Simple Designs IM-LT2060 Geometric Concrete Table Lamp Instruction Manual
- June 14, 2024
- Simple Designs
Table of Contents
Simple Designs IM-LT2060 Geometric Concrete Table Lamp
Product Information
Specifications
- Product Name: Concrete Table Lamp
- Bulb Type: 40W Candelabra base Type B bulb (not included)
- Usage: Indoor use only
- Plug Type: Polarized plug with one wider blade
- Power Supply: Electrical outlet
- Manufacturer: All The Rages Inc.
- Address: 355 Eisenhower Parkway Suite 101, Livingston, NJ 07039
- Website: www.alltherages.com
- Country of Manufacture: China
Product Usage Instructions
Safety Instructions
This portable lamp has a polarized plug to reduce the risk of electrical shock and fire. Follow these safety instructions:
- Ensure the lamp is used with a polarized outlet.
- If the plug does not fit fully in the outlet, reverse the plug.
- If the plug still does not fit, contact a qualified electrician.
- Never use with an extension cord unless the plug can be fully inserted.
- Do not alter this safety feature.
Assembly Instructions
To assemble the lamp, follow these steps:
- Unscrew the socket nut and remove the lamp shade.
- Remove the protective plastic from the lamp shade.
- Return the lamp shade to the body and secure it with the socket nut.
- Install the specified type and maximum rated wattage bulb.
- Assembly is complete.
- Plug the electrical supply cord into the wall outlet.
- Use the rotary switch located on the cord to turn the lamp on/off.
Cleaning & Maintenance
To clean and maintain the lamp, follow these instructions:
- Unplug the lamp from the electrical outlet before cleaning.
- Use a clean, dry, lint-free cloth to wipe the lamp.
- Avoid using water or other chemical cleaning agents.
FAQ
Question: Can I use a different type of bulb?
Answer: No, you should only use a 40W Candelabra base Type B bulb or lower.
Question: Is this lamp suitable for outdoor use?
Answer: No, this lamp is designed for indoor use only.
Question: What should I do if the plug does not fit in the outlet?
Answer: If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Question: Can I cover the lamp with cloth or paper?
Answer: No, covering the lamp with any object including cloth or paper is a fire hazard and should be avoided.
Question: Can I touch the bulb immediately after turning off the light?
Answer: No, the bulb will be hot after use. Allow it to cool down before handling.
Instruction Manual
Questions?
E-mail our customer service department at
[email protected]
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature. This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.
ASSEMBLY INSTRUCTIONS
- Unscrew the socket nut and remove the lamp shade. Remove the protective plastic. Return the lamp shade to the body and secure with socket nut.
- Install bulb. Only use bulb of specified type and maximum rated wattage or less.
- Assembly is complete
- Plug the electrical supply cord into the wall outlet. Use the rotary switch located on the cord to turn the lamp on/off.
CLEANING & MAINTENANCE:
- Unplug the fixture before cleaning.
- Use a clean, dry, lint-free cloth.
- Do not use water or other chemical cleaning agents.
LIMITED WARRANTY
All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:
-
Limited Warranty.
Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If the products do no conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty, Manufacturer shall, as its own expense, furnish replacement products or, at Manufacturer’s option, replacement parts for the defective products. Installation of the replacement products or replacement parts shall be at Buyer’s expense. -
Exclusive Obligation:
THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Manufacturer shall be to repair or replace the defective products in the manner and for the period provided
above. Manufacturer shall not have any other obligation with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall Manufacturer be liable for incidental, special, or consequential damages. -
Other Statements.
Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty. -
Entire Obligation.
This Limited Warranty states the entire obligation of Manufacturer with respects to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.
ALL THE RAGES INC
355 EISENHOWER PARKWAY SUITE 101 LIVINGSTON, NJ 07039
WWW.ALLTHERAGES.COM
PRINTED IN CHINA