Magnani MI-HA-AF6-B Digital Air Health Fryer Oven 12L User Manual

Digital Air Health Fryer Oven 12L with preset functions

User Manual
Model: MI-HA-AF6-B

PACKAGE CONTENTS

A Digital air health fryer 12L
B User manual
C Rotisserie fork parts
D Rotating mesh basket
E Mesh basket
F Drip tray
G Rotisserie fetch tool

|
---|---

**** SAFETY INSTRUCTIONS

The following precautions must always be taken into consideration before using the “Magnani – Digital air health fryer oven 12L”, hereinafter referred to as the ‘device’.

WARNING!

| Some of this machine’s parts and accessories can become hot.
Do not touch these parts to avoid burning yourself.
---|---

General information

• Read the instructions for use carefully and keep them safe. If you give this device to other people, please also pass on this manual.
• Only use this device in accordance with the instructions in this user manual.
• This device can be used by children aged 8 and over and people with restricted physical, sensory, or mental capacity or a lack of experience and expertise, provided they are under supervision or have been given instructions about safely using the device and are aware of the potential hazards. Children must not play with the device. Cleaning and maintenance must not be done by children unless they are over the age of 8 and under supervision.
• This device is intended for domestic or similar use, not for professional use.
• WARNING! Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!

Electricity and heat

• Prior to use, check that the mains voltage is the same as the mains voltage stated on the nameplate of the device.
• Make sure your hands are dry before touching the device, power cord, or plug.
• Plug the power plug into an earthed electrical outlet that is easily accessible at all times.
• WARNING! Never cover the power plug or cable with clothes, curtains, or any other material in order to prevent overheating and potential fire hazards.
• Make sure that the device and power cable do not come into contact with heat sources, like a hot hob or naked flame.
• The device must be able to dispel its heat in order to prevent the risk of fire. So make sure the device has sufficient free space around it (at least 10 cm from all sides) and do not place the device in contact with combustible materials and/or on or near combustible materials.
• **WARNING!** The device and/or the air inlet and/or air outlet must not be covered, in order to prevent overheating and potential fire hazards.
• Check the power cord regularly for damage.
• Never use the device if the power cord shows signs of damage if the device has fallen on the ground or shows any other signs of damage.
• Switch OFF the device and remove the power plug if you discover any faults during use, find any signs of damage, are not using the device, or are cleaning it.
• Make sure the power cord cannot be trodden on or pinched.
• Do not allow the power cord to hang over sharp edges and keep it away from hot objects and naked flames.
• When plugging in the power plug, make sure people cannot accidentally pull it out or trip over it.
• Remove the power plug from the power socket during lightning storms or if unused for long periods of time.
• Use a 10 amp cable if an extension cable is required. Cables with a lower amp rating may burn out.
• When using an extension cable, make sure it is completely extended.
• WARNING! To reduce the risk of fire or electric shock, protect the device from dripping or splashing water and keep away from objects filled with liquids, such as vases. Such objects should not be placed on or near the device.

Use

• Do not use the device in the vicinity of flammable materials.
• Do not leave the device unattended when it is in use.
• Never move the device when it is switched ON or still warm. First, switch OFF the device and only move it when it has cooled down.
• Only use tools featuring a handle that is well insulated against heat or use the fetch tool while wearing oven gloves.
• Do not use sharp objects on the accessories. These could damage the non-stick coating.
• Do not spill hot oil on the heating element. This will create smoke and cause unpleasant smells.
• Clean the device thoroughly after use (see “cleaning and maintenance”).
• It is advisable to place a heat-resistant covering between the table or sink counter and the device, to prevent the heat from leaving marks on your table or worktop.
• Avoid locations subject to vibrations, cold, or humidity.
• Do not expose the device to direct sunlight, heat sources, excessive humidity, or corrosive environments.
• Do not place the device under any mechanical stress.
• Improper use of the device could damage the product.
• Please handle the device carefully. Impacts or falls, even from a low height, can damage the device.
• Do not open the casing as this may result in electric shock.
• Do not attempt to disassemble or repair the device or modify it in any manner.
• The device must be serviced if it has been damaged in any way, i.e. the power supply cord/plug is damaged; liquid has been spilled; objects have fallen into it; it has been exposed to rain or moisture; it has been dropped or does not operate properly.
• Do not use abrasive cleaning solvents to clean the device.
• Do not use foreign objects to clean the device.
• This device is intended for domestic purposes only, not for professional use.
• Make sure that food in the fryer cannot come into contact with the heating components
• When the device is working, the hot air is released via the air outlet, and users should therefore keep a safe distance from the outlet for safety.

