Magnani MI-HA-CCPM01-B Cordless Crepe Maker User Manual

June 4, 2024
Magnani

Magnani MI-HA-CCPM01-B Cordless Crepe Maker User Manual
Magnani MI-HA-CCPM01-B Cordless Crepe Maker

PACKAGE CONTENTS

  • Cordless crepe maker
  • Electric base
  • Batter dish
  • Spatula
  • Whisk
  • User manual

SAFETY INSTRUCTIONS

The following precautions must always be taken in consideration before using the “Magnani – Cordless crepe maker”, hereinafter referred to as the ‘device’.

WARNING!

**Some of this device parts and accessories can become hot. Do not touch these parts to avoid burning yourself.

**

General information

  • Read the instructions for use carefully and keep them safe. If you give this device to other people, please also pass on this manual.
  • Only use this device in accordance with the instructions in this user manual.
  • This device can be used by children aged 8 and over and people with restricted physical, sensory or mental capacity or a lack of experience and expertise, provided they are under supervision or have been given instructions about safely using the device and are aware of the potential hazards. Children must not play with the device. Cleaning and maintenance must not be done by children unless they are over the age of 8 and under supervision.
  • Keep the device and power cord out of the reach of children below the age of 8 years.
  • This device is intended for domestic or similar use, not for professional use.
  • WARNING! Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!

Electricity and heat

  • Prior to use, check that the mains voltage is the same as the mains voltage stated on the name plate of the device.
  • Make sure your hands are dry before touching the device, power cord or plug.
  • Plug the power plug into an earthed electrical outlet that is easily accessible at all times.
  • WARNING! Never cover the power plug, cable, electric base or device with cloths, curtains or any other material in order to prevent overheating and potential fire hazards.
  • Make sure that the device and power cable do not come into contact with heat sources, like a hot hob or naked flame.
  • The device must be able to dispel its heat in order to prevent the risk of fire. Therefore, make sure the device has sufficient free space around it (at least 20 cm on all sides) and do not place the device against and/or on or near combustible materials.
  • Check the power cord regularly for damage.
  • Never use the device if the power cord shows signs of damage, if the device has fallen on the ground or shows any other signs of damage.
  • Switch OFF the device and remove the power plug if you discover any faults during use, find any signs of damage, are not using the device or are cleaning it.
  • Make sure the power cord cannot be trodden on or pinched.
  • Do not allow the power cord to hang over sharp edges and keep it away from hot objects and naked flames.
  • When plugging in the power plug, make sure people cannot accidentally pull it out or trip over it.
  • Remove the power plug from the power socket during lightning storms or if unused for long periods of time.
  • When removing the plug from the power socket, pull the plug itself, not the cable.
  • Do not operate the device using an external time switch or a separate remote control system.
  • Use a 10 amp cable if an extension cable is required. Cables with a lower amp rating may burn out.
  • When using an extension cable, make sure it is completely extended.
  • WARNING! To reduce the risk of fire or electric shock, protect the device from dripping or splashing water and keep away from objects filled with liquids, such as vases. Such objects should not be placed on or near the device.

