niko 353-802011 Motion Detector User Manual
- June 15, 2024
- niko
Table of Contents
niko 353-802011 Motion Detector
Product Information
Specifications
- Article number: 353-802011
- Configuration: 230 V Secondary detector
- Input voltage: Not specified
- Maximum power consumption: 0.2 W maximum
- Circuit breaker: MCB rating 16 A*
- Detection angle: Not specified
- Detection range (PIR): Not specified
- Ambient temperature: Not specified
- Mounting method: Surface mounting
- Mounting height: Not specified
- Colour: White (RAL 9010)
- Dimensions visible (HxWxD): 100 x 100 x 70.7 mm
- Dimensions (HxWxD): 100 x 100 x 70.7 mm
- Wire capacity: 50 m
- Operating frequency: 2.4 GHz
- Maximum radio frequency power: -2 dBm
- Protection degree: IP54
- Impact resistance: IK04
- Modification of settings: Halogen-free
- Marking: CE
Product Usage Instructions
Installation
To install the Motion Detector 353-802011, follow the steps below:
- Mount the detector using the surface mounting method.
- Connect the wiring according to the specifications provided.
- If you want to use the contact as a dry contact (potential-free), remove the indicated component. Note that this product must be secured with a miniature circuit breaker (MCB) of maximum 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
Dismantling
To dismantle the Motion Detector 353-802011, follow the steps below:
- Follow the reverse of the installation steps to remove the detector from its mounted position.
LED Behaviour
The LED indicators on the Motion Detector have different meanings:
- Green LED continuous on Connection OK
- Green LED flashing: Warming up
- Red LED continuous on Error
- Blue LED flashing: Walk test active
App Settings
You can modify the settings of the Motion Detector using the app settings.
Some available options are:
- Factory Settings
- Sensitivity: High
Troubleshooting
If you are experiencing issues with the Motion Detector, please refer to
the troubleshooting section in the user manual or contact customer support for
assistance.
FAQ
- Q: What is the maximum wire capacity for this product?
- A: The maximum wire capacity for the Motion Detector is 50 meters.
- Q: What is the operating frequency of this product?
- A: The operating frequency of the Motion Detector is 2.4 GHz.
- Q: What is the protection degree of this product?
- A: The Motion Detector has a protection degree of IP54.
- Q: Is the Motion Detector halogen-free?
- A: Yes, the Motion Detector is halogen-free.
Motion detector M41HC, 230 V, secondary, high ceiling, 18-53 m, 360°, for surface mounting
Wiring
230 V – OFF
Remove if you want to use the contact as a dry contact (potential-free).
This product must be secured with a miniature circuit breaker (MCB) of max. 16
A in the electrical cabinet. The MCB rating is limited by national
installation rules.
Dimensions
Installation
If a grommet needs to be replaced, please make sure the new grommet is halogen-free.
Dismantling
App settings
LED behaviour
Specifications
- Article number 353-802011
- Configuration 230 V Secondary detector
- Input voltage 230 Vac ± 10 %, 50 Hz
- Maximum power consumption 0.2 W
- Circuit breaker maximum MCB rating 16 A*
- Detection angle 360 °
- Detection range (PIR) Ø 53 m from a height of 12 m
- Ambient temperature -25 – +40 °C
- Mounting method surface mounting
- Mounting height 4 – 12 m
- Color white (RAL 9010)
- Dimensions visible (HxWxD) 100 x 100 x 70.7 mm
- Dimensions (HxWxD) 100 x 100 x 70.7 mm
- Wire capacity 1.5/2.5 mm²
- Maximum range Bluetooth® (free field, depending on the device) 50 m
- Operating frequency 2.4 GHz
- Maximum radio frequency power -2 dBm
- Protection degree IP54
- Impact resistance IK04
- Modification of settings app (iOS/Android) and 2-way Bluetooth® communication
- Halogen-free yes
- Marking CE
The MCB rating is limited by national installation rules.
Detection area
Troubleshooting
Support & contact
nv Niko sa Industriepark West 40 9100 Sint-Niklaas, Belgium
+32 3 778 90 80 support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as complete, correct, and up-to-date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>