Origin 21 LFL8203AX-01 CYPRUS 3 Light 18 in Matte Back Semi Flush Mount Light Instruction Manual
- June 15, 2024
- Origin 21
Table of Contents
**Origin 21 LFL8203AX-01 CYPRUS 3 Light 18 in Matte Back Semi Flush Mount Light Instruction Manual
**
Thank you for purchasing this origin21 product. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 888-251-1026, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at ascs@lowes.com.
TROUBLESHOOTING
PROBLEM PROBLEMA| POSSIBLE CAUSE CAUSA POSIBLE| CORRECTIVE ACTION ACCIÓN
CORRECTIVA
---|---|---
Bulb will not light. La bombils no enceinte.|
- Bulb is burned out./La bombils seta quemados
- Faulty wire connection./La connexon de loss cables as incorrect.
| 1. Replace light bulb./Replace la bombils. 2. Check wiring./Revise el cable ado.
CARE AND MAINTENANCE/
- Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.
PREPARATION/PREPARACIÓN
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT
- Visit lowes.com for more information
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
CAUTION/PRECAUCIÓN
- Connect fixture to supply wires rated for at least 167 F.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note : Hardware shown actual size
INSTALLATION OVERVIEW/DESCRIPCIÓN GENERAL DE LA INSTALACIÓN
Turn off the power and remove existing fixture.
Unscrew the cap nuts C from mounting screws B. Attach A to outlet box using AA.
Temporarily place D through B to determine amount of adjustment necessary for B.
Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
Attach BB to connections with electrical tape(not included).
Lift D up over B, securing in place with previously removed C.
Unscrew socket rings G from sockets on fixture body E
Attach glass shades F over the sockets. Secure with socket rings G.
.Install light bulbs (not included). Use 60-watt max. standard-base incandescent bulbs or CFL/LED equivalents
Assembly is complete. Turn power back on.