Use

  • Do not use the device in the vicinity of flammable materials.
  • Do not leave the device unattended when it is in use.
  • This device is not a toy and should be kept under strict supervision to prevent children from using the device as a toy.
  • Do not allow children to clean or maintain this device unsupervised.
  • Never allow children to use domestic appliances as toys or without supervision. Children are unable to judge the hazards associated with incorrectly using electric appliances.
  • Children in the vicinity of the device must always be supervised by an adult.
  • Always ensure the device is properly assembled before use.
  • Place the device on a flat and stable surface, in a place where it cannot fall over.
  • Do not lean on the device.
  • Maintain a clearance of at least 20 cm around the device. This prevents damage from heat.
  • When operating, do not touch the cooking plate by hand or any other means.
  • Do not use hands or any other body parts to feel the temperature of the device while it is being operated.
  • Do not use the batter dish or device in a conventional oven.
  • Do not place the batter dish or device onto a hot gas or electric burner.
  • WARNING! Do not place the batter dish on the cooking plate of the device as this can melt the batter dish.
  • Only use the batter dish with the device. Do not use any other batter dish.
  • Do not use a damaged batter dish.
  • WARNING! Splash danger. Use a paper towel to remove excess butter before putting the batter on the cooking plate.
  • It is advisable to place a heat -resistant covering between the table and the device, to prevent the heat leaving marks on your table.
  • **** Do not move the device during cooking.
  • Never move the device when it is switched ON or still warm. First switch OFF the device and only move it when it has cooled down.
  • The surface (cooking plate) of the device becomes hot during use. DO NOT TOUCH!
  • Only use heat resistant tools featuring a handle that is well insulated against heat.
  • If using plastic utensils, do not leave them on the device when it is hot!
  • Wear oven gloves when handling the device during and immediately after use and use heat resistant utensils when checking food.
  • Do not use sharp objects on the cooking plate. These damage the non-stick coating.
  • Clean the device thoroughly after use (see “cleaning and maintenance”).
  • When in use and when stored, do not place anything else on top of the cooking plate.
  • Avoid locations subject to vibrations, cold or humidity.
  • Do not expose the device to direct sunlight, heat sources, excessive humidity or corrosive environments.
  • Do not place the device under any mechanical stress.
  • Improper use of the device could damage the product.
  • Please handle the device carefully. Impacts or falls, even from a low height, can damage the device.
  • Do not open the casing as this may result in electric shock.
  • Do not attempt to disassemble or repair the device or modify it in any manner.
  • The device must be serviced if it has been damaged in any way, i.e. the power supply cord/plug is damaged; liquid has been spilled; objects have fallen into it; it has been exposed to rain or moisture; it has been dropped or does not operate properly.
  • Do not use abrasive cleaning solvents to clean the device.
  • Do not use foreign objects to clean the device.
  • This device is intended for domestic purposes only, not for professional use.

Important information, follow these instructions

  • This device can be used by children aged 8 and over and people with restricted physical, sensory or mental capacity or a lack of experience and expertise, provided they are under supervision or have been given instructions about safely using the device and are aware of the potential hazards. Children must not play with the device. Cleaning and maintenance must not be done by children unless they are over the age of 8 and under supervision.
  • Only use the device indoors, in dry areas and not in the vicinity of water, other liquids or humidity.
  • Do not use the device if it, the cable or power plug has fallen into water or any kind of fluid.
  • Never immerse the device, cable and power plug in water or any kind of fluid.
  • Do not pick up the device if it has fallen into water or any kind of fluid. Remove the plug from the power socket immediately. Do not use the device again.
  • Parts of the device can become hot. Do not touch these parts to avoid burning yourself.

INSTALLING AND USING THE DEVICE

Open the packaging carefully before taking out the device. Make sure the device is complete and undamaged. If any components are missing or damaged, contact the vendor and do not use the product. Retain the packaging or recycle it in accordance with local regulations.

Parts & features of the device
Product Features

  1. Cordless Crepe maker (main device)
  2. Cooking plate
  3. Thermostat LED indicator light
  4. Power switch
  5. Handle
  6. Batter dish
  7. Connector
  8. Electric base
  9. Power cable
  10. Spatula
  11. Whisk

First use

  • Remove the device and accessories from the box. Remove any stickers, protective film or plastic from the device.
  • Before using the device for the first time, clean the base with a damp cloth and rinse all the removable parts with soapy water.
  • Thoroughly dry the base and all removable parts.
  • Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool; these could damage the device and cooking plate.
  • Place the device on a flat, stable surface, in a place where it cannot fall over.
  • Place the device 1 on the electric base 8. Ensure that the device is securely placed on the connector 7 of the electric base 8.
  • Make sure that the power switch 4 is in the “O” position.
  • Connect the device to the mains power.

