Origin 21 LFV9105AX-01 TRENTON 5 Light Matte Back Modern Contemporary Damp Rated Chandelier Instruction Manual
- June 15, 2024
- Origin 21
Table of Contents
Origin 21 LFV9105AX-01 TRENTON 5 Light Matte Back Modern Contemporary Damp Rated Chandelier
Thank you
Thank you for purchasing this origin 21 product. We’ve created these easy-to-
follow instructions to ensure you spend your time enjoying the product instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
888-251-1026, 8 a.m. – 8 p.m., EST,
Monday – Sunday.You could also contact us at
ascs@lowes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
• Visit lowes.com for more information.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulb will not light. |
- Bulb is burned out.
- Faulty wire connection.
|
- Replace light bulb
- Check wiring
CARE AND MAINTENANCE
- Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size.
INSTALLATION OVERVIEW
- Turn off the power and remove existing fixture.
Adjust arms of fixture body (J) evenly.
Unscrew the cap nuts C from mounting screws B. Attach A to outlet box using AA.
Temporarily place D through B to determine amount of adjustment necessary for B.
Pull cord taut, then attach rod assembly together.
Note: To ensure proper assembly, make sure to route the wires through the
ends of the rods with the threaded nipple first.
Unscrew the K/D rings F from chain E. Adjust chain E to desired length. Spread the chain link using standard pliers (not included) and screwdriver (not included) and twist chain link in opposite direction and remove the extra chain lengths.
Feed wires. Twist stripped ends of the white, ribbed or tinned wire without writing from the fixture evenly against the white wire from the outlet box. Connect the black, smooth or un-tinned wire with writing from the fixture to the black wire from the outlet box in the same manner. Snip ends. Attach copper wire to ground wire.
Attach BB to connections with electrical tape (not included).
Lift D up over B, securing in place with previously removed C.
Install light bulbs (not included). Use 60-watt max. candelabra-base
incandescent bulbs or CFL/LED equivalents.
Install light bulbs (not included). Use 60-watt max. candelabra-base
incandescent bulbs or CFL/LED equivalents.
Assembly is complete. Turn poweR back on.
ORIGIN 21 and logo design are trademarks or registered trademarks of LF,LLC. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>