HPC TOR-MLFPK25X8-L-FLEX Match Lit Fire Pit Insert Instruction Manual
- June 15, 2024
- HPC
Table of Contents
FIRE INSPIRED®
CSA CERTIFIED-OUTDOOR USE ONLY
FOR COMMERCIAL AND RESIDENTIAL USE
TOR-MLFPK25X8-L-FLEX Match Lit Fire Pit Insert
MATERIAL: 304 STAINLESS STEEL
PART NUMBER | DIMENSION CHART |
---|---|
PAN | STANDARD BTU |
LINE LENGTH
PENTA| TORPEDO
TOR-| MLFPK25X8-L-FLEX| 25″| 50K| 65K| 36″
TOR-| MLFPK37X8-L-FLEX| 37″| 65K| 65K| 36″
TOR-| MLFPK49X8-L-FLEX| 49″| 65K| 65K| 36″
FOR TORPEDO BURNERS ADD TOR-
NOTES:
-
PROPER VENTING
• ENCLOSURES
• For Fire Pit Inserts upto 65K BTU: Required 2 vents, 18 sq.in. each on opposing sides.
• BOWLS (Copper, concrete or metal) – Bowl to be raised above mounting surface minimum of 3/4 gap; Bowl to have a minimum of 6″ diameter hole in bottom -
GAS SUPPLY
• Natural Gas: Supply Pressure: Minimum: 3 5″ W.C ; Maximum: 7.0″ W .C
• LP Gas: Supply Pressure: Minimum: 8.0″ W.C_; Maximum 11.0″ W.C
IMPORTANT: Ensure any flex line that may be used from the permanent main fuel supply to the product is rated to the stated max btu of the product and certified to ANSI Z21.75*CSA 6.27. -
MODIFCATION OF PRODUCT WILL VOID ANY CERTIFICATION AND WARRANTY.
-
FOLLOW ALL MANUFACTURER INSTALLATION INSTRUCTIONS AND LOCAL CODES
-
ALL DIMENSIONS ARE CONSIDERED TRUE AND REFLECT MANUFACTURER’S SPECIFICATIONS AS OF THE REVISION DATE
-
DO NOT SCALE DRAWING.
-
THESE DRAWINGS ARE FOR SIZING AND PLANNING PURPOSES. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE
TIME OF DEVELOPMENT. THE MANUFACTURER’S RESPONSIBLE FOR THE ACCURACY OF THE DRAWING -
CONTRACTOR’S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info. REFERENCE NUMBER 771-025
MATCH LIT FIRE PIT INSERT – WITH FLEX LINE
LINEAR PAN – MLFPK
HEARTH PRODUCTS CONTROLS
2225 LYONS RD.
MIAMISBURG, OH 45342
TOLL FREE: 877.585.9800
PHON589.37-436-9300
www.hpctire.com
REVISION DATE 11/29/2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>