Important information, follow these instructions

• This device can be used by children aged 8 and over and people with restricted physical, sensory, or mental capacity or a lack of experience and expertise, provided they are under supervision or have been given instructions about safely using the device and are aware of the potential hazards. Children must not play with the device. Cleaning and maintenance must not be done by children unless they are over the age of 8 and under supervision.
• Only use the device indoors, in dry areas, and not in the vicinity of water, other liquids, or humidity.
• Do not use the device if, the cable or power plug has fallen into water or any kind of fluid.
• Never immerse the device, cable, and power plug in water or any kind of fluid.
• Do not pick up the device if it has fallen into water or any kind of fluid. Remove the plug from the power socket immediately. Do not use the device again.
• Place the device on a flat and stable surface, in a place where it cannot fall over.
• Do not switch ON the device until all the accessories have been properly installed and make sure the oven door is closed before you plug the device into the mains and switch it ON.
• Parts of the device can become hot. Do not touch these parts to avoid burning yourself.
• Only hold the accessories by means of the fetch tool while wearing oven gloves. The metal sections can become very hot.
• Never use or fill the oven or any of its accessories with oil; this may cause a fire hazard!
• The device is equipped with an overheating safety feature. This is activated if the temperature becomes too high. If this is the case, you must let the device cool down before it can be used again. Switch OFF the device and then remove the plug from the power socket. Allow the device to fully cool down. The device needs approximately 30 minutes to fully cool down.
• Remove the power plug from the power socket if the device is unused for long periods of time.
• When removing the plug from the power socket, pull the plug itself, not the cable.
• Do not operate the device using an external time switch or a separate remote control system.

INSTALLING AND USING THE DEVICE

Open the packaging carefully before taking out the device. Make sure the device is complete and undamaged.
If any components are missing or damaged, contact the vendor and do not use the product. Retain the packaging or recycle it in accordance with local regulations.

Parts & features device
1 Fryer – Oven
2 Digital control panel
3 Door handle (to open the fryer – oven door)
4 Oven door
5 Hot air outlet (CAUTION! HOT do not touch or cover)
6 Power cord storage

Digital control panel:
The device is operated via a touch panel. Gently press the desired function with the tip of your finger.

Description of buttons:

A. POWER ON/OFF & START BUTTON.
Press the power button A once to switch the device ON, the display lights up.
Press the power button A again to start the cooking process. The default settings when switching on the device are 180°C and 15 minutes.
Press the power button A again to switch OFF the device, the temperature display C shows — and the timer display B shows -. The fan continues to run for ± 30 seconds to cool down the device.
When no selection is made, or no cooking process is started, the device switches OFF automatically after approximately 5 min.
B. TIMER DISPLAY
Indicates the selected or remaining minutes (hours in dehydration mode).
C. TEMPERATURE DISPLAY
Indicates the selected temperature.
D. ROTATION
Press the rotation button D once to switch on the rotation function. Please note that the rotisserie fork or rotating mesh basket needs to be installed and can be used with any preset cooking program. The rotation button D LED flashes to indicate that the rotation function is switched on. Press the rotation button D again to switch off the rotation function.
E. LIGHT BUTTON
Press the light button E once to switch on the light in the cooking compartment. Once pressed, the light switches on for 3 minutes, and the light button E LED flashes once activated. Press the light button E again to switch off the light in the cooking compartment.
F. TEMPERATURE UP – DOWN
Selection button for temperature adjustment, ranging from 50°C to 200°C.
Press the button F to increase the cooking temperature by 5 °C
Press the  button F to decrease the cooking temperature by 5 °C
When increasing or decreasing the temperature, the display C shows the selected °C and flashes to indicate the selected temperature.
Keeping the button pressed will rapidly increase or decrease the temperature.
G. TIMER UP – DOWN
Selection button for time adjustment, ranging from 1 min to 60 min.
Press the button G to increase the cooking time.
Press the button G to decrease the cooking time.
Each press increases or decreases the time by 1 minute.
When increasing or decreasing the time, the display B shows the selected minutes and flashes to indicate the selected time. Keeping the button pressed will rapidly increase or decrease the time.
In dehydrating mode, the time can be adjusted from 1 hour to 8 hours.
When increasing or decreasing the time, the display B shows the selected hours and flashes to indicate the selected hours (1H – 8H). Keeping the button pressed will rapidly increase or decrease the time.
H. PRESET COOKING PROGRAMS
There are 8 preset cooking programs
Press the desired preset cooking program button H to select between the 8 preset cooking mode programs.
The selected preset mode symbol starts flashing, and the LCD displays B & C to indicate the temperature and time of the selected program. The temperature and time can be adjusted manually.

