Origin 21 43018 Maren 1 Light Matte Black Modern Contemporary LED Dry Instruction Manual

Origin 21 43018 Maren 1 Light Matte Black Modern Contemporary LED Dry

Product Information

Specifications

• Model: #43018
• Trademark: ORIGIN 21 and logo design
• Manufacturer: LF, LLC
• Estimated Assembly Time: 35 minutes

Package Contents

The package includes the following items:

• A – Item A
• B – Item B
• C – Item C
• D – Item D
• E – Item E
• F – Item F

Hardware Contents

The hardware contents include:

• AA x 3 – Item AA (quantity: 3)
• RR x 2 – Item RR (quantity: 2)
• 1 – Ground Screw
• 2 – Outlet Box
• 3 – White Wire (neutral)
• 4 – Bare/Green Wire (ground)
• 5 – Black Wire (hot)
• 6 – Bare/Desnudo Wire (ground)
• 7 – White/Blanco Wire (neutral)
• 8 – Black/Negro Wire (hot)

Product Usage Instructions

Step 1: Assembly

Follow the steps below to assemble the product:

1. Identify all the package contents and hardware contents.
2. Using the necessary tools (not included), attach Item A to Item B.
3. Connect Item C to Item B using the provided screws.
4. Attach Item D to Item C.
5. Secure Item F to Item D.
6. Finally, attach Item E to Item F.

Step 2: Installation

To install the product, follow these instructions:

1. Locate an appropriate outlet box (caja de salida) for installation.
2. Ensure the outlet box is properly grounded by using the Ground Screw (Tornillo de puesta a tierra).
3. Connect the wires as follows:
   • White Wire (neutral) – Connect it to the White/Blanco Wire (neutral) in the outlet box.
   • Bare/Green Wire (ground) – Connect it to the Bare/Desnudo Wire (ground) in the outlet box.
   • Black Wire (hot) – Connect it to the Black/Negro Wire (hot) in the outlet box.

Step 3: Operation

To operate the product, follow these steps:

1. Ensure the product is properly installed and connected to a power source.
2. Turn on the power switch or use the designated control buttons to activate the product.

Care and Maintenance

Proper care and maintenance of the product will ensure its longevity and optimal performance. Follow these guidelines:

• Regularly clean the product using a soft cloth and mild detergent.
• Avoid exposing the product to extreme temperatures or moisture.
• Inspect the product for any signs of damage or wear and replace any faulty parts immediately.

FAQ

Q: Where can I find the necessary tools for assembly?

A: The necessary tools are not included with the product. You can find them at most hardware stores.

Q: Can I install the product without a grounded outlet box?

A: No, it is important to ensure the outlet box is properly grounded for safe installation and operation of the product.

ORIGIN 21 and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

MODEL/MODELO #43018

Thank you for purchasing this ORIGIN 21 product. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 888-251-1026, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at ascs@lowes.com.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product./Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto.

WARNING

• Installing a fixture into an electrical system not having a proper grounding means for grounding could allow all metal parts of the fixture to carry electrical current if any of the fixture wires, wire connections or splices become broken, cut, or loose. Anyone coming in contact with the fixture is subject to electrical shock, which could cause serious injury or death.
• Wire connectors will not support the weight of this fixture. Suspending this fixture by the supply wires and wire connectors will result in the fixture falling, with the possibility of personal injury and the danger of electrical shock or fire.

CAUTION

• Do not use bulbs having a wattage greater than the maximum value stated on the fixture. The use of a higher wattage lamp(s) than specified will increase temperatures and may cause risk of fire.
• Make sure that all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with installing electrical wiring.
• Turn off electricity at main fuse box (or circuit breaker box) before beginning installation.

CARE AND MAINTENANCE

Shut off the main power supply before you begin any maintenance tasks. Periodically clean the fixture using a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive agents and do not spray liquid cleaner directly onto the bulb or wiring.

FEELING CONFIDENT? START YOUR NEXT PROJECT/¿

Visit www.lowes.com for more information.

SAFETY INFORMATION

CAUTION

• All fixtures must be mounted to an outlet box that is supported by the building structure. Do not attempt to support the fixture by drywall alone. The fixture may fall and cause personal injury.
• Do not connect the fixture’s ground wire (green or bare) to the black (hot) current carrying or white (neutral) supply wire from the outlet box
• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

WARRANTY

The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If within this period the product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The manufacturer will, at its option, repair, replace or refund the purchase price to the consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply. This warranty gives you specific rights and you may also have other rights which may vary from state to state.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 35 minutes

TOOLS REQUIRED (NOT INCLUDED)

PACKAGE CONTENTS

HARDWARE CONTENTS

INSTALLATION OVERVIEW

Turn OFF the electrical power at the main fuse or circuit breaker.

Loosen the ground screw on the mounting bracket (A) and wrap the bare wire from the fixture around the ground screw. Tighten the ground screw to hold the bare wire in place. Connect black fixture wire to black supply wire. Connect white fixture wire to white supply wire. Connect fixture ground wire to supply ground wire. If supply wire colors differ from these, contact a professional electrician to determine proper wiring.

Restore the power at the main fuse or circuit breaker.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>