD:
The LED indictes green when power is on.
HDMI IN: HDMI 2.0 input,connect o source.
DIP Switch: 4- pin dip switch for EDID and HDCP management.
USB-C : USB-C is used to power the devie, upload EDID’s and firmware upgrade.
CECSwotch : Turn on/off the CEC.
HDMI OUT: HDMI2.0 outpur,connect o isplay.

System Connection

EDID&HDCP management

Predefined EDID Setting

Switch Status	Video Resolution	Audio Format.
000	Obtain the dsplay EDID
001	1080p	LPCM
010	1080p	DTS/Dolby
011	3840 2160@30Hz HDR	LPCM
100	3840 2160@30Hz HDR	DTS/Dolby
101	3840 2160@60Hz HDR	LPCM
110	3840 2160@60Hz HDR	DTS/Dolby
111	user defined EDID

Use Defined DI ecing

Rename the user defined EDID according the following format:0803C000.DAT
Connect the machine t© the PC with USB cable, the PC will automaticaly detect U-disk named of BOOTISK”.
Copy the EDID fileinta the U-disk, and then open the Usdisk.f there is SUCCESS. TXT fle, it means that the EDID upload is successful.
Remove the USB cable connect the adapter o povier on the machine.

HDCP management

Staws	HDCP Function
1	Communicate o source that no HDCP 15 supported by the device, then the

source will send the content without HDCP if the signal format allows i,
0| Switch off HDCP management

Firmware Upgrade

Rename the upgrade file according the following format: 08009000 APP
Disconnect the HOMI and connect the PT-C-HDM to the PC with USB cable, the PC will detect a U-disk named of “BOOTDISK”.
Copy the file nto the U-gisk, and then open the U- disk. If there is 3 SUCCESS.TXT file it means upgrade is successful, and f there s an UNKNOW.TXT fle, it means fail.

Supported Resolutions

640x480p@ 60,67.72,75Hz
720x400p@ 70Hz
720x480p@ 60Hz
720x480i@ 60Hz
720x576p@ 50Hz
720x576i@ 60Hz
800x600p@ 56, 60,72, 75Hz
832x624p@ 75Hz
1024x768p@ 60,70, 7Hz
1280x1024p@ 75Hz
1280x720p@ 50Hz
1152x870p@ 75Hz
1152x864p@ 75Hz
1280x1024p@ 60Hz
1280x960p@ 60Hz
1440x900p@ 60Hz
1600x1200p@ 60Hz
1680x1050p@ 60Kz
1920x1080p@ 50, 60tz
1920×10801@ 50, 60Hz
1920x1200p@ 60Hz
2560x1440p@ 60Hz
3840x2160p@ 26,30, 60 Hz

After-Sales Service

If there appear some problems when running the pro- duct, please check and deal with the problems referring t0 this user manual Any transport costs are borne by the users during the warranty.

Product Limited Warranty: This product will be free from defects in materials and workmanship or three years (The purchase invoice shall prevail).
Proof of purchase in the form of a billof sele o re- celpted nvoice which s evidence that the uni s wit- hinthe Warranty period must be presented to obtain waranty sevice.
What the warranty does not cover (servicing available for fee):
• warranty expiration.
• Factory applied serial number has been altered or removed from the proct
• Damage, deterioration or malfunction caused by:
• Normal wear and tear
• Use of supplies or parts not meeting our specifications.
• No certfcate or nvoice a5 the proof of warranty.
• The product model showed on the warranty card does not match with the model of the product for repairing or had been alered.
• Damage coused by force majeure.
• Servicing not authorized by distributor.
• Any other causes which do not relate to a product defect.
• Delivery nstllaton or abor charges for instalation or setup of the product.
Technical Support: For any questions or problems, contact your distributor o reseller and tell them the respecive product name and version, the de- tailed failure situation as well as the formation of the cases.