Once a preset program has been selected, press the power button A again to start the cooking process.
Press the power button A again to switch OFF the device.
Note! When making selections as described above, a beep sound can be heard.
I. PROGRESS
When the 6 LED indicators I are blinking in sequence, this is an indication that the device is cooking.
When the device stops working (end of the set program) the device switches OFF automatically and the temperature display C shows — and the timer display B shows -.

Accessories

ROTISSERIE FORK

1. Rotisserie – shaft (1 pcs)
2. Rotisserie – forks (2 pcs)
3. Set of screws (2 pcs)

The rotisserie fork is suitable for cooking larger foods such as roasts, chicken, and fish.
Force the shaft lengthwise through the meat and center it.
Slide the forks onto the shaft from either end into the meat. Then lock it in place with the set of screws. There are indentations on the shaft for the set screws. The screws can be adjusted closer to the middle of the shaft if needed, but never outward towards the shaft ends. Insert the left side of the assembled rotisserie shaft into the
left socket of the device and place the right side onto the U-shaped hanger by means of the rotisserie fetch tool.
Be sure the shaft is in place before engaging in rotation.
NOTE! Make sure the roast, chicken, or fish is not too large to rotate freely within the oven.

ROTATING MESH BASKET
Used for cooking small-sized strips or granulated foods such as French fries, peanuts, corn granules, nuts, etc.
Press the linear clasp and open the removable cover of the basket.
Put the food in the basket and close the cover and make sure that the clasp is in place. Insert the left side of the basket into the left socket of the device and place the right side onto the U-shaped hanger by means of the rotisserie fetch tool. Be sure the shaft is in place before engaging in rotation.

MESH BASKET
Suitable for cooking foods with less moisture content and moderate height, such as steak, chicken legs, fish, shrimps, egg tarts, vegetables, fruit slices, etc.
Place the food (flat) on the mesh basket, but do not make it too full. There should be sufficient space between the food to ensure proper circulation of hot air.
Place the mesh basket on the corresponding support point of the inner cavity, and adjust the position of the airflow racks according to the height of the food. Make sure the mesh basket is placed horizontal to avoid slipping during cooking.

Drip tray
For easier cleaning, place the drip tray at the bottom of the inner metal plate to collect the oil and water that is released during the cooking process of the food.

Rotisserie fetch tool
With the rotisserie fetch tool, it is easy to place and remove rotating parts (rotating mesh basket & mesh basket), while preventing burns and oil stains.
Wear oven gloves while using the fetch tool. The metal sections can become very hot!

Placing rotating parts
Lift and hold the rotating parts and slowly move them into the inner cavity. Insert the left side of the shaft (longer shaft head) into the left socket of the device and place the right side onto the U-shaped hanger by means of the rotisserie fetch tool. Ensure the shaft is in place before engaging in rotation. Wear oven gloves while using the fetch tool. The metal sections can become very hot!

Removing rotating parts
Open oven door 4 to pause the cooking progress or switch off the device by pressing the power button A.
Wear oven gloves while using the fetch tool. The metal sections can become very hot!
Insert the rotisserie fetch tool beneath the rotisserie shaft. Lift the right side of the rotisserie fetch tool at a slight angle to clear the bracket. Then shift to the right until the left side of the shaft slides out of the rotisserie shaft socket. Carefully remove the rotisserie food from the oven.
It is recommended to place a heat-resistant plate, to prevent the heat from leaving marks on your table or worktop.

Automatic switch-OFF
The device features a built-in timer that automatically shuts OFF the device after the cooking program has finished or if no selections are made when the device is switched ON.
First use:

• Remove the device and accessories from the box. Remove any stickers, protective film, or plastic from the device.
• Before you use the device for the first time, wipe all the removable parts with a damp cloth. Never use aggressive or abrasive cleaning materials, a scouring sponge, or steel wool; this damages the device, the interior, and the accessories.
• Place the device on a flat, stable surface, in a place where it cannot fall over.
• Connect the device to the mains’ power. The device generates 1 beep sound, the power ON/OFF button A lights up, the timer display B shows – and the temperature display C shows –
• Allow the device to warm up for 15 minutes without any food inside.
• On the digital control panel, press the power button A to select a preset cooking program or set the temperature and time to 15 min and press the power button A again to start the process.
• You will encounter a small amount of smoke and a specific smell the first time you use the device. This is normal and will soon disappear. Make sure there is adequate ventilation.
  

Cooking/Frying

• Place the device on a flat, stable surface, in a place where it cannot fall over.

• Switch ON the device using the power ON/OFF button A.

• PRE-HEATING: set the desired temperature; set the time to 3 minutes; press the power ON/OFF button A to start the pre-heating session and allow the device to warm up. • After pre-heating, open the oven door 4 by its door handle 3.

• Place foodstuffs in/on the selected cooking accessories. Caution: Never make the selected accessories too full. A gap between the food ensures proper circulation of hot air and prevents the food from making contact with the heating elements, which could create smoke and cause unpleasant smells.

