Hard Head 343586 Key Cabinet Instruction Manual
- June 4, 2024
- Hard Head
Table of Contents
- Hard Head 343586 Key Cabinet Instruction Manual
- Read the operating instructions carefully before use!
- INSTALLATION
- OPERATION
- Opening the cabinet
- Locking the cabinet
- Resetting the combination lock
- MAINTENANCE
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Hard Head 343586 Key Cabinet Instruction Manual
Read the operating instructions carefully before use!
Please retain for future reference.
INSTALLATION
- Mount the key cabinet onto a stable wall. Use all four holes on the back panel. The screws should be tightened sufficiently, without distorting the back plate. The flexible gasket on the back should\ be used for all installations. Wall plugs should be used for masonry and brick walls.
- The key cabinet should be mounted in a discreet but accessible location for maximum protection in an area with sufficient light to be able to read the dial. The key cabinet can be placed indoors or outdoors.
OPERATION
Your key cabinet is factory preset to “0-0-0-0″
Enter your new code here: ” ____ ”
Opening the cabinet
- Rotate the four dials to the correct combination, then pull the cabinet door downwards, towards you.
Locking the cabinet
- Hang the key (or other object) you would like to store securely in the key cabinet, close the lid and set the lock to a random combination to lock it.
Resetting the combination lock
- Please read all instruction thoroughly before resetting combination. Memorise and record the new combination above for future reference. Keep these instructions, with the code written in them, in a secure place.
- Open the key cabinet using the secret number (the factory preset to “0-0-0-0”).
- Remove the rubber cover from the reset lever inside the cabinet. Then slide the reset pin to the left and down as per arrow (lid should be opened towards you).
- Rotate the four dials on the front to your new secret combination. Ensure the numbers are positioned centrally and have clicked into position.
- Slide the reset pin inside the box upwards and to the right this time – opposite to the direction of the arrow.
- Close the lid. To lock the cabinet you must turn the four dials to a random combination. Check the operation of the cabinet by opening it using the new combination.
MAINTENANCE
It is recommended that the dials are rotated weekly to keep them moving freely.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>