HPC Fire TOR-MLFPK18-SQBL-FLEX Match Lit Fire Pit Insert Instruction Manual
- June 15, 2024
- HPC Fire
Table of Contents
HPC Fire TOR-MLFPK18-SQBL-FLEX Match Lit Fire Pit Insert
DIMENSION
FIRE INSPIRED®
CSA CERTIFIED-OUTDOOR USE ONLY
FOR COMMERCIAL AND RESIDENTIAL USE
MATERIAL: 304 STAINLESS STEEL
__
PART NUMBER
| DIMENSION CHART
---|---
PAN| STANDARD BTU| A”| STND FLEX LINE LENGTH
PENTA| TORPEDO
TOR-| MLFPK18-SQBL-FLEX| 18″X18″| 65K| 65K| 45″| 36″
TOR-| MLFPK24-SQBL-FLEX| 24″X24″| 65K| 65K| 54″| 36″
TOR-| MLFPK30-SQBL-FLEX| 30″X30″| 65K| 65K| 54″| 36″
FOR TORPEDO BURNERS ADD TOR
NOTES:
-
PROPER VENTING
- ENCLOSURES:
- For Fire Pit Inserts upto 65K BTU: Required 2 vents, 18 sq.in. each on opposing sides.
- BOWLS (Copper, concrete or metal) – Bowl to be raised above mounting surface minimum of 3/4″ gap;
Bowl to have a minimum of 6″ diameter hole in bottom
-
GAS SUPPLY
- Natural Gas: Supply Pressure: Minimum: 3.5″ W.C.; Maximum: 7.0″ W.C.
- LP Gas: Supply Pressure: Minimum: 8.0″ W.C.; Maximum 11.0″ W.C. and certified to ANS 221. 5-C SA 62 may be used from the permanent main fuel supply to the product is rated to the stated max blu of the product
-
MODIFCATION OF PRODUCT WILL VOID ANY CERTIFICATION AND WARRANTY.
-
FOLLOW ALL MANUFACTURER INSTALLATION INSTRUCTIONS AND LOCAL CODES.
-
ALL DIMENSIONS ARE CONSIDERED TRUE AND REFLECT MANUFACTURER’S SPECIFICATIONS AS OF THE REVISION DATE.
-
DO NOT SCALE DRAWING.
-
THESE DRAWINGS ARE FOR SIZING AND PLANNING PURPOSES. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT. THE MANUFACTURER’S RESPONSIBLE FOR THE ACCURACY OF THE DRAWING.
-
CONTRACTOR’S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info
REFERENCE NUMBER 771-063
MATCH LIT FIRE PIT INSERT – WITH FLEX LINE
BOWL SQUARE PAN – MLFPK
HEARTH PRODUCTS CONTROLS
2225 LYONS RD.
MIAMISBURG, OH 45342
TOLL FREE: 877.585.9800
PHONE: 937.436.9800
www.hpcfire.com