• Insert the selected accessories (rotisserie fork – rotating basket – mesh basket) using the fetch tool.
  Caution: The device and accessories can be hot if they were in the device during pre-heating. Act carefully to avoid injury.

• Make sure the drip tray is always installed while cooking!

• Do not fill the device with oil or other liquids.

• On the digital control panel, select the desired preset cooking program (see: PRESET COOKING PROGRAMS) using the preset menu buttons H or set the desired temperature F and time G manually and press the power ON/OFF button A to start the cooking process.

• The temperature display C indicates the temperature of the cooking program and the temperature display B indicates the remaining cooking time in minutes while cooking.

• When the oven door 4 is opened during the cooking process, the process is paused, the device switches off and the display becomes black. When the oven door 4 is closed again, a beep sounds to indicate that the device continues with the remaining time of the cooking process.

• The device will start to operate and will stop automatically when the timer reaches 0.

• The alarm is activated once the set time has elapsed and 5 short double beeps can be heard. The device stops heating after approximately 20 seconds and all indication lights switch OFF, the power ON/OFF button A lights up, the timer display B shows – and the temperature display C shows –

• Use the fetch tool to remove the rotating accessories or wear oven gloves when removing the mesh basket or drip tray. Place them on a stable, horizontal, and flat heat-resistant surface.

• Caution: Prevent burns. Do not touch any accessories, these are very hot. When removing any accessories, use the fetch tool and wear oven gloves. Use a heatproof stand or coaster for extra support.

• Remove the food from the accessory and place it on a plate or dish.

• Do not use metal items to remove food from the accessories. This prevents the non-stick coating from being damaged.
  Caution: Prevent burns. When removing ingredients (e.g. beef, chicken, meat, or other ingredients with original oil or juices), excess oil or juices will have been collected at the bottom of the device on the drip tray. While removing DO NOT turn the drip tray over, otherwise, oil or juices collected at the bottom leak out onto the surface of the device. Please use tongs to pick up these ingredients one by one in order to prevent hot oil or juice spillages and possible burns.

• Excess oil, liquids, or food residues are collected in the bottom of the drip tray. They must be removed immediately after use, so they do not remain until the device is next used.

• Switch OFF the device if you are not going to continue using it and remove the plug from the power socket.

CLEANING AND MAINTENANCE

Clean the accessories and device after use.

• Remove the plug from the power socket and allow the device to fully cool down (± 30 minutes).

• Never immerse the device in water or any other liquid.

• Clean the device after each use.

• Clean the casing and insides with a damp cloth and perhaps a bit of washing-up liquid.

• First, wipe the accessories with a soft cloth or kitchen towel; then clean with a plastic washing-up brush in warm water and washing-up liquid.

• Never use aggressive or abrasive cleaning materials, a scouring sponge, or steel wool; this damages the device and will scratch and damage the non-stick materials.

• Dry the base, oven compartment, and accessories thoroughly.

• Re-assemble the accessories back inside the device.

• DO NOT store any metal tools inside the rotating basket or other accessories, you will damage the non-stick coating.

• Store the device in a dry place.

• For optimum service life of the non-stick layers and to avoid possible discoloration of the materials, we recommend handing wash these parts in warm soapy water.
  If the non-stick coating has been damaged by abrasion with the accessories, contact the nearest dealer to obtain a new set of accessories.

• The device itself and accessories CAN NOT be cleaned in the dishwasher.

SPECIFICATIONS

• Voltage input: 220-240Vac – 50/60 Hz
• Power: 1700W
• Temperature range: 50-200 ºC
• Timer range: 1-60 minutes in frying mode
• Timer range: 1-8 hours in dehydration mode
• Capacity: 12L
• Dimensions: 36,5 x 31 x 33 (H x W x D)
• Weight: 6.5 kg.

STORAGE & TRANSPORTATION

• When storing the device, it should first be cleaned in accordance with this user manual. The device should be stored in its original packaging.
• Always store the device in a dry and well-ventilated room and beyond the reach of children.
• Protect the device against vibrations and shocks during transport.

All contents and specifications mentioned in this manual are subject to change without prior notice.

INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT (WEEE , the waste electrical and electronic equipment directive)

Your product has been manufactured using high-quality materials and components that can be recycled and used again. At the end of its life span, this product cannot be disposed of in normal domestic waste but must be taken to a special collection point for recycling electrical and electronic equipment. This is indicated in the user manual and in the packaging by the waste container marked with a cross symbol. Used raw materials are suitable for recycling.
By recycling used appliances or raw materials, you are playing an important role in protecting our environment. You can ask your local council about the location of your nearest collection point.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>