Simple Designs LT2007 Mini Basic Table Lamp User Manual
- June 14, 2024
- Simple Designs
Table of Contents
Simple Designs LT2007 Mini Basic Table Lamp
Product Information
- Product Name: LT2007 Mini Basic Table Lamp
- Manufacturer: All The Rages Inc.
- Model Number: LT2007
- Power Source: Electrical supply cord
- Bulb Requirement: 1 x 40W Candelabra base Type B bulb (not included)
- Usage: Indoor use only
Important Safety Instructions:
- This lamp has a polarized plug. Ensure that the wider blade of the plug is inserted into the outlet correctly.
- If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
- Do not use the lamp with an extension cord unless the plug can be fully inserted.
- Avoid using the lamp near water or immersing it in liquids.
- Never cover the lamp with cloth or paper as it may cause a fire hazard.
- Avoid touching the bulb immediately after turning off the lamp as it will be hot.
- This lamp is not a toy and should be kept away from children.
Product Usage Instructions
- Unscrew the socket nut and remove the lamp shade. Remove any protective plastic covering.
- Place the lampshade back onto the body and secure it with the socket nut.
- Select a bulb of the specified type and maximum rated wattage (40W or less).
- Install the bulb into the socket.
- The assembly is now complete.
- Plug the electrical supply cord into a wall outlet.
- Use the rotary switch located on the cord to turn the lamp on/off.
Cleaning & Maintenance
- Always unplug the lamp before cleaning.
- Use a clean, dry, lint-free cloth to wipe the lamp and remove any dust or dirt.
- Avoid using water or chemical cleaning agents, as they may damage the lamp.
Warranty Information:
This product is covered by a limited warranty provided by All The Rages
Inc. For warranty inquiries or claims, please contact All The Rages Inc. at
the following address:
All The Rages Inc. 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039
Website : www.alltherages.com
Note : This product is printed in China.
Mini Basic Table Lamp
Questions?
E-mail our customer service department at
customerservice@alltherages.com
IMPORTANT SAFETY INSTRUCTIONS
- This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way.
- If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
- Never use an extension cord unless the plug can be fully inserted.
- Do not alter this safety feature.
- This lamp is for indoor use only.
- The lamp should not be used near water.
- Never immerse the lamp in water or other liquids.
- Never cover the lamp with any object including cloth or paper as this is a fire hazard.
- Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.
ASSEMBLY INSTRUCTIONS:
- Unscrew the socket nut and remove the lamp shade. Remove the protective plastic. Return the lamp shade to the body and secure it with a socket nut.
- Install bulb. Only use bulbs of specified type and maximum rated wattage or less.
- The assembly is complete.
- Plug the electrical supply cord into the wall outlet. Use the rotary switch located on the cord to turn the lamp on/off.
CLEANING & MAINTENANCE
- Unplug the fixture before cleaning.
- Use a clean, dry, lint-free cloth.
- Do not use water or other chemical cleaning agents.
1 x 40W Candelabra base Type B bulb (not included).
**LIMITED WARRANTY
**
All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:
Limited Warranty.
Manufacturer warrants that the products sold hereunder will be free from
defects in material and workmanship for a period of one (1) year from the date
of purchase. If the products do not conform to this Limited Warranty during
the warranty period (as herein above specified), Buyer shall notify
Manufacturer in writing of the claimed defects and demonstrate to
Manufacturer’s satisfaction that said defects are covered by this Limited
Warranty. If the defects and proof of purchase are properly reported to the
Manufacturer within the warranty period, and the defects are of such type and
nature as to be covered by this warranty, the Manufacturer shall, at its own
expense, furnish replacement products or, at Manufacturer’s option,
replacement parts for the defective products. Installation of the replacement
products or replacement parts shall be at the Buyer’s expense.
Exclusive Obligation:
THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of the
Manufacturer shall be to repair or replace the defective products in the
manner and for the period provided above. The manufacturer shall not have any
other obligation concerning the products or any part thereof, whether based on
contract, tort, strict liability, or otherwise. Under no circumstances,
whether based on this Limited Warranty or otherwise, shall the Manufacturer be
liable for incidental, special, or consequential damages.
Other Statements:
Manufacturer’s employees or representatives’ oral or other written statements
do not constitute warranties, shall not be relied upon by Buyer, and are not
part of the contract for sale or this limited warranty.
Entire Obligation:
This Limited Warranty states the entire obligation of the Manufacturer with
respect to the products. If any part of this Limited Warranty is determined to
be void or illegal, the remainder shall remain in full force and effect.
ALL THE RAGES INC 355 EISENHOWER PARKWAY SUITE 101 LIVINGSTON, NJ 07039 WWW.ALLTHERAGES.COM
PRINTED IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>