Power ON/OFF

  • Make sure the power plug is connected to the mains power.
  • Power on the device by switching the power switch 4 to the “I” position. The LED light in the power switch will illuminate.
  • The device is equipped with a thermostat. The thermostat LED indicator light 3 lights up during heating. Once the required temperature has been reached, the cooking plate is ready for use and the thermostat LED indicator light 3 no longer lights up.
  • To power off the device, switch the power switch 4 to the “O” position. The LED light in the power switch no longer lights up.
  • Then remove the power plug from the mains power

Cooking

  • Before each use, make sure the device 1 , electric base 8 and batter dish 6 are clean and dry.
  • Place the device on a flat, stable surface, in a place where it cannot fall over.
  • Make sure that the power switch 4 is in the “I” position.
  • The thermostat LED indicator light 3 lights up during heating. Once the required temperature has been reached, the cooking plate is ready for use and the thermostat LED indicator light 3 no longer lights up.
  • WARNING! Do not preheat or put the batter dish 6 on the cooking plate, as the batter dish could melt as a result.
  • Before use, grease the cooking plate 2 with kitchen paper provided with edible oil or butter.

Cooking / Making Crepes

  • To make crepes, use a special crepe mix or crepe recipe. Measure each ingredient carefully and add it to a bowl in the order stated in the recipe. Beat the mixture with the whisk 11 until you have a smooth batter. The batter is ready for use when the consistency of the batter is like thick cream. Sometimes it is necessary to allow the batter to set for a better cooking result. Making changes to the recipe can change taste and texture. For example, adding butter to the recipe adds flavor and makes removal from the pan easier. Sugar adds crispness, but may cause the crepes to break when rolling them.
  • Pour the batter into the batter dish 6.
  • Make sure the cooking plate of the device is hot and the  thermostat LED indicator light 3 no longer lights up before you start baking, otherwise the batter will not adhere sufficiently. This can also happen if the batter contains too much butter.
  • When the cooking plate is preheated, hold the device 1 by the handle 5 and take the device from the electric base 8 .
  • Turn the device over, with the cooking plate 2 facing downwards.
  • Dip the cooking plate 2 , initially at a slight angle and then flat, in the batter of the batter dish 6 for ± 3 seconds, to quickly coat the surface of the cooking plate. Remove the device from the batter dish and turn over the device (cooking plate facing up). Place the device carefully back onto the electric base 8 .
  • The crepe will be ready in ± 20 seconds, when the batter changes color and the rim warps up slightly. The baking time can deviate according to the recipe or personal preferences.
  • Scoop the crepe from the cooking plate 2 with the spatula 10 and put the crepe on a plate or dish.
  • Repeat this process until a small layer of batter remains in the batter dish.
  • WARNING! Make sure that the cooking plate 2 does not touch the bottom or sides of the batter dish 6 , this can cause damage to the white plate and cooking plate.
  • When there is a small layer of batter in the batter dish 6, it is highly recommended to pour the batter carefully over the (facing up) cooking plate 2. Do not overfill the cooking plate.
  • he crepes can be eaten or stored in the fridge or freezer. When storing the crepes in the fridge or freezer, pack the crepes into tinfoil or a food wrapper, squeeze out the air on the inside and put the crepes into a plastic box.
  • Take the crepes from the fridge or freezer in time if you want to eat them. Allow the crepes to reach room temperature before eating them.
  • The cooked crepes can be eaten plain or with other ingredients. For example, put onion, vegetables or fruits into a rolled-up crepe or add a sauce to the crepe. Wrap a crepe and put it on a cold dessert such as ice cream or cream cheese.
  • WARNING! Do not cook raw meats or foods other than crepe batter on the cooking plate. Avoid cross contaminations from different types of food.
  • WARNING! Splash danger. Use a paper towel to remove excess butter before putting the batter on the cooking plate.
  • WARNING! Danger to life from burning. Do not leave children unattended with the device, as improper use can cause it to fall over and cause severe burns from the cooking plate.
  • CAUTION! Prevent burns. Do not touch the cooking plate; it is very hot. When removing, use kitchen gloves for extra protection.
  • **** Do not use metal items to remove dirt or grease from the cooking plate. This prevents the non-stick coating from being damaged. Use a damp cloth or paper to remove dirt or grease from the cooking plate.

