Simple Designs LF2000-WHT Mother Daughter Floor Lamp with Reading Light Instruction Manual

Simple Designs LF2000-WHT Mother Daughter Floor Lamp with Reading Light

Product Information

Specifications

• Product Name: LF2000 Floor Lamp with Reading Light
• Indoor use only
• Power: 100W (F) (E) for main lamp, 60W for reading light Bulb Type: Type A 3-Way Medium Base Bulb (not included) for main lamp, Type A Medium Base Bulb (not included) for reading light
• Cleaning and Maintenance: Unplug the fixture before cleaning.
  Use a clean, dry, soft, lint-free cloth. Do not use water or other chemical cleaning agents.

Product Usage Instructions

Safety Instructions

This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature.

This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.

Cleaning and Maintenance

1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth.
3. Do not use water or other chemical cleaning agents.

Bulb Replacement

To replace the bulbs, follow these steps:

1. Unplug the lamp from the power source.
2. Allow the bulbs to cool down if they were recently in use.
3. For the main lamp, locate the Type A 3-Way Medium Base Bulb socket. Unscrew and remove the old bulb.
4. For the reading light, locate the Type A Medium Base Bulb socket. Unscrew and remove the old bulb.
5. Insert a new bulb into each socket, ensuring they are securely screwed in.
6. Plug the lamp back into the power source and test the new bulbs.

FAQ

Q: Can I use LED bulbs with this lamp?
A: Yes, you can use LED bulbs as long as they are compatible with Type A 3-Way Medium Base or Type A Medium Base sockets.

Q: Is the lamp height adjustable?
A: No, the lamp height is not adjustable. It comes with a fixed height.

Q: Can I use a dimmer switch with this lamp?
A: No, this lamp does not support dimmer switches. Use bulbs with appropriate wattage for desired brightness.

Q: Are the bulbs included with the lamp?
A: No, the bulbs are not included. You will need to purchase them separately.

Q: What is the warranty period for this lamp?
A: The lamp comes with a limited warranty. Please refer to the warranty information provided by ALL THE RAGES INC for more details.

Q: Where can I contact customer service for this product?
A : You can reach out to the customer service department at customerservice@alltherages.com for any questions or concerns regarding this product.

Instruction Manual for: LF2000

Questions?
E-mail our customer service department at customerservice@alltherages.com

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature.
This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids.
Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.

ASSEMBLY INSTRUCTIONS

1. Lay out all parts on a flat surface.

2. Begin assembly at the bottom of the lamp.

3. Insert lamp pole (B) into lamp base (A) and tighten.

4. Insert lamp pole (C) into lamp pole (B) and tighten.

5. Repeat for lamp poles (D), (E), and (F).
   If necessary, pull cord down through poles and out the bottom of the base.

6. Remove socket nut from floor lamp, install lamp shade (G) into the lamp holder and secure by replacing the socket nut.

7. Remove the socket nut from the reading light, install lamp shade (H) into the lamp holder and secure by replacing the socket nut.

8. Install bulbs. Only use bulbs of specified type and maximum rated wattage or less.

9. Plug the electrical supply cord into the wall outlet.

• 100W 1 x Type A 3-Way Medium Base Bulb (not included) 60W
• 1 x Type A Medium Base Bulb (not included)

CLEANING & MAINTENANCE

1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth.
3. Do not use water or other chemical cleaning agents.

LIMITED WARRANTY

All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101, Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:

1. Limited Warranty.
   Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty, Manufacturer shall, as its own expense, furnish replacement products or, at Manufacturer’s option, replacement parts for the defective products. Installation of the replacement products or replacement parts shall be at Buyer’s expense.

2. Exclusive Obligation:THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. Manufacturer shall not have any other obligation with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall Manufacturer be liable for incidental, special, or consequential damages.

3. Other Statements.Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty.

4. Entire Obligation.This Limited Warranty states the entire obligation of Manufacturer with respects to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.

ALL THE RAGES INC
355 EISENHOWER PARKWAY
SUITE 101
LIVINGSTON, NJ 07039
WWW.ALLTHERAGES.COM
PRINTED IN CHINA

References

• Home | All The Rages

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>