Simple Designs LT2058-GRY Round Concrete Table Lamp Instruction Manual

June 14, 2024
Simple Designs

Simple Designs LT2058-GRY Round Concrete Table Lamp

Simple-Designs-LT2058-GRY-Round-Concrete-Table-Lamp-
PRODUCT

Product Information

The Concrete Table Lamp is a portable lamp designed for indoor use. It features a polarized plug with one blade wider than the other, providing a safety feature to reduce the risk of electrical shock and fire. The lamp should not be used near water and should
never be immersed in water or other liquids. Additionally, the lamp should not be covered with any object as it poses a fire hazard. The bulb may become hot, so caution should be taken when handling it. The lamp requires 1 x 60W medium base type A bulb, which is not included.

Usage Instructions

  1. Assembly:
  2. Unscrew the socket nut and remove the lamp shade. Remove the protective plastic.
  3. Return the lamp shade to the body and secure it with the socket nut.
  4. Install a bulb of the specified type and maximum rated wattage or less.
  5. The assembly is complete.
  6. Plug the electrical supply cord into the wall outlet.
  7. Use the rotary switch located on the cord to turn the lamp on/off.

Cleaning & Maintenance

  1. Unplug the fixture before cleaning.
  2. Use a clean, dry, lint-free cloth to clean the lamp.
  3. Do not use water or other chemical cleaning agents.

If you have any further questions or need assistance, please contact our customer service department at customerservice@alltherages.com.

Limited Warranty: All The Rages Inc. provides a limited warranty for the Concrete Table Lamp. For warranty information and inquiries, please refer to the contact details below:
All The Rages Inc.
355 Eisenhower Parkway, Suite 101
Livingston, NJ 07039
Website: www.alltherages.com
Printed in China

Questions?
E-mail our customer service department at customerservice@alltherages.com

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature.
This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.

ASSEMBLY INSTRUCTIONS

Simple-Designs-LT2058-GRY-Round-Concrete-Table-
Lamp-FIG- \(1\)

  1. Unscrew the socket nut and remove the lamp shade. Remove the protective plastic. Return the lamp shade to the body and secure with socket nut.
  2. Install bulb. Only use bulb of specified type and maximum rated wattage or less.
  3. Assembly is complete.
  4. Plug the electrical supply cord into the wall outlet. Use the rotary switch located on the cord to turn the lamp on/off.

CLEANING & MAINTENANCE

  1. Unplug the fixture before cleaning.
  2. Use a clean, dry, lint-free cloth.
  3. Do not use water or other chemical cleaning agents.

REQUIRED PART

Requires 1 x 60W medium base type A bulb (not included)

LIMITED WARRANTY

All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:

  1. Limited Warranty.
    Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to the Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty,
    A manufacturer shall, at its own expense, furnish replacement products or, at the Manufacturer’s option, replacement parts for the defective products. Installation
    of the replacement products or replacement parts shall be at the Buyer’s expense.

  2. Exclusive Obligation:
    THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of the Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. The manufacturer shall not have any other obligation with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall the Manufacturer be liable for incidental, special, or consequential damages.

  3. Other Statements.
    Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty.

  4. Entire Obligation.
    This Limited Warranty states the entire obligation of the Manufacturer with respect to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect

ALL THE RAGES INC
355 EISENHOWER PARKWAY SUITE 101 LIVINGSTON, NJ 07039
WWW.ALLTHERAGES.COM
PRINTED IN CHINA

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Simple Designs User Manuals

Related Manuals