Origin 21 LCS3001LX-01 BROOKLYN 16.3 in Matte Back LED Flush Mount Light ENERGY STAR Instruction Manual
- June 15, 2024
- Origin 21
Table of Contents
Origin 21 LCS3001LX-01 BROOKLYN 16.3 in Matte Back LED Flush Mount Light
ENERGY STAR
Product Information
Specifications
- Model: #LCS3001LX-01
- Trademark: ORIGIN 21
- Made in: China
Product Usage Instructions
Package Contents
- A x 1 (preassembled)
- B x 2 (preassembled)
- C x 1
Hardware Contents
- AA x 2
- BB x 3
Assembly Instructions
- Attach A to the outlet box using AA.
- Attach BB to the connections with electrical tape (not included).
- Attach B to the product.
- Attach C to the product.
Contact Information
If you have any questions or problems, please call our customer service
department at 888-251-1026, 8 a.m. – 8
p.m., EST, Monday – Sunday. You could also contact us at
ascs@lowes.com
Additional Information
Caution : Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
FAQ
Problem:
LED chips will not light.
Possible Cause:
- Check wiring.
- Test or replace the switch.
Thank you for purchasing this Origin 21 product. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number, and refer to the Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service department at 888-251-1026, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at ascs@lowes.com
SAFETY INFORMATION
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Importer Name: Lowe’s Home Centers LLC
Importer Address: 1000 Lowe’s Blvd. Mooresville, NC 28117
Telephone number : 888-251-1026
Product Name : 16-in LED Flushmount Light
Model No.: LCS3001LX-01
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Assistance may be required to support the fixture during installation.
CAUTION
- Connect the fixture to supply wires rated for at least 194˚F.
- Workable for dimming circuits.
- Use only the supplied LED driver to power the fixture.
- DO NOT touch the LED model.
- The minimum starting temperature for the lamp is -0˚F.
PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 15-20 minutes.
TOOLS REQUIRED
(NOT INCLUDED)
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Turn off the power and remove the existing fixture.
- Unscrew the mounting screws (B) from the fixture body (C). Save for later use. Separate the mounting plate (A) from the fixture body (C).
- Attach A to the outlet box using AA. Conecte A a la caja de salida con AA.
- Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
- Attach BB to connections with electrical tape (not included).
- Place fixture body (C) over mounting plate (A), securing with previously removed mounting screws (B).
- The assembly is complete. Turn the power back on.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| LED chips will not light. | 1. Faulty wire connection. |
2. Faulty switch.
| 1. Check wiring.
2. Test or replace switch.
CARE AND MAINTENANCE
- Wipe with damp cloth or use window cleaner. Do not use abrasive cleansers.
- Bulb Information: 16-watt integrated LED included; do not attempt to replace the LEDs.
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years limited from the date of purchase.
FEELING CONFIDENT?
START YOUR NEXT PROJECT
Visit lowes.com for more information.
ORIGIN 21 and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>