Origin 21 JVB1681L Glen Hallow 1-Light 11-in Pewter Integrated Outdoor Wall Instruction Manual
- June 2, 2024
- Origin 21
Table of Contents
- Origin 21 JVB1681L Glen Hallow 1-Light 11-in Pewter Integrated Outdoor
- TROUBLESHOOTING
- CARE AND MAINTENANCE
- WARRANTY
- FEELING CONFIDENT? START YOUR NEXT PROJECT
- SAFETY INFORMATION
- PREPARATION
- PACKAGE CONTENTS
- HARDWARE CONTENTS
- INSTALLATION OVERVIEW
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Origin 21 JVB1681L Glen Hallow 1-Light 11-in Pewter Integrated Outdoor
Wall
Thank you for purchasing this Origin 21 product. We’ve created these easy-to-
follow instructions to ensure you spend your time enjoying the product instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service
department at 888-251-1026, 8 a.m. – 8
p.m., EST, Monday – Sunday. You could also contact us at
partsplus@lowes.com.
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
---|
LED chips will not light.
| 1. Faulty wire connection.
2. Faulty switch.
| 1. Check wiring.
2. Test or replace switch.
CARE AND MAINTENANCE
- Wipe with damp cloth or use window cleaner.
- Do not use abrasive cleansers.
- Bulb Information: 15-watt integrated LED included; do not attempt to replace the LEDs.
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years limited from the date of purchase.
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Not workable for dimming circuits.
- Use only the supplied LED driver to power fixture.
- DO NOT touch the LED model
- Minimum starting temperature for lamp is -0˚F
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Please note that changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
- Importer Name: Lowe’s Home Centers LLC
- Importer Address: 1000 Lowe’s Blvd. Mooresville, NC 28117
- Telephone number: 888-251-1026
- Product Name: Outdoor wall light
- Model No.: JVB1681L & JVB1681L PW
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15-20 minutes
TOOLS REQUIRED (NOT INCLUDED)
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size.
INSTALLATION OVERVIEW
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>