CLEANING AND MAINTENANCE

  • Clean the device after each use.
  • Switch the power switch to the “O” position, remove the plug from the mains power and allow the device to cool down fully (± 30 minutes).
  • Never immerse the device in water or any other liquid.
  • Clean the electric base, power cable and device with a damp cloth.
  • Clean the batter dish, spatula and whisk in warm water and washing-up liquid.
  • Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool; these damages the device and will scratch and damage the non-stick materials.
  • Thoroughly dry the electric base, power cable and device.
  • Re-assemble the device in such a way that the device is back in place on the electric base.
  • Do not store any metal accessories on the cooking plate as these could damage the non-stick coating.
  • Do not clean the device, batter dish, spatula and whisk in the dishwasher
  • If the non-stick coating has been damaged as a result of  abrasion with the accessories, do not use the device!
  • Store the device in a dry place.

SPECIFICATIONS

  • Voltage input: 220 – 240 V~, 50/60 Hz
  • Power: 800 W
  • Cable length: 1.1 m
  • Weight: 795 g
  • Dimensions: 7.5 x 20 x 37 cm (H x W x D)

STORAGE & TRANSPORTATION

  • When storing the device, it should first be cleaned in accordance with this user manual. The device should be stored in its original packaging.
  • Always store the device in a dry and well-ventilated room and beyond the reach of children.
  • Protect the device against vibrations and shocks during transport.

All contents and specifications mentioned in this manual are subject to change without prior notice.

INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT
(WEEE, the waste electrical and electronic equipment directive)

Your product has been manufactured using high quality materials and components which can be recycled and used again. At the end of its life span, this product cannot be disposed of in normal domestic waste, but must be taken to a special collection point for recycling electrical and electronic equipment. This is indicated in the user manual and in the packaging by the waste container marked with a cross symbol. Used raw materials are suitable for recycling.
By recycling used appliances or raw materials, you are playing an important role in protecting our environment. You can ask your local council about the location of your nearest collection point.

EU Declaration Of Conformity

We,
Mascot Online BV Veluwezoom 32 1327 AH Almere
The Netherlands

Declare under our sole responsibility that the product:

  • Product Brand: Magnani Italy
  • Product Model No: MI-HA-CCPM01-B
  • Product Description: Cordless crepe maker
  • Product Rating: 220 – 240 V~, 50/60 Hz, Class I, 800 W

Following the provisions of the Directives:

  • Electromagnetic Compatibility (EMC): 2014/30/EU
  • Energy Related products (ERP): 2009/125/EC
  • Low Voltage Directive (LVD): 2014/35/EU
  • Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive: 2011/65/EU, with its amendment 2015/863/EU And standards to which Conformity is declared:

EMC:

  • EN 55014-1:2017
  • EN 55014-2:2015
  • EN IEC 61000-3-2:2019
  • EN 61000-3-3:2013 + A1:2019

ERP:

  • Commission regulation (EC) No 1275/2008
  • Commission regulation (EU) 801/2013

LVD:

  • EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 +  A2:2019 + A14:2019
  • EN 60335-2-9:2003 + A1:2004 + A2:2006 + A12:2007 + A13:2010
  • EN 62233:2008

Date & place of issue: Almere, 01-5-2021

Authorized Signature name: B. van Dijk
Title: Managing Director

Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Magnani User Manuals

